813469
12
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
12
1. Fault Finding
No illumination or uneven lighting:
1.1 Check the heater is working. If YES, one or more of the
LED boards will need replacing. This must be undertaken by
a suitably qualified person (see Servicing Requirements).
1.2 If NO, first change the 13amp fuse for one known to work. If
the fire still does not work, check the socket by plugging in a
working appliance. If this too fails to operate, call in a
competent electrician to check the socket.
Illumination but no heat:
1.3 The safety cut-out has operated to protect against
overheating (see User Instructions, Section 2). Ensure the
air inlet and outlet grilles are free of dust or any other
obstruction.
1.4 The thermostat control dial may be set too low. Turn the dial
clockwise until the heater turns on.
Remote control fails to work:
1.5 Check that the batteries are new and correctly fitted.
Replace if necessary.
1.6 Ensure that the handset is pointed towards the fire.
2. How to wire a plug
To change the plug supplied with this fire, follow the
instructions below. The instructions assume that the wire
has been cut.
WARNING – FAILURE TO CONNECT THE WIRES
CORRECTLY COULD PUT PEOPLE AT RISK FROM
ELECTRIC SHOCK OR FIRE. IF IN DOUBT CONSULT
A QUALIFIED ELECTRICIAN.
UK Plug
Suitable for use in Cyprus, Malta, Ireland & Great Britain.
Earth wire
Neutral wire
Outer Insulation
Fuse
Cable grip
1UK Plug Supplied
Type 33
Live wire
Live Wire Brown Terminal L / RED
Neutral Wire Blue Terminal N / BLACK
Earth Wire Green & Yellow
Stripes Terminal E / / GREEN or
GREEN & YELLOW
THIS APPLIANCE MUST BE EARTHED.
European Plug
Suitable for use in Austria, Belgium, Bulgaria, Czech
Republic, Denmark, Estonia, Finland, France, Greece,
Hungary, Germany, Italy, Latvia, Lithuania, Luxembourg,
Netherlands, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain & Sweden.
Cable gripOuter Insulation
Neutral wire
Earth wire
Live wire
2Typical European Plug
Type 15/16/17
2.1 Dispose of the old plug safely. Ensure the new plug is not
cracked or chipped.
2.2 Expose 4cm of the coloured wires and trim to the correct
lengths so that they comfortably reach the correct terminals.
2.3 Ensure that the Earth wire has more slack than any of the
other wires.
2.4 Remove some of the insulation to leave about 1cm of
exposed metal core on each wire.
2.5 Twist the strands of the wire together.
2.6 Loosen the screw heads above each terminal.
2.7 Push the metal wire into the hole beneath each screw head
or, dependent on plug design, wind the metal wire around
the screw.
2.8 Ensure that the insulation reaches right up to each terminal
as illustrated and there are no loose strands of wire.
2.9 Ensure the cable sits correctly under the cable grip and
tighten to secure.
2.10 Refer to Technical Specification for fuse rating and fit the
appropriate fuse into the plug.
2.11 Attach the plug cover.
Servicing Instructions
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gazco Marlborough - Electric bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gazco Marlborough - Electric in de taal/talen: Engels als bijlage per email.

De handleiding is 4.66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Gazco Marlborough - Electric

Gazco Marlborough - Electric Gebruiksaanwijzing - Nederlands - 20 pagina's

Gazco Marlborough - Electric Gebruiksaanwijzing - Français - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info