522251

Garmin eTrex Handleiding

48
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
owner’s
manual
eTrex
®
personal navigator
™
Basic eTrexCover.indd 1 2/19/2003, 1:09:46 PM
©2000 -2003 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151
st
Street, Olathe, Kansas 66062 U.S.A.
Tel. 913/397.8200
Fax 913/397.8282
Garmin (Europe) Ltd.
Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.
Tel. 44/1794.519944
Fax 44/1794.519222
Garmin (Asia) Corporation
No. 68, Jangshu 2
nd
Road., Shijr, Taipei County, Taiwan
Tel. 886/2.2642.9199
Fax 886/2.2642.9099
All rights reserved. Except as expressly provided herein, no part of this manual
may be reproduced, copied, transmitted, disseminated, downloaded or stored in
any storage medium, for any purpose without prior written consent of Garmin Ltd.
Garmin Ltd. hereby grants permission to download a single copy of this manual
onto a hard drive or other electronic storage medium to be viewed for personal use,
provided that such electronic or printed copy of this manual contains the complete
text of this copyright notice and provided further that any unauthorized commercial
distribution of this manual is strictly prohibited.
Information in this manual is subject to change without notice. Garmin
Ltd. reserves the right to change or improve its products and to make changes in
the content without obligation to notify any person or organization of such changes.
Visit the Garmin web site for current updates and supplemental information con-
cerning the use and operation of this and other Garmin products.
Web site address: www.garmin.com
Garmin
®
and eTrex
®
are registered trademarks of Garmin Ltd. and may not be used
without the express permission of Garmin Ltd.
February 2003 Part Number 190-00205-00 Rev. C Printed in Taiwan
Basic eTrexCover.indd 2 2/19/2003, 1:09:52 PM
1
Welcome
To get the most out of your new eTrex, take the time
to read through this Owner’s Manual to understand the
operating features of the unit. This manual has been
designed to provide all that you need to know to operate
your eTrex.
eTrex Registration
Help us to better support you by completing
your on-line registration today!
Why should you register your eTrex purchase?
• Notifi cation of Product Updates
• Notifi cation of New Products
Connect to our web site (www.garmin.com) and look
for the Product Registration link on the home page. If
your eTrex contains an 8-digit serial number, it can be
found inside the battery compartment.
Thanks for choosing the Garmin eTrex. If you have
any questions or comments regarding the use of the eTrex
you can visit our web site (www.garmin.com) or contact
our Customer Service Department:
M-F, 8:00-5:00 CST (except holidays)
at 1-800-800-1020.
On Your Mark. . .
Introduction
2
Introduction.............................................................. 1-8
Welcome ........................................................................ 1
Warnings and Cautions .................................................. 3
FCC Compliance Statement ........................................... 4
Features.......................................................................... 5
Buttons........................................................................... 6
Description..................................................................... 7
Accessories ..................................................................... 8
Installing the Batteries .................................................... 8
Getting Started ....................................................... 9-17
Satellite Page Basics ...................................................... 10
Map Page Basics ........................................................... 11
Navigation Page Basics ................................................. 12
Main Menu Page Basics ................................................ 13
Creating a Waypoint..................................................... 14
Heading in the Right Direction..................................... 16
Cancelling a GOTO...................................................... 17
Reference ............................................................... 18-39
Map Page Options ........................................................ 18
Navigation Page Options .............................................. 19
Main Menu .................................................................. 20
Mark Waypoint Page .................................................... 20
Waypoints Page............................................................ 22
Review Waypoint Page ................................................. 23
Routes .......................................................................... 25
Tracks........................................................................... 28
Setup Menu.................................................................. 31
Appendices ............................................................ 40-51
Appendix A: Specifi cations........................................... 40
Appendix B: What is GPS? ........................................... 41
Appendix C: Satellite Reception Tips............................ 42
Appendix D: Time Offset Chart.................................... 44
Appendix E: Wiring Diagram ....................................... 45
Appendix F: Troubleshooting ....................................... 46
Appendix G: FAQs ....................................................... 47
Appendix H: Index....................................................... 49
Warranty .................................................................... 52
Introduction
Table of
Contents
3
WARNING: If you choose to use the eTrex in a
vehicle, it is the sole responsibility of the owner/operator
of the eTrex to secure the GPS unit so that it will not cause
damage or personal injury in the event of an accident.
Do not mount the eTrex over airbag panels or in a place
where the driver or passengers are likely to have an
impact with it in an accident or collision.
WARNING: If you choose to use the eTrex in a
vehicle, it is the sole responsibility of the operator of the
vehicle to operate the vehicle in a safe manner, maintain
full surveillance of all driving conditions at all times, and
never become distracted by the eTrex to the exclusion
of safe operating practices. It is unsafe to operate the
eTrex while you are driving. Failure by the operator of
a vehicle equipped with an eTrex to pay full attention
to operating the vehicle and road conditions while the
vehicle is in motion could result in an accident or
collision with property damage and personal injury.
CAUTION: IT IS THE USER’S RESPONSIBILITY TO
USE THIS PRODUCT PRUDENTLY. THIS PRODUCT IS
INTENDED TO BE USED ONLY AS A TRAVEL AID AND
MUST NOT BE USED FOR ANY PURPOSE REQUIRING
PRECISE MEASUREMENT OF DIRECTION, DISTANCE,
LOCATION, OR TOPOGRAPHY.
CAUTION: The Global Positioning System (GPS) is
operated by the government of the United States, which
is solely responsible for its accuracy and maintenance.
The system is subject to changes which could affect the
accuracy and performance of all GPS equipment.
Although the eTrex is a precision electronic NAVigation
AID (NAVAID), any NAVAID can be misused or misinter-
preted and, therefore, become unsafe.
CAUTION: Electronics are protected if immersed,
but the battery compartment may get wet. Make sure the
batteries and compartment are dry before using.
Remove the batteries from
your eTrex if you don’t
expect to use it for several
months. Be sure to
observe the proper
polarity when re-install-
ing batteries. Follow the
battery manufacturer’s
instructions on the proper
care and handling of the
batteries.
Warnings and
Cautions
Introduction
4
The eTrex complies with Part 15 of the FCC limits
for Class B digital devices. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may
cause harmful interference to radio communications.
There is no guarantee that interference will not occur
in a particular instance. If this equipment does cause
harmful interference to other equipment, try to correct
the problem by relocating the equipment.
Consult an authorized Garmin dealer or other quali-
fi ed service technician if the problem cannot be corrected.
Operation is subject to the following conditions: (1) This
device cannot cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired
operation.
The eTrex does not contain any user-serviceable
parts. Repairs should be made only by an authorized
Garmin service center. Unauthorized repairs can void the
warranty.
Introduction
FCC Compliance
Statement
California’s
Proposition 65
WARNING: This product, its packaging, and its
components contain chemicals known to the State of
California to cause cancer, birth defects, or reproductive
harm. This Notice is being provided in accordance with
California’s Proposition 65. If you have any questions or
would like additional information, please refer to our web
site at www.garmin.com/prop65.
5
The eTrex is a six ounce, 12 channel, hand held GPS
receiver. It has a built-in GPS antenna and fi ve user-but-
tons. All buttons are located on the sides of the unit,
allowing for simple, one-handed operation that won’t
obstruct your view of the display. It runs for 22 hours on
two AA alkaline batteries in battery save mode.
In addition to determining your location, the eTrex
creates, names and saves a location (as an electronic
waypoint) in its memory, allowing you to navigate back to
this point any time you want. And once you start moving,
your GPS provides other data, like speed, direction of
movement, time and distance to destination, and more.
From these basic features, your Garmin GPS can
provide one more critical benefi t; peace of mind, because,
with GPS you know where you are, where you’ve been
and where you’re going. And since you always know the
way back home, you can concentrate on what you set out
to do and enjoy the great outdoors.
Other features include:
Waypoints: 500 with name and graphic symbol.
Tracks: Automatic track log; 10 saved tracks
let you retrace your path in both
directions.
Route: Allows you to navigate a course of
up to 50 waypoints in sequence.
Trip Computer: Current speed, average speed,
maximum speed, direction of
movement, bearing, elevation, time
of sunrise/sunset, trip timer and trip
odometer.
NOTE: You should
always be prepared for
and capable of navigat-
ing without the eTrex. It
is designed to augment
other forms of basic
navigation, not entirely
replace them.
Introduction
eTrex Features
6
Operating the eTrex is as simple as pressing a button!
The UP/DOWN Buttons:
• Select options on pages and menus
• Adjust display contrast on Satellite Page
• Zoom in and out on Map Page
• Cycle through trip data on NavigationPage
The ENTER Button:
• Confi rms data entry or menu selections
• Displays options on main pages
• Pressing and holding the ENTER button
activates the Mark Waypoint Page
The PAGE Button:
• Switches between pages and moves you out
of pages. If you start to do something and
you don’t want to continue, you can stop by
pressing the PAGE Button.
