714651
66
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
66
CAUTION: Do not remove the motor unit from the chopper lid during operation
to avoid damage to the drive wheel and coupling. If the motor slows down notice-
ably during operation or stalls, immediately switch OFF the appliance (release the
“Pulse” button, slide the speed selector to “0”). See: ‘Solving Problems’.
Ensure that the drive coupling of the chopper lid is completely clean and dry, before
assembling the motor unit at the chopper system to avoid pollution and damage to
the drive wheel of the motor unit. Additionally, you should keep the drive coupling
of the chopper knife and chopper lid clean and dry, when assembling the chopper
system to allow proper functioning.
Assembling the Chopper System
Important: Do not overfill the chopper container to avoid overflow. The chopper
system is not suited for processing liquids (see: ‘Tips for Best Results’).
Note
The top of the chopper lid is shaped to fit into the drive wheel at the rear end of
the motor unit. The drive wheel is protected by an automatically closing shutter.
Before attaching the chopper system to the motor unit, you must open the shutter.
1. Hold the chopper knife by the upper end of the shaft and insert the chopper knife
into the chopper container.
Tip: While filling the chopper container, you may protect the upper shaft end of the
chopper knife via a small beaker or small glass to avoid that food and liquids will
get on the drive coupling of the shaft. Do not forget to remove this item, after filling.
2. Fill the prepared food into the chopper container. Observe the maximum filling
level (MAX) to avoid overflow and ensure a suitable processing result. Ensure
that the coupling at the upper part of the chopper knife is clean.
3. Cover the chopper container with the chopper lid. Turn the chopper lid clock-
wise to the stop for locking the chopper lid on the chopper container.
4. Grasp the chopper system by the handle. It is best to open the shutter of the
drive compartment via the chopper lid. For this, place the motor unit in an upright
position onto the chopper lid and gently slide the motor unit over the top of the
chopper lid to open the shutter. With the shutter open, the motor unit will settle
down on the chopper lid coupling to a stable position.
5. Turn the motor unit by 90° to the lock the motor unit tangibly. The appliance is
ready for operation, if the motor unit is locked securely in place.
66

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gastroback 40983 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gastroback 40983 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 0,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info