813395
15
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
15
INSTALLATION INSTRUCTIONS
INSTALLATION
3. INSTALLATION OF THE STOVE
3.1 Remove the outer sleeve and packaging from the stove.
3.2 Open the door by pushing on the bottom right of the door
to release it.
3.3 Open the door to a 90° angle.
3.4 Lift the door off the two hinge pins on the left.
1
AR1453
3.5 To remove the glass frame unscrew the eight pozi drive
screws.
2
AR1454
Important: Make sure the stove is adjusted for the gas
type and category in its country of use. Refer to the data
badge and Technical Specification page. For details of
changing between gas types refer to Replacing Parts,
Changing Between Gas Types.
1. SAFETY PRECAUTIONS
1.1 This stove must be installed in accordance with the rules in
force. You must read these instructions before installing the
stove.
1.2 All the instructions must be left intact with the user.
1.3 In the interests of your own and other’s safety, this stove
must be installed by a competent person according to local
and national codes of practice. Failure to install the stove
correctly could lead to prosecution.
1.4 This stove is for use on a governed gas installation and set to
the required pressure.
1.5 Keep all plastic bags away from young children.
1.6 Do not place any object on or near the stove. Leave
adequate clearance above the stove (Site Requirements,
Stove Location, Diagram 7).
2. CONTROL UPGRADE
2.1 The stove is fitted with a control valve that can be upgraded
to support a battery powered remote control. Two types of
remote control can be obtained through your local Gazco
stockist:
2.2 This upgrade can be fitted before or after installation, but, if
side clearances are limited, it will be easier to upgrade the
stove before installation. Full instructions are included with
the kit.
2.3 The Standard Remote Control (Gazco Part No. 8455)
controls the gas stove after the pilot is lit so you can regulate
the main burner through its range of settings and turn the
burner off leaving just the pilot lit.
2.4 The Thermostatic and Timer Remote Control (Gazco Part
No. 8456) controls the stove after the pilot is lit using three
modes:
Manual Mode – used to turn the burner on and off and
regulate it through its range of settings.
Auto Mode – used to turn the burner on and off and
regulate the heat to a pre-set temperature.
Timer Mode – used to turn the burner on and off at two
pre-set times and regulate the heat to a pre-set
temperature during those periods.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gazco F40 Avanti Balanced Log bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gazco F40 Avanti Balanced Log in de taal/talen: Engels als bijlage per email.

De handleiding is 3.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info