The POWER Button:
• Turns the unit on and off
• Turns the display backlight on and off
Introduction
eTrex Buttons
7
DOWN Button
UP Button
ENTER
Button
External Power
and
Data Connector
Internal
GPS Antenna
LCD Display
(with backlight)
POWER
Button
PAGE
Button
Battery
Compartment
Waterproof Case
Introduction
eTrex
Description
8
Standard Accessories
Lanyard
Attaches to a slot on the bottom of the unit for convenient carrying.
Owner’s Manual
Quick Start Guide
Optional Accessories
Carrying Case
Protects the eTrex when not in use.
Belt Clip
Allow easy access to the eTrex when clipped to a belt..
Auto Power Adapter
Provides eTrex operation from an automobile cigarette lighter.
PC Data Cable
Allows for transfer of data from a PC to an eTrex.
Data Cable
Wiring harness. Connections for data input/output.
Bicycle Mounting Kit
Allows the eTrex to be mounted on a bicycle handle bar.
PC Cable/Auto Power Adapter
Allows transfer of waypoints and routes from a PC to the eTrex and provides
unit operation from an automobile cigarette lighter.
MapSource
®
Map Data CD-ROMs
An excellent tool for creating waypoints and routes on your PC using a back-
ground map and downloading them to your eTrex. See your Garmin dealer for
MapSource details.
Installing the Batteries
The eTrex operates on two AA batteries (not
included), which are installed at the back of the unit. To
install the batteries, remove the battery cover by
turning the D-ring on the back of the unit 1/4 turn
counter-clockwise. Insert the batteries observing proper
polarity. Attach the battery cover by turning the D-ring
1/4 turn clockwise. Two AA alkaline batteries should last
about 22 hours in ‘Battery Save’ mode.
Auto Power Adapter
- Converts 12VDC
output from the lighter to
3VDC input to the eTrex.
Not interchangeable
with power adapters for
Garmin VHF 720, 725,
and 725e, or GPS 170,
175, 190, and 195.
PC Interface Cable with
Auto Power Adapter
Bicycle Mounting Kit
Introduction
Accessories
9
The Getting Started Section introduces you to the basic
operation of the eTrex. The Reference Section shows you how
to use all of the eTrex’s remaining features.
The First Step
The eTrex operates on information gathered from
satellites. To gather this information, take your eTrex
outside and fi nd a large, open area that has a clear view of
the sky (a nearby park would work fi ne). Press and hold
the POWER Button to turn the unit on. You’ll see the
Welcome Page for a few seconds while the eTrex performs
a self-test, followed by the Satellite Page.
The eTrex needs to receive at least three strong
satellite signals to fi nd your location. The Satellite Page
displays graphic tracking of satellites, the strength of the
satellite signals, and the satellite tracking status.
The Satellite Page
When you see the “READY TO NAVIGATE” message
on the Satellite Page, the eTrex has found your location
and you are ready to go!
Backlighting and Contrast
If the lighting conditions make it hard for you to see
the screen, you can adjust the contrast or turn on the
backlight. Press and release the POWER Button from any
screen to turn on the backlight. The backlight is timed
to stay on for 30 seconds to save battery power. To
adjust the screen contrast, press the PAGE Button until
you see the Satellite Page. Press the UP Button to make
the screen darker, press the DOWN Button to make the
screen lighter.
The Welcome Page
Getting Started
Here We Go. . .
)
NOTE: When you use the eTrex for the fi rst
time, it will take up to fi ve minutes to fi nd your
location. After the fi rst use, the eTrex needs
only about 15 to 45 seconds to fi nd your loca-
tion.
10
Selecting a Page
All of the information needed to operate the eTrex is
found on four main “pages” (or display screens). These
pages are the Satellite, Map, Pointer, and Menu.
Simply press the PAGE Button to switch between
pages.
Satellite Page Basics
The Satellite Page shows the eTrex gathering all the
necessary satellite information in order to work. There are
two display options on the Satellite Page, Normal Skyview
and Advanced Skyview. Normal Skyview shows you (in
animation), the satellites, satellite signal strength, and the
eTrex’s estimated location accuracy.
To activate the Advanced Skyview page, simply press
ENTER when on the Satellite Page, select ‘Advanced
Skyview’ and press ENTER again. This page displays
the numbered satellites the eTrex is using, their proxim-
ity to your current position, and their individual signal
strengths. To determine the location of the satellites
being used around you, the outer circle of the display
represents the horizon and the center represents the sky
directly overhead.
The “READY TO
NAVIGATE” message
must appear before you
can begin using your
eTrex to navigate.
Page Basics
Getting Started
Status Message
Satellites
Location Accuracy
(estimated)
Satellite Signal
Strength Bars
Map Navigation MenuSatellite
PAG E
PAG E
PAG E
PAG E
PAG E
PAG E
PAG E
PAG E
Pressing ENTER on the
Advanced Skyview Page
also offers the options of
Orienting the Sky Ahead
or Northward, Setup
Display (backlighting/
contrast), and returning
to Normal Skyview.
Normal Skyview
Advanced Skyview
11
The Map Page showing
different symbols and
waypoints.
On the Map Page, the
UP and DOWN Buttons
are used to adjust the
map scale from 200 feet
to 800 miles.
Map Page Basics
The Map Page shows where you are (the animated
fi gure) and provides a real picture of where you are going.
As you travel (the animated fi gure “walks”) and leaves a
“trail” (track log). Waypoint names and symbols are also
shown on the map. We will show you how to record your
location by marking a waypoint in the “Discovering GPS
Navigation” section.
To help you better visualize the “real world”, the eTrex
automatically rotates the map as you move, so that
waypoints that are ahead of you are always displayed in
front of the animated fi gure. The North Pointer always
shows you where north is.
To make sure you can see your entire trip, you can
change the map scale (from 200 feet to 800 miles!) by
pressing and holding the UP Button to view a larger area,
and the DOWN Button for viewing a smaller area.
The Map Page
“You”; Your
Location
North Pointer
Path to
Destination
Destination
Waypoint
Map
Scale
“Trail” (track
log)
Getting Started
Page Basics
12
Navigation Page Basics
The Navigation Page helps guide you to a destination.
When you’re moving with no particular destination in
mind, the Navigation Page shows you your moving direc-
tion and speed. When you’re moving towards a specifi c
destination, the Navigation Page shows you the name of the
location, the distance and time to go, and displays a
direction arrow in the compass ring. To navigate, simply
follow the arrow.
By pressing the UP or DOWN Buttons, you can
cycle through other trip computer information such as
average speed, maximum speed, moving direction
(heading), bearing, position coordinates, elevation, time of
sunrise/sunset, trip timer and trip odometer.
The eTrex is not a magnetic
compass. You must be
moving in order for it to
track your movement.
On the Navigation Page,
the UP and DOWN
Buttons are used to cycle
through different trip
data.
Compass Ring
Time to reach
the Destination
Straight Line
Distance to the
Destination
Waypoint (Location) Name
Direction Arrow
(follow this)
Destination Symbol
The Navigation Page
Speed
Moving Direction
Line
)
NOTE: The direction arrow, destination symbol
and bearing information only appear on the
Navigation Page when you have started a
GOTO, a Route or a TracBack.
Getting Started
Page Basics
13
You can choose from 30
time zones, plus ‘other’.
The Main Menu Page
Backlight
Indicator
Menu Options
Time and Date
Battery
Capacity
Getting Started
Page Basics
From the Main Menu
Page, the UP and
DOWN Buttons are
used to cycle through
menu options and access
advanced features.
Main Menu Basics
The Main Menu gives you access to the eTrex’s more
advanced features. With the Main Menu you can create
and view waypoints, create a route, save and view track
logs or access the system setup features. Information on
all these advanced features is included in the reference
section of this manual.
Changing the Time Zone
Practice using the Main Menu and change the time
zone.
To change the time zone:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Menu appears.
2. Press the UP or DOWN Button and highlight ‘TIME’
and press ENTER.
3. Press the UP or DOWN Button and select the ‘TIME
ZONE’ fi eld and press ENTER.
4. Press the UP or DOWN Button, scroll through the
selections, and press ENTER when you have found
the correct zone. Press PAGE to get back to the
page of your choice.
14
This completes a basic explanation of the page
features of the eTrex.
Discovering GPS Navigation
Discovering how to use your eTrex is as easy as taking
a quick walk around an open outdoor area. In this brief
exercise, you’ll mark your current location (your home
for example), travel a short distance away, and then have
the eTrex guide you back to where you started (to get the
most out of this exercise, make sure to walk for at least
the time noted for each step).
Creating a Waypoint
The fi rst step in the exercise is to mark your location
as a waypoint so you can return to it later.
To Mark a Waypoint:
1. Press the PAGE Button and switch to the ‘MENU’
Page.
2. Press the UP or DOWN Button and highlight the
‘MARK’ fi eld.
