813420
31
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
31
Servicing Instructions - Replacing Parts
10. Ignition Lead
To replace the ignition lead:
10.1 Release the Main Control Assembly and tilt backwards,
see Section 8.
10.2 Remove the ignition lead from the control box,
see Diagram 20.
20
10.3 Remove the ignition lead from the electrode, see Diagram
20, removing cable ties where necessary.
10.4 Note the direction of the lead. The new lead must follow
exactly the same route. Replace cable ties where
necessary.
NOTE: THE IGNITION LEAD MUST NOT PASS IN FRONT
OF THE CONTROL BOX AS THIS CAN DAMAGE THE
SENSITIVE ELECTRONICS.
11. Gas Valve
To change the gas valve:
11.1 Remove the control assembly, see Section 8.
11.2 Release the gas inlet pipe, see Diagram 21, Arrow A.
B
A
C
D
21
11.3 Remove the thermocouple from the interrupter block and
release the second thermocurrent cables.
11.4 Release the pilot pipe, see Diagram 21, Arrow B.
11.5 Release the injector feed pipe, see Diagram 21 Arrow C.
11.6 Remove the wire cable, see Diagram 21, Arrow D.
11.7 Remove the two nuts securing the valve to the support
bracket and withdraw the valve.
11.8 Replace in reverse order.
12. Magnetic Safety Valve
To replace the magnetic safety valve:
12.1 Undo the thermocouple from the interrupter block and
remove the two interrupter leads.
12.2 Unscrew the interrupter block from the back of the valve.
12.3 Undo the silver magnetic valve retaining nut on the back of
the valve.
12.4 Gently tap out the mag valve.
12.5 Replace with a new unit.
12.6 Reassemble in reverse order ensuring that the interrupter
leads are connected correctly with the red tag lead nearest
to the gas valve body.
13. Control Box
13.1 To replace the control box first remove the main control
assembly, See Section 7.
13.2 Remove the two thermocurrent cables by removing the two
screws, Diagram 22.
13.3 Remove the ignition lead, Diagram 22.
13.4 Remove the eight wire loom from the control box.
13.5 Remove the battery extension cable, Diagram 22.
The control box can now be replaced.
When replacing the sealing plate on the rear of the control
cover use a suitable silicone sealant.
Battery
extension
cable
Eight wire
cable
Thermo current
cables
Ignition lead
22
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gazco Riva Vision Large 50000 serie Balanced Flue Instructions bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gazco Riva Vision Large 50000 serie Balanced Flue Instructions in de taal/talen: Engels als bijlage per email.

De handleiding is 3.52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info