67
• Removetheportafilter and frothing attachment. Pour the mixture of the discaler and water
into the water tank.
• Plugthemachineintothepoweroutlet.
• PressthePOWERbuttontotheon-position.
• Placealargecontainerunderthegroupheadandsteamwand.
• Whenthebrewingtemperaturehasbeenreachedallthebuttonsurroundsonthecontrolpanel
will illuminate. Press and hold the one cup and two cup button to commence manual pour. Release
the button once half the mixture of white vinegar and water has run through the group head.
• Afterdecalcifying,removethewatertankandrinsethoroughlythenrefillwithfreshcold
water. To rinse the machine, repeat previous steps.
Note:Equipmentdamagecausedbycalciumdepositsinandontheunitarenot.Partof
the warranty. If you are sending your device to a technical review want, please attach any
attachments such. as filter support and drip tray at.
CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on burr heads which can impede performance.
CLEANING THE STEAM WAND AND FROTHING ATTACHMENT
• Thesteamwandandfrothingattachmentshouldalwaysbecleanedafterfrothingmilk.
• Removethefrothingattachmentandrinseinwarmtapwater.
• Wipethesteamwandwithadampcloth,andthenwiththesteamwanddirectedback
into the drip tray, briefly set the steam dial to the STEAM-position. This will clear any remai-
ning milk from inside the steam wand.
• EnsurethesteamdialisintheSTANDBY-position.PressthePOWERbuttontooffand
allow the machine to cool.