3. Press ENTER. The ‘MARK WAYPOINT’ Page appears
with ‘OK?’ highlighted.
Before we actually mark the waypoint, let’s change the
symbol to a house and the name ‘001’ to something a little
more meaningful such as HOME.
To change the waypoint symbol:
1. On the ‘MARK WAYPOINT’ Page, press the UP or
DOWN Button to highlight the small fl ag symbol
and press ENTER. Using the UP or DOWN Button,
scroll through the symbols and highlight the house
symbol. Press ENTER.
NOTE: The eTrex must state “READY TO
NAVIGATE” before you mark a waypoint.
You’ll fi nd the MARK
option on the ‘MENU’
Page.
The Elevation and Posi-
tion Coordinates are
displayed at the bottom
of the ‘MARK
WAYPOINT’ Page and
the ‘REVIEW
WAYPOINT’ Page.
Getting Started
Let the Fun
Begin!
)
15
To change the waypoint name:
1. On the ‘MARK WAYPOINT’ Page, press the UP or
DOWN Button to highlight the Waypoint Name
‘001’.
2. Press ENTER. The ‘EDIT WAYPOINT NAME’ Page
appears.
3. Press ENTER. Using the UP or DOWN Button, scroll
through the letter selections. Select ‘H’ and press
ENTER. Repeat this process and fi nish the word
‘HOME’.
4. Press the UP or DOWN Button to highlight the ‘OK’
fi eld and press ENTER. The ‘MARK WAYPOINT’
Page appears.
5. Press the UP or DOWN Button to highlight the
‘OK’ fi eld and press ENTER. Your location, named
‘HOME’, is now marked and stored in memory.
Now that you’ve marked your location, it’s time to go
for a brisk walk. Press the PAGE Button and switch to
the Map Page.
Walk in a straight line for 3-4 minutes at a
fast pace and watch the Map Page.
Your location is shown by the fi gure in the middle of
the screen. As you move, watch the animated fi gure walk,
and a line—called a “track”—appear along the path you
have just covered.
Now take a sharp right turn and walk at a
brisk pace for another 3-4 minutes.
You can see your change in direction displayed on the
Map .
You can create or edit a
waypoint on the ‘EDIT
LOCATION’ Page. From
the ‘MARK WAYPOINT’
Page, highlight the Posi-
tion Coordinates fi eld
and press ENTER. Then
follow the on-screen
instructions.
The ‘EDIT WAYPOINT
NAME’ Page.
NOTE: As a shortcut, press and hold ENTER to
mark a waypoint.
Getting Started
Edit Waypoints
)
16
Guidance by Garmin
The eTrex guides you to a destination using a GOTO
(GOTO means GOing TO a destination in a direct line).
Now let’s use the GOTO feature and the Navigation Page
to travel back to our starting location.
To Start a GOTO:
1. Press the PAGE Button and switch to the ‘MENU’
Page.
2. Press the UP or DOWN Button and highlight
‘WAYPOINTS’.
3. Press ENTER. The ‘WAYPOINTS’ Page appears.
4. Press the UP or DOWN Button and select the tab
containing ‘HOME’ and press ENTER.
5. Press the UP or DOWN Button to select ‘HOME’
and press ENTER. The ‘REVIEW WAYPOINT’ Page
appears.
6. Press the UP or DOWN Button to highlight the
‘GOTO’, and press ENTER.
The Navigation Page appears and you’re now ready
for the eTrex to guide you back to your starting location!
Heading in the Right Direction
The eTrex will guide you back to where you started
using the Navigation Page. The arrow tells you the direc-
tion to the destination. Walk in the direction the arrow is
pointing until the arrow points to the top of the compass
ring. If the arrow points to the right, you need to go to
the right. If the arrow points to the left, go left. When the
arrow is pointing straight up, you are on the correct track!
The arrow tells you
what direction you
should move. When
the arrow is pointing
right as shown here,
just move right until
the arrow is pointing
straight up and points
to the moving direction
line (see picture below).
When the arrow points
straight up as shown,
you’re on track!
Follow the
Arrow
Getting Started
17
The destination name, distance to the destination and
time to reach your destination are displayed at the top
of the screen. The speed you are traveling is shown at
the bottom of the screen. When you are nearing to your
destination, the eTrex will display the message “ARRIV-
ING DESTINATION”.
Cancelling A GOTO
Anytime you want to stop a GOTO:
1. Press the PAGE Button and switch to the ‘NAVIGA-
TION’ Page. Press ENTER.
2. Highlight ‘STOP NAVIGATION’ on the ‘OPTIONS’
Page and press ENTER.
Clearing a Cluttered Map Display
After you’ve used the eTrex for a few trips, the map
display will become a bit messy from keeping track of
your movements. You can clean up the screen by clearing
the track log (the lines left on the Map Page):
To clear the track log:
1. Press the PAGE Button and switch to the ‘MENU’
Page.
2.
Press the UP or DOWN Button and highlight
‘TRACKS’.
3. Press ENTER. You are now on the ‘TRACK LOG’
Page. Use the UP Button and highlight ‘CLEAR’.
Press ENTER.
4. Use the DOWN Button and highlight ‘YES’. Press
ENTER.
Press the PAGE Button to select any
page.
You’ve now gone through the basic operation of the
eTrex and you’re ready to navigate! To turn the eTrex off,
press and hold the POWER Button.
Highlight STOP
NAVIGATION and press
ENTER on the Options
Page to stop a GOTO.
Getting Started
You’ve Made It!
Clear the Track Log
when the Map Page
gets too cluttered.
18
Introduction
This section covers the remaining features of the eTrex
that were not covered in the Getting Started section.
Map Page Options
In addition to the basic aspects of the Map Page that
were covered on page 11, there is a ‘MAP OPTIONS’
feature which allows you to customize the Map Page. The
following options are available:
• Orient Map Ahead/Northward: When ‘AHEAD’ is
selected, the top of the map is oriented in the direc-
tion you are currently moving. When ‘NORTHWARD’
is selected, the map is always oriented to the north.
• Auto Zoom On/Off: When ‘AUTO ZOOM’ is turned
on, the map automatically adjusts its scale to display
your entire navigating route. When it’s turned off, you
must press the UP or DOWN Buttons to select the
appropriate map scale.
• Show/Hide Waypoints: Allows you to view the map
with or without waypoints.
• Show Course Line/Bearing Line: ‘SHOW COURSE
LINE’ displays the path from your starting point to your
destination. ‘SHOW BEARING LINE’ displays the path
from your current location to your destination.
• Stop Navigation: ‘STOP NAVIGATION’ stops any
active navigation (navigation means there is a destina-
tion waypoint, page 16). This option cannot be selected
if there is no active navigation.
To select a Map Page option:
1. Press the ENTER Button on the ‘MAP’ Page.
2. The Map Options Menu appears. Press the UP or
DOWN Button and highlight the desired option and
press ENTER. Once you press ENTER, the change
is made and the Options Menu disappears.
Selecting ‘Orient Map
Ahead’ from the Map
Page options orients the
map to the direction you
are moving.
When you select ‘Orient
Map Northward’ the
fi gure icon is replaced
by a ‘direction’ triangle.
The tip of the triangle
tells you the general
direction you are
moving.
Reference
Map Page
Options
19
You will notice on the Map Page the little grey “man”.
The man stands still when you are not moving, he moves
when you move, and a blinking “?” means the eTrex has
lost satellite reception (weak signals). You should relocate
the eTrex or move to a place that has a clear view of the
sky.
Navigation Page Options
In addition to the Navigation Page basics that were
covered on page 12, the following Navigation Page
options are available:
• Reset Max Speed: this resets the Maximum Speed
achieved during a trip.
• Reset Trip: the trip time, trip distance (odometer) and
average speed are reset to zeros.
• Stop Navigation: stops any active navigation.
To select a Navigation Page option:
1. Press the ENTER Button on the ‘NAVIGATION’
Page.
2. The Options Menu appears. Press the UP or DOWN
Button, highlight the desired option, and press
ENTER. Once you press ENTER, the change is
made and the Options Menu disappears.
You can also change the fi elds at the bottom of the
Navigation Page to display different data:
Speed—like the speedometer in your car, ‘SPEED’ tells
you how fast you are going regardless of whether or not
you are on the right track.
Average Speed—the average speed traveled since last trip
reset.
Max Speed—
the maximum speed traveled since last reset.
Heading—the direction you are traveling.
The Navigation Page
allows you to display
eleven types of different
data, such as ‘Eleva-
tion’.
The eTrex will tell you
the time of sunrise
and sunset at your
current location.
Reference
Navigation Page
Options
20
Bearing—the compass direction from your location to a
destination.
Elevation—the measurement of height above mean sea
level.
Location—shows your current position coordinates.
Sunrise—the time of sunrise at your present location.
Sunset—the time of sunset at your present location.
Trip Time—the total time you have traveled since the
last trip reset.
Trip Odometer—like the odometer in your car, ‘TRIP
ODOMETER’ tells you how far you’ve gone since the last
trip reset.
To change a data fi eld:
1. On the ‘POINTER’ Page, press the UP or DOWN
Button and scroll through the available options,
stopping on the data you want the eTrex to display.
Main Menu Selections
The Main Menu turns the eTrex into a powerful
navigation tool. From the Main Menu you can custom-
ize the display, transfer information from a computer to
the eTrex and back again, and manage and organize all
of your waypoints. Now take a look at each of the Main
Menu selections.
Mark Waypoint Page
The ‘MARK WAYPOINT’ Page allows you to change
the waypoint symbol, name, elevation and location
(latitude and longitude). The information on page 14-15
explains how to change the waypoint symbol and name.
The ‘ MAIN MENU’
Page allows you to
customize the eTrex’s
features.
Reference
Main Menu
Selections
Remember that pressing
and holding the ENTER
Button displays your
location on the ‘MARK
WAYPOINT’ Page.
21
To change the location (position coordinates):
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘MARK’. Press ENTER. The ‘MARK WAYPOINT’
Page appears.
2. Press the UP or DOWN Button and highlight the
‘POSITION COORDINATES’ fi eld and press ENTER.
The ‘EDIT LOCATION’ Page appears.
3. Scroll through the position places using the UP and
DOWN Button (UP Button to move right to left,
DOWN Button to move left to right). When you
reach the position place you want to change, stop
and press ENTER. Using the UP or DOWN Button,
scroll through the choices and highlight the one
you want. Press ENTER. The position place is now
changed.
4. Press the UP or DOWN Button to highlight the ‘OK’
fi eld and press ENTER. The ‘MARK WAYPOINT’
Page appears.
5. Press the UP or DOWN Button to highlight the ‘OK’
fi eld and press ENTER. Your location with the new
position coordinates are now stored in memory.
To change the elevation:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘MARK’. Press ENTER. The ‘MARK WAYPOINT’
Page appears.
2. Press the UP or DOWN Button and highlight
the ‘ELEV’ fi eld and press ENTER. The ‘ENTER
CORRECT ELEVATION’ Page appears.
3. Use the UP or DOWN Button to highlight the
desired digit and press ENTER. A selection window
appears. Press the UP or DOWN Button to select
a new number and press ENTER. Repeat until all
numbers are changed.
4. Press the UP or DOWN Button to highlight the ‘OK’
fi eld and press ENTER. The ‘MARK WAYPOINT’
Page appears with the correct elevation displayed.
The ‘EDIT LOCATION’
Page displays on-screen
instructions on how
to edit the waypoint
location.
The ‘ENTER CORRECT
ELEVATION’ Page
allows you to change
the elevation for the
waypoint.
Reference
Mark Waypoint
Page
22
Waypoints Page
The Waypoints Page organizes all of your waypoints
in alphabetical order for easy selection. It also allows
you to select nine of the ‘NEAREST WAYPOINTS’ for a
separate list, and if you want, delete all waypoints.
To select a waypoint:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘WAYPOINTS’. Press ENTER. The ‘WAYPOINTS’
Page appears.
2. Press the UP or DOWN Button and highlight the
alphabetical tab containing the desired waypoint.
Press ENTER. Press the UP or DOWN Button to
select the desired waypoint. Press ENTER. The
‘REVIEW WAYPOINT’ Page appears.
To view the ’NEAREST’ waypoints page:
1. On the ‘WAYPOINTS’ Page, press the UP or DOWN
Button and highlight ‘NEAREST’. Press the ENTER
Button. The ‘NEAREST WAYPOINTS’ Page appears.
The nine closest waypoints within 250 miles appear
in a list showing their name and the distance from
your location. You can select a waypoint from this
list by pressing the UP or DOWN Button and select-
ing the desired waypoint. Once selected, press
ENTER. The ‘REVIEW WAYPOINT’ appears allowing
you to edit the waypoint if you desire.
To delete all waypoints:
1. On the ‘WAYPOINT’ Page, press the UP or DOWN
Button and highlight ‘DELETE ALL’. Press the
ENTER Button. A confi rmation message box
appears asking if you really want to delete all
waypoints. If you do, press the UP or DOWN
Button and highlight ‘YES’. Press ENTER.
If you change your mind and do not want to delete
the waypoint, press the UP or DOWN Button and
highlight ‘NO’. Press ENTER (or press the PAGE
Button). The confi rmation message box disappears
and all of the waypoints remain in memory.
The nine closest
waypoints appear in a
list showing their name
and the distance from
your location (four
shown here).
MAKE SURE you want
to delete all of the
waypoints before you
press ENTER!
Reference
Waypoints
Page
23
The ‘REVIEW
WAYPOINT’ Page
allows you to delete
a waypoint.
You can start a GOTO
from the ‘REVIEW
WAYPOINT’ Page.
Review Waypoint Page
The Review Waypoint Page allows you to change the
waypoint symbol, name, elevation and location (just like
on the Mark Waypoint Page). You can also delete the
waypoint, display the waypoint on the Map Page, and
start a GOTO.
To delete a waypoint:
1. On the ‘REVIEW WAYPOINT’ Page, press the UP
or DOWN Button and highlight ‘DELETE’. Press
the ENTER Button. A confi rmation message box
appears asking if you really want to delete the
waypoint. If you do, press the UP or DOWN
Button, highlight ‘YES’ and press ENTER.
If you change your mind and do not want to delete
the waypoint, press the UP or DOWN Button,
highlight ‘NO’ and press ENTER. The confi rmation
message box disappears and the waypoint remains
in memory (you can also press the PAGE Button
to exit).
To start a GOTO:
1. On the ‘REVIEW WAYPOINT’ Page, press the UP
or DOWN Button and highlight ‘GOTO’. Press the
ENTER Button. The ‘GOTO’ is activated with the
selected waypoint as the destination.
To view the selected waypoint on the Map
Page:
1. On the ‘REVIEW WAYPOINT’ Page, press the UP
or DOWN Button and highlight ‘MAP’. Press the
ENTER Button. The selected waypoint is displayed
on a map with bearing and distance. You can use
the UP or DOWN Buttons to zoom in and out on
the map. Press the PAGE Button and switch back to
the ‘WAYPOINTS’ Page.
Reference
Review
Waypoint Page
24
Using the Project feature can create a waypoint at a
specifi ed distance and bearing using a new or existing
waypoint as a reference. This works best when using a map
and compass to determine distance and bearing. You can
also change the name, symbol and elevation on this page.
Projecting a waypoint:
1. To project a waypoint from a waypoint on the
waypoint list (in order to insert a new waypoint
in a route, for example), select the route waypoint
from the list on the ‘WAYPOINTS’ Page and press
ENTER. The ‘REVIEW WAYPOINT’ Page displays.
To project a waypoint from your current location
(i.e., in order to travel to a location sighted in the
distance), press and hold the OK Button to mark
your location and save it as a waypoint. Then, select
it from the waypoints list, and press ENTER to
display the ‘REVIEW WAYPOINT’ Page.
2. Using the UP or DOWN Button, highlight the
‘PROJECT’ fi eld and press ENTER. The ‘PROJECT
WAYPOINT’ Page displays and a numeric name is
assigned to the new waypoint.
3. The distance fi eld is highlighted by default. Press
ENTER to display the ‘EDIT NUMBER’ Page.
4. On the ‘EDIT NUMBER’ Page, pressing the DOWN
Button moves the highlight to the next number
in the fi eld. With the desired digit selected, press
ENTER to activate the drop-down number list.
5. Using the UP or DOWN Button, select the correct
number and press ENTER. When all numbers are
entered correctly, highlight ‘OK’ and press ENTER.
6.
Using the DOWN Button, highlight the bearing fi eld
and press ENTER to display the ‘EDIT ANGLE’ Page.
7. On the ‘EDIT ANGLE’ Page, pressing the DOWN
Button moves the highlight to the next number
in the fi eld. With the desired digit selected, press
ENTER to activate the drop-down number list.
8. Using the UP or DOWN Button, select the correct
number and press ENTER. When all numbers are
entered correctly, highlight ‘OK’ and press ENTER.
9.
Highlight ‘GOTO’ and press ENTER to save the
waypoint and begin direct navigation to the point.
Reference
Review
Waypoint Page
The ‘PROJECT
WAYPOINT’ Page
The ‘EDIT NUMBER’
Page
25
Reference
Routes
The ‘ROUTE’ feature is
found on the ‘MENU’
Page.
You can use existing
waypoints to ‘build’ the
route.
‘Route’ and Route Page
The eTrex allows you to navigate using one of three
methods:
• GOTO
• Route
• TracBack
The GOTO method of navigation was briefl y
discussed on page 16.
The Route feature and the GOTO feature are
comparable in that they both guide you to destination
waypoints. However, the route feature is more power-
ful because it is more automatic. When you reach one
waypoint, the eTrex automatically guides you to the next
waypoint on the route without needing to touch any but-
tons. When you use the ‘GOTO’ feature you have to stop
and select the next waypoint before you start moving.
When you plan a trip, you can select waypoints from a
waypoint list and put them into the eTrex’s memory. At
least Two waypoints (up to a maximum of 50) are linked
together to form a route.
In the eTrex, a route is at least two waypoints that
describe the path you are going to travel. The Route
feature is very convenient because it allows the eTrex to
guide you from the fi rst waypoint in the route, to each
successive waypoint until you reach your fi nal destina-
tion.
When you start your trip, you activate the route
feature and the eTrex points the way you should travel to
get from the fi rst waypoint to the second. You can then
use the Navigation page to give you steering guidance.
TracBack, is discussed on page 28.
26
There are two ways to create a route:
1. Use existing waypoints that reside in the eTrex.
Choose ‘ROUTE’ on the ‘MENU’ Page, then add
a waypoint into the route from a list of available
waypoints.
2. Plan a ‘ROUTE’ in MapSource
®
on a PC, and use
“Save To Device” to download the ‘ROUTE’ to the
eTrex. See your Garmin dealer for more information
on using MapSource (MapSource is an optional
accessory, and is not included with the eTrex).
In either case, you can navigate to a destination using
‘ROUTE’ if a route has more than two waypoints. A single
waypoint route is only a normal waypoint, not a route.
The eTrex will not allow the ‘FOLLOW’ button to be
highlighted if there is only one waypoint in the route.
When you select the ‘FOLLOW’ button, a list with two
items is displayed letting you choose where to go. The list
will always show the FIRST (BEGINNING) and the LAST
(END) waypoint in the route. The eTrex will guide you to
the selected fi nal destination following each waypoint in
the route (the eTrex has one route).
To create a route from the waypoints list:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘ROUTE’. Press ENTER. The ‘ROUTE’ Page appears.
Press ENTER. The ‘ADD WAYPOINT TO ROUTE’
Page appears.
2. Press the UP or DOWN Button to select the
waypoint of your choice and press ENTER. The
waypoint you selected is placed in the fi rst fi eld on
the ‘ROUTE’ Page. Repeat this process until all of
the waypoints you want are entered into the route
list. Press PAGE to get back to the page of your
choice.
There are two ways to insert a waypoint into an exist-
ing route. One way is to insert the waypoint before an
existing waypoint in a route. The other way is to insert
the waypoint at the end of the waypoint list in a route.
You can insert a
waypoint before an
existing waypoint in the
list or at the end of the
waypoint list.
Press ‘FOLLOW’ to
activate a route.
Reference
Routes
27
Reference
Routes
To insert a waypoint into an existing route:
1. From the Route page, press the UP or DOWN
Button to select the entry point for the new way-
point. Stop at the waypoint on the route list that
you want to follow the new waypoint or use the
last open slot if you want the new point at the end
of the route. Press ENTER. The ‘ADD WAYPOINT TO
ROUTE’ Page appears.
2. Press the UP or DOWN Button to select the
waypoint of your choice and press ENTER. The
waypoint you selected is placed in the desired fi eld
on the ‘ROUTE’ Page.
To activate a route:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘ROUTE’. Press ENTER. The ‘ROUTE’ Page appears.
2. Press the UP or DOWN Button and highlight
‘FOLLOW’ and press ENTER. The choices are the
fi rst (beginning) waypoint and the last (end)
waypoint.
3. Press the UP or DOWN Button and select the
desired waypoint and press ENTER. The ‘Naviga-
tion’ Page appears giving you steering guidance to
the destination waypoint.
To remove a waypoint from the ‘ROUTE’ list:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘ROUTE’. Press ENTER. The ‘ROUTE’ Page appears.
Press the UP or DOWN Button and highlight
the waypoint you want to remove. The ‘INSERT/
REMOVE’ window appears. Press the UP or DOWN
Button and highlight ‘REMOVE’. Press ENTER.
To clear all route waypoints:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘ROUTE’. Press ENTER. The ‘ROUTE’ Page appears.
2. Highlight ‘CLEAR ALL’ and press ENTER. The con-
fi rmation window appears asking you if you really
want to clear all of the route waypoints. If you do,
select ‘YES’and press ENTER.
The eTrex draws an
electronic breadcrumb
trail as you travel.
The message ‘ARRIVING
DESTINATION’ is
displayed on every page
when you are 15 seconds
from reaching the
destination.
28
What is a Track Log?
The eTrex draws an electronic breadcrumb trail or
‘track log’ on the Map Page as you travel. The track log
starts recording as soon as the eTrex gets a location fi x. If
you want to keep a record of a certain track log before the
track memory is fi lled and it begins to overwrite the earli-
est tracks, you can save it to the ‘Saved Tracks’ list. You
can save a total of ten tracks in the eTrex. Saved tracks
can be used for navigation later. After a track log is saved,
the saved track will have a beginning (BEGIN) and ending
(END) point. This simply shows the “when/where” of the
starting and ending points of the saved track.
When you are ready to return to where you started,
the eTrex will take you back by following the track log
that you left behind. ‘TracBack’ allows you to return along
a traveled path without marking any waypoints. If you
want to keep a record of a certain track log or use the
‘TracBack’ feature, it is recommended that you clear the
track log before you start traveling. The percentage of
memory used by the current track log is displayed at
the top of the page. After the track log is ‘CLEARED’, it
will show zero percent. When the display shows 99%,
the most recent track points will start overwriting the
least recent track points. Thus, in order to avoid losing
any track points, you should save the track log before it
reaches 99% of memory usage.
Clearing the current track log:
1. With the ‘MENU’ Page displayed, press the UP and
DOWN Buttons to highlight ‘TRACKS’ and press
ENTER. The ‘TRACK LOG’ Page will appear.
2. Highlight the ‘CLEAR’ Button and press ENTER.
3. You will be asked ‘DO YOU REALLY WANT TO
CLEAR THE TRACK LOG?’. Use the DOWN Button to
highlight ‘YES’ and press ENTER to clear the current
track log.
Reference
Track Logs
You need to save the
track log fi rst before you
can use the TracBack
feature.
‘CLEAR’ the track log
before starting a new
trip.
29
Reference
Track Logs
To save a track for navigation later:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘TRACKS’. Press ENTER. The ‘TRACK LOG’ Page
appears.
2. Press the UP or DOWN Button and highlight ‘SAVE’
and press ENTER. The ‘SAVE BACK THROUGH’
window appears giving you a time frame for saving
a track or ‘ENTIRE LOG’. Press the UP or DOWN
Button and select the desired option. Press ENTER.
The saved track appears graphically on a sub page.
Press the UP or DOWN Button and select ‘OK’.
Press ENTER.
3. The track is now saved and appears in the ‘SAVED
TRACKS’ list on the ‘TRACK LOG’ Page.
NOTE: Saving a Track Log does not remove
those points from the active memory.
Renaming a saved track log:
1. With the ‘MENU’ Page displayed, highlight
‘TRACKS’ and press ENTER. The ‘TRACK LOG’ Page
will appear.
2. Place the highlight on a saved track and press
ENTER. The saved track will be displayed on a
map.
3. A default name will be displayed at the top of the
map. Using the UP or DOWN Button, highlight the
name and press ENTER. The ‘EDIT TRACK NAME’
Page will be displayed.
4. With the ‘EDIT TRACK NAME’ Page displayed,
pressing the DOWN Button will move the highlight
to the next place in the name fi eld. When the
desired place is selected, press ENTER to activate
the drop-down alphanumeric list.
5.
Using the UP or DOWN Button, select the correct
character and press ENTER. When the name
has
been entered correctly, highlight ‘OK’ and press
ENTER.
You can save a track
from a specifi c time or
save the entire track
log.
The ‘EDIT TRACK
NAME’ Page.
)
30
To delete all tracks:
1. On the ‘TRACK LOG’ Page, press the UP or DOWN
Button and highlight ‘DELETE ALL’. Press ENTER.
The verifi cation window appears.
2. If you really want to delete all saved tracks, press
the UP or DOWN Button and highlight ‘YES’. Press
ENTER. If you change your mind, press the UP or
DOWN Button and select ‘NO’. Press ENTER. The
tracks remain in memory (or press PAGE to exit).
To delete a saved track:
1. On the ‘TRACK LOG’ Page, press the UP or DOWN
Button and highlight the saved track that you
want to delete from the ‘SAVED TRACKS’ list. Press
ENTER. The saved track appears graphically.
2. Press the UP or DOWN Button and highlight
‘DELETE’. Press ENTER. A confi rmation window
appears asking you if you really want to delete
the saved track. If you do, press the UP or DOWN
Button and highlight ‘YES’. Press ENTER. If you
change your mind, press the UP or DOWN Button
and select ‘NO’. Press ENTER (or you can press
PAGE to exit). The tracks remain in memory.
To start TracBack Navigation:
1. On the ‘TRACK LOG’ Page, press the UP or DOWN
Button and highlight the saved track from the
‘SAVED TRACKS’ that you want to travel. Press
ENTER. The track graphically appears.
2. Press the UP or DOWN Button and highlight
‘TRACBACK’. Press ENTER. The direction window
appears asking you if you want the destination to
be at the beginning of the track or the end of the
track (see sidebar). Press the UP or DOWN Button
and select the desired destination point. The ‘NAVI-
GATION’ Page guides you to your destination.
You may not remember the original direction of the
saved track, but by using ‘BEGIN’ or ‘END’, you can
always select where you want to “TracBack to” without
remembering the directions of the saved track.
The ‘BEGIN’ point is
the point defi ning the
starting point when
saving a track log.
‘END’ is the last point
that was saved. Each
saved track will always
have a ‘BEGIN’ and
‘END’ point for
navigation. The
‘BEGIN-END’ pair
imply the direction of
the saved track. If you
want to retrace the
track, navigate to
‘END’. If you want
to track back to the
starting point, navigate
to ‘BEGIN’.
Reference
Track Logs
31
Setup Menu
The Setup Menu allows you to customize the eTrex.
From the Setup Menu you can change coordinate
systems, map datums, and distance units. You can also
change the time format, north reference, operating mode,
display contrast, and display back light timeout.
Time Page
The ‘Time’ Page allows you to select a 12 hour or 24
hour time format, enter the proper time zone, and choose
Daylight Savings Time. When you select 12 hour time
formatting, the clock will read like a standard clock with
12 hour AM and 12 hour PM cycles. The 24 hour option
sets the eTrex to display a 24 hour cycle (Military Time).
To change the time format:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight ‘TIME’
and press ENTER.
3. Press the UP or DOWN Button and select the ‘TIME
FORMAT’ fi eld and press ENTER.
4. Press the UP or DOWN Button, select 12 or 24
hours and press ENTER. Press PAGE to get back to
the page of your choice.
The ‘SETUP’ Menu
Reference
Setup Menu
Choose a 12 hour or 24
hour time setting.
32
Time Zone
The time zone can be set to any one of thirty
pre-programmed zones or by entering the UTC Time
Offset value in the UTC offset fi eld below the time zone
fi eld. When you select the 24 hour time format, the letters
‘lcl’ (local) appear next to the time. You can fi nd time
offset values for your longitude by following instructions
and the Time Offset Chart (Appendix D). To change the
time zone, follow the steps given on page 13.
UTC Offset
When you select ‘OTHER’ for the time zone, you can
access the UTC Offset fi eld and make a change to match
the time zone you selected. Other than that, you can’t
change it. (Refer to the UTC Offset Chart on page 44.)
Daylight Savings Time
Daylight savings time can be set to ‘Automatic’ (using
the built-in almanac to automatically change the clock
settings when daylight savings goes into or out of effect).
You can choose ‘Yes’ to manually add daylight savings or
‘No’ to remain on standard time.
To change the Daylight Savings Field:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight ‘TIME’
and press ENTER.
3. Press the UP or DOWN Button and select the
‘DAYLIGHT SAVINGS’ fi eld and press ENTER.
4. Press the UP or DOWN Button, select ‘AUTO’, ‘YES’,
or ‘NO’ and press ENTER. Press PAGE to get back
to the page of your choice.
NOTE: Daylight Savings time settings will not
affect the UTC offset number.
UTC stands for
‘Coordinated Universal
Time’ and replaced
Greenwich Mean Time
(GMT) as the World
standard for time in
1986. It is based on
atomic measurements
rather than the earth's
rotation.
Reference
Setup Menu
The Daylight Savings
time options.
)
33
Display Page
The Display Page allows you to set the display
backlight timeout (On all the time, 15 or 30 seconds, and
1 or 2 minutes) and the display contrast.
To change the Light Timeout:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight
‘DISPLAY’ and press ENTER. Press ENTER on the
‘LIGHT TIMEOUT’ fi eld.
3. Press the UP or DOWN Button and highlight your
selection and press ENTER. Press PAGE to get back
to the ‘SETUP’ page.
To adjust the display contrast:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. The ‘SETUP’ Page appears.
2. Press the UP or DOWN Button and highlight
‘DISPLAY’ and press ENTER. Press the UP or
DOWN Button and highlight the ‘CONTRAST’ slider
bar and press ENTER.
3. Press the UP or DOWN Button to move the slider
to adjust the contrast, then press ENTER. Press
PAGE to get back to the ‘SETUP’ page.
Units Page
Using your eTrex with a paper map increases the
navigation power of both. If you are going to use a map in
conjunction with the eTrex, you must select the position
format (grid), map datum, map units, and north reference
to match the map’s units. This is the purpose of the
Units Page. Regarding position format, the eTrex allows
you to choose from eighteen different grids. The eTrex
supports the UTM/UPS and latitude/longitude grids
because together they cover the world.
You can set the backlight
to stay On all the time,
but watch your battery
power!
The ‘UNITS’ Page
allows you match the
units of the eTrex to the
units of a unique paper
map you may be using.
Reference
Display and
Units Pages
34
Position Format
The default position coordinates format (and the one
most commonly used) for the eTrex is latitude and lon-
gitude in degrees and minutes (hdddº mm.mmm’). You
may also choose from 17 other position formats. There is
also a “User” position format which allows you to approx-
imate custom-designed grids. For more information on
grids and datums we recommend you visit the National
Imagery and Mapping Agency at http://www.nima.mil.
To change the Position Format (grid):
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. Use the UP or DOWN
Button to select ‘UNITS’. Press ENTER. The ‘UNITS’
Page appears.
2. Press the UP or DOWN Button and select the
‘POSITION FRMT’ fi eld. Press ENTER.
3. Press the UP or DOWN Button and select the
desired format. Press ENTER. Press PAGE to get
back to the page of your choice.
Map Datums
A map datum is a reference model of the earth’s shape.
Every map uses a map datum. The map datum is usually
listed in the title block of the map. If you are comparing
GPS coordinates to a paper map or other reference, the
map datum in the eTrex should match the horizontal map
datum used to generate the chart or other reference.
The default datum in the eTrex is WGS 84 (World
Geodetic Survey, 1984). You should only change the
datum if you are using maps or charts that specify a
different datum than WGS 84. If no datum is specifi ed,
you can select each datum applicable to your region until
you fi nd the datum that provides the best positioning at a
known point. You may also choose the “User” datum for
use with custom-designed grids.
Data Entry Pages exist for
the User Grid Format and
the User Datum Setup.
These pages allow you to
confi gure the eTrex for
compatibility with custom
designed grids. We
recommend surfi ng the net
for links to Garmin
user-grid and user datum
information. There are also
excellent navigation and
GPS articles available
on-line which will enhance
your overall knowledge of
GPS.
Eighteen position
formats are available
in the eTrex.
Reference
Map Datums
35
To change the Map Datum:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Press the UP or DOWN Button and highlight
‘SETUP’. Press ENTER. Use the UP or DOWN
Buttons to select ‘UNITS’. Press ENTER. The ‘UNITS’
Page appears.
2. Press the UP or DOWN Button and select the ‘MAP
DATUMS’ fi eld. Press ENTER.
3. Press the UP or DOWN Button to select the desired
datum. Press ENTER. Press PAGE to select the page
of your choice.
Units of Measure
The eTrex lets you select statute (the default setting),
nautical, or metric units of measure for all speed and
distance readouts.
To change the Units of Measure:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Use the UP and DOWN Button and highlight
the ‘SETUP’ fi eld. Press ENTER. The ‘SETUP’ Page
appears.
2. Press the UP or DOWN Button to select ‘UNITS’.
Press ENTER. The ‘UNITS’ Page appears.
3. Press the UP or DOWN Button and select the
‘UNITS’ fi eld. Press ENTER.
4. Press the UP or DOWN Button to select the desired
unit. Press ENTER. Press PAGE to select the page
of your choice.
You can select statute,
nautical, or metric units
of measurement from
the ‘UNITS’ page.
The ‘DEFAULTS’
setting will reset the
eTrex units to all of its
factory settings.
Reference
Units of
Measure
36
North Reference
‘Reference’ refers to the orientation of a map’s grid.
Map makers try to align the vertical lines on a map with
‘True North’. True North is the direction from any
location on the earth’s surface to the “north pole”. Maps
are typically referenced to true north. Because a compass
points to magnetic north, not true north, maps indicate
the difference between true and magnetic north with
something called ‘declination’. The amount of declination
changes as you move around the earth. Magnetic North
is the direction in which a compass needle points. The
eTrex bearings will correspond to a compass if the eTrex
is set to magnetic north. Due to errors introduced when
map makers fl atten the earth’s sphere onto paper, not all
of the grid lines drawn on the map point exactly to the
north pole, so the north indicated by the grid lines is
called ‘Grid North’. But, the difference is usually small
enough that ‘Grid’ north can be considered the same as
True North for travelling on land. If necessary, you can
correct for the difference between Grid North and True
North manually.
To change the North Reference:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Use the UP and DOWN Button and highlight
the ‘SETUP’ fi eld. Press ENTER. The ‘SETUP’ Page
appears.
2. Press the UP or DOWN Button to select ‘UNITS’.
Press ENTER. The ‘UNITS’ Page appears.
3. Press the UP or DOWN Button and select the
‘NORTH REF’ fi eld. Press ENTER.
4. Press the UP or DOWN Button to select the desired
reference. Press ENTER. Press PAGE to return to the
page of your choice.
When you select the ‘DEFAULTS’ fi eld and press
ENTER, the ‘UNITS’ page returns to the factory settings.
‘MAGNETIC’ north is
the default north
reference setting.
Reference
Units of
Measure
37
Interface Page
The Interface Page allows you to connect and use
devices such as computers and differential GPS (DGPS)
beacon receivers with the eTrex.
Input/Output Settings
The ‘Interface’ Settings Page allows you to use your
eTrex with external NMEA devices, DGPS beacon receiv-
ers, a personal computer, etc. You can choose from seven
different input/output serial data formats, or none at all.
Below is a description of each format:
• Garmin - the proprietary format used to exchange way-
point, route, and track data with a PC.
• Garmin DGPS - allows DGPS input using a Garmin
beacon receiver and a standard RTCM SC-104 format
and DGPS tuning.
• NMEA OUT - supports the output of standard NMEA
0183 version 3.0 data.
• TEXT OUT - allows simple ASCII text output of
location and velocity information, without any input
capabilities.
• RTCM IN - allows DGPS input using a standard RTCM
SC-104 format without any output capabilities.
• RTCM/NMEA- allows DGPS input using a standard
RTCM SC-104 format and supports the output of
standard NMEA 0183 version 3.0 data.
• RTCM/TEXT- allows DGPS input using a standard
RTCM SC-104 format and simple ASCII text output of
location and velocity information.
• NONE - provides no interfacing capabilities.
The interface options
will allow you to use
a PC to download
waypoints, routes,
and track logs.
NMEA
stands for
“National Marine
Electronics Association”
and
RTCM
stands for
“Radio Technical
Commission for Maritime
Services”. Both are
involved in developing
technical standards for
the marine electronics
industry.
NOTE: Use the ‘RTCM IN’ setting if your
beacon receiver is self-tuning.
Reference
Interface Page
)
38
If ‘Garmin DGPS’ or ‘RTCM/NMEA’ format is selected,
additional fi elds are provided to control a Garmin
differential beacon receiver (e.g. GBR 21) directly from
your eTrex. You can enter the beacon frequency and bit
rate when you select ‘User’ from the Beacon pop-up list
to manually tune the receiver (you can also ‘scan’ if you
don’t know what the nearby station is, but the unit could
continue scanning if reception is temporarily lost).
To select an I/O Format:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Use the UP and DOWN Button and highlight
the ‘SETUP’ fi eld. Press ENTER. The ‘SETUP’ Page
appears.
2. Press the UP or DOWN Button and select the
‘INTERFACE’ fi eld. Press ENTER. The ‘INTERFACE’
Page appears.
3. Press ENTER on the ‘I/O FORMAT’ fi eld. Press the
UP or DOWN Button to select the desired format.
Press ENTER. Press PAGE to return to the page of
your choice.
System Page
The System Page shows you the eTrex’s current
software version and allows you to choose from three
modes of operation:
• Normal
• Battery Save
• Demo (Demonstration)
Normal Mode
The GPS receiver is turned on all the time when it’s in
‘NORMAL’ mode. The normal mode is more sensitive to
sudden turns or change of speed/acceleration.
The ‘SYSTEM’ Page
shows you the software
version, allowing you to
update from Garmin’s
web site.
A ‘BATTERY LOW’
message appears at the
bottom of every page
when there are
approximately ten
minutes of battery life
left (when using alkaline
batteries).
Reference
System Page
39
Battery Save
When the eTrex is in ‘BATTERY SAVE’ mode, the GPS
receiver is turned on and off alternatively to conserve
power.
To select battery save mode:
1. Press the PAGE Button and switch to the ‘MENU’
Page. Use the UP and DOWN Button and highlight
the ‘SETUP’ fi eld. Press ENTER. The ‘SETUP’ Page
appears.
2. Press the UP or DOWN Button and select the
‘SYSTEM’ fi eld. Press ENTER. The ‘SYSTEM’ Page
appears.
3. Press ENTER on the ‘MODE’ fi eld. Press the UP
or DOWN Button to select ‘BATTERY SAVE’. Press
ENTER. Press PAGE to return to the page of your
choice.
Demo Mode
The ‘DEMO’ mode is designed for dealers to show
the features and functions of the eTrex to potential
customers inside a closed building where satellite
reception is not possible. There is no navigation possible
in ‘DEMO’ mode.
If you select the ‘DEMO’ mode, a window appears
at the bottom of the screen asking you to verify that you
want to turn the GPS off (the unit’s GPS receiver will turn
off and stop tracking satellites, but the unit itself will not
power off). To do so, press ENTER.
Congratulations! You now know all there is to know about
the Garmin eTrex.
The ‘DEMO’ mode is
designed for Garmin
dealers.
Reference
Battery Save
The eTrex’s batteries will
last up to 22 hours in
‘BATTERY SAVE’ mode
(when using alkaline
batteries).
Demo Mode
40
Physical
Case: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7
standards (waterproof to 1 meter for 30 minutes)
Size: 4.4”H x 2”W x 1.2”D
Weight: Approx. 5.3 ounces (150g) w/batteries
Temperature Range: 5° to 158°F (-15° to 70°C)
3
(operating)
Performance
Receiver: Differential-ready, 12 parallel channel
Acquisition time: Approx. 15 seconds (warm start)
Approx. 45 seconds (cold start)
Approx. 5 minutes (First Time/AutoLocate™)
Update Rate: 1/second, continuous
Position Accuracy: 1-5 meters (3-15 ft) with DGPS corrections
1
15 meters (49 ft) RMS
2
Velocity Accuracy: 0.1 knot RMS steady state
Dynamics: Performs to specifi cations to 6 g’s
Interfaces: NMEA 0183 (versions 2.00-2.30), RTCM 104 (for DGPS cor-
rections) and RS-232 for PC interface
Antenna: Built-In
Power
Input: Two 1.5-volt AA batteries
3
Battery Life: Up to 22 hours in Battery Save mode (with alkaline batteries)
4
Specifi cations subject to change without notice.
1
With optional Garmin Differential Beacon Receiver Input (such as Garmin GBR 21).
2
Subject to accuracy degradation to 100m 2DRMS under the U.S. DOD-imposed Selective Availability
program.
3
The temperature rating for the eTrex may exceed the usable range of some batteries. Alkaline bat
teries can rupture at high temperatures. External power can only be applied using the Garmin Auto
Power Adapter or PC Interface Cable with Auto Power Adapter (This cable contains a voltage regula
tor). Modifi cations or other applications will void the product warranty.
4
Alkaline batteries lose a signifi cant amount of their capacity as temperature decreases. Use lithium
batteries when operating the eTrex in below-freezing conditions. Extensive use of screen backlighting
will signifi cantly reduce battery life.
Appendices
Appendix A
Specifi cations
41
GPS - the Global Positioning System - is a
navigation revolution. It’s a technology that pinpoints a
user’s location anywhere in the world, 24 hours a day,
regardless of the weather.
Designed by the United States’ Department of Defense
for use by the military, the GPS System was made
available to civilians for use in aviation, marine surveying
and general outdoor/recreation markets. Today, millions
of people utilize the accuracy and convenience of this
amazing technology to hunt, fi sh, hike, fl y, cruise and sail.
GPS consists of a constellation of 24 satellites orbiting
some 12,000 miles above the earth.
These satellites transmit signals containing time and
orbital data to calculate satellite position and almanac
data. Meanwhile, receivers used on the ground, sea and
air search the sky for the satellites. The GPS unit needs
to acquire good signals from at least three satellites to
determine a position on the surface of the earth. A fourth
signal is required to get three-dimensional positioning
which determines elevation or altitude.
Appendices
Appendix B
What is GPS?
42
Satellite Reception Tips
The basic steps in getting the eTrex ‘ready to navigate’
was covered on page 9. If the eTrex has problems with
receiving satellite signals, you will be prompted to answer
some questions. Please follow the steps that best describes
your situation:
A. You are trying to use the eTrex indoors:
1. The message ‘TROUBLE TRACKING SATELLITES. ARE
YOU INDOORS NOW?’ will appear. Press the UP or
DOWN Button to highlight ‘YES’. Press ENTER. The
message will disappear.
OR:
2. Go outside. The eTrex will keep tracking.
B. You are not indoors and you have not
moved hundreds of miles/km since you
last used your eTrex:
1. The message ‘TROUBLE TRACKING SATELLITES. ARE
YOU INDOORS NOW?’ will appear. Press the UP or
DOWN Button to highlight ‘NO’. Press ENTER.
2. eTrex then asks: ‘HAVE YOU MOVED HUNDREDS
OF MILES/KM SINCE LAST USE?’ Press the UP or
DOWN Button to highlight ‘NO’. Press ENTER.
3. eTrex asks: ‘IS TODAY dd-mmm-yy?’ If you answer
‘YES’ (the date matches the current date) the eTrex
will continue tracking satellites and switch to the
Satellite Page.
4. If you answer NO (the date is incorrect), the eTrex
will do an ‘AUTOLOCATE’ and switch to the satellite
page.
An ‘AUTOLOCATE’ forces the eTrex
to search for any available satellite(s) to
determine its (your) location.
Clouds and weather do
not affect the operation
of the eTrex!
Appendices
Appendix C
Reception Tips
43
C. You are not indoors, but you have moved
hundreds of miles/km since you last used
your eTrex:
1. The message ‘TROUBLE TRACKING SATELLITES. ARE
YOU INDOORS NOW?’ will appear. Press the UP or
DOWN Button to highlight ‘NO’. Press ENTER.
2. eTrex then asks: ‘HAVE YOU MOVED HUNDREDS
OF MILES/KM SINCE LAST USE?’ Press the UP or
DOWN Button to highlight ‘YES’. Press ENTER.
3
. eTrex will do an ‘AUTOLOCATE’ and switch to
the Satellite Page. This option is useful if you’ve
relocated a distance greater than 500 miles from
the last location the eTrex was used.
The eTrex has a 12 parallel
channel receiver for fast,
accurate position fi xes, even
under heavy foliage and tree
canopy.
Appendices
Appendix C
Reception Tips
44
The table below gives approximate UTC time offset
for various longitudinal zones. If you are in daylight
savings time, add one hour to the offset.
tesffOenoZlanidutigno
L
1+°5.220Eot°5.700
E
2+°5.730Eot°5.220
E
3+°5.250Eot°5.730
E
4+°5.760Eot°5.250
E
5+°5.280Eot°5.760
E
6+°5.790Eot°5.280
E
7+°5.211Eot°5.790
E
8+°5.721Eot°5.211
E
9+°5.241Eot°5.721
E
01+°5.751Eot°5.241
E
11+°5.271Eot°5.751
E
21+°0.081Eot°5.271
E
A simple way to determine your local time offset is how many hours you are behind
or ahead of UTC (also called ‘Greenwich’ or ‘zulu’ time) Example: EST (Eastern Standard
Time) is 5 hours behind UTC, so your offset would be -5. Adding one hour for daylight
savings would make EDT (Eastern Daylight Time) -4. Subtract an hour for each time
zone as you travel west.
Offsets for Continental U.S. would be:
EST: -5 EDT: -4
CST: -6 CDT: -5
MST: -7 MDT: -6
PST: -8 PDT: -7
Appendices
Appendix D
Time Offset
tesffOenoZlanidutignoL
21-º5.271Wotº0.081W
11-º5.751Wotº5.271W
01-º5.241Wotº5.751W
9-º5.721Wotº5.241W
8-º5.211Wotº5.721W
7-º5.790Wotº5.211W
6-º5.280Wotº5.790W
5-º5.760Wotº5.280W
4-º5.250Wotº5.760W
3-º5.730Wotº5.250W
2-º5.220Wotº5.730W
1-º5.700Wotº5.220W
0-°5.700Eot°5.700W
45
Interface formats are selected from the ‘SETUP’ Page.
The input/output lines on your eTrex are RS-232 compat-
ible, allowing easy interface to a wide range of external
devices, including PC’s, differential beacon receivers,
marine autopilots and/or a second GPS receiver.
The NMEA 0183 version 2.0 interface format is
supported by the eTrex and enables the unit to drive up
to three NMEA devices.
NMEA 0183 Version 3.0 Approved Sentences:
GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC,
GPRTE, GPVTG, GPWPL, GPBOD
Garmin Proprietary Sentences:
PGRME (estimated error), PGRMM (datum string),
PGRMZ (altitude), PSLIB (beacon receiver control)
DGPS (Differential GPS) corrections are accepted
in RTCM SC-104 version 2.0 format through the ‘Data
In’ line. The Garmin GBR 21 and GBR 23 is the recom-
mended beacon receiver for use with the eTrex. Other
beacon receivers with the correct RTCM format may be
used, but may not correctly display status or allow tuning
control from the GPS unit.
The eTrex may be hard-wired to a serial connec-
tor using the Data Cable (see the Garmin web site
www.garmin.com for ordering information). Refer to
the wiring diagram and the eTrex unit data connection
illustrated below.
The optional PC Interface Cable allows you to connect
your eTrex to a PC-compatible computer’s serial port.
eTrex
Connector
Data
Cable
Ground (-)
Data Out
Data In
Power (+)
Ground
Data Out
Data In
White
Green
Black
Appendices
Appendix E
Wiring Diagram
46
The eTrex does not turn on:
1. Check to see if the batteries are installed correctly
and that the battery terminals are clean.
It takes more than 10 minutes to get a
location fi x:
1. There may be large obstacles overhead; move to a
new location with a clear view of the sky.
2. See “Satellite Reception Tips” on page 42.
The arrow on the Navigation Page does not
point to the destination:
1. Navigation information is based on your movement.
If you are standing still, the information is not
updating.
Since the eTrex is not a magnetic compass it cannot
show you which way you are facing while you are
standing still.
The eTrex coordinates do not match the loca-
tion on your map:
1. Check to make sure the eTrex is confi gured to use
the same position format and datum as your map.
See page 34.
NOTE: The Auto Power Adapter converts
12 VDC to 3 VDC output for the eTrex. This
adapter is not interchangeable with auto
power adapters designed for the Garmin VHF
720 and 725, GPS 170, 175, 190 and 195.
Appendices
Appendix F
Troubleshooting
)
47
Can I use the eTrex indoors?
No. The DEMO mode is available, but we suggest that
only dealers use it.
Do I need to subscribe to a service to use the
eTrex?
No. The GPS satellites are owned by the United States
Department of Defense (DoD) and have been funded by
U.S. taxpayers’ dollars.
Reception of GPS satellite signals is free to everyone.
Does the eTrex work anywhere in the world and
in any weather?
Yes.
How accurate is a Garmin GPS?
The eTrex is accurate to within 15 meters without the
DoD-imposed Selective Availability (S/A). Using differ-
ential techniques, the eTrex can be as accurate as 1-5
meters. The eTrex is accurate to within 100 meters under
S/A.
Another factor that will effect the accuracy of the GPS
receiver is the geometry of the satellites in view of the
GPS receiver. A poor geometry situation can provide less
accurate position readings, and this especially applies
to GPS altitude measurements. The altitude reading on
the GPS unit can vary by +/- 450 ft. depending on the
level of degradation being imposed under S/A. It is not
uncommon to see the altitude continuously drift up and
down when S/A is being imposed.
Why can’t I see the display in the daylight?
Adjust the contrast (see page 9).
Why can’t I interface my computer with the
eTrex?
Make sure that you have the correct INPUT/OUTPUT
format selected on your eTrex.
Appendices
Appendix G
FAQs
48
What Grid Formats does the eTrex Support?
hddd.ddddd
o
(degrees, decimal degrees)
hddd
o
mm.mm (degrees, minutes, decimal minutes)
hddd
o
mm’ss.s (degrees, minutes, seconds, decimal
seconds)
British Grid
Dutch Grid
Finnish KKJ27 Grid
German Grid
Irish Grid
Maidenhead
MGRS (Military Grid Reference System)
New Zealand
Qatar Grid
Swedish Grid
Swiss Grid
Taiwan Grid
User Defi ned Grid
UTM/UPS (Universal Transfer Mercator/Universal Polar
Stereographic)
W Malaysian R
Can I turn off the Track Log?
No. You can clear the track log, but it is always activated.
What does the message "NO DGPS POSITION"
mean?
eTrex had a differential fi x and lost it.
Appendices
Appendix G
FAQs
49
A
Accessories 8
Auto Zoom 18
Average Speed 19
B
Backlighting and Contrast 9
Batteries 8, 39
Battery Save Mode 39
Beacon Receiver 37, 40
Bearing 20
Bearing Line 18
Buttons 6
C
Cancelling a GOTO 17
Clear a Route Waypoint 27
Compass 12
Course Line 18
D
Data Entry 34
Daylight Savings Time 32
Delete a Waypoint 23
Delete All Waypoints 22
Demo Mode 39
Description 7
DGPS 37, 45, 48
Display Page 33
E
Edit Waypoints 14-15, 20-21
Elevation 20, 21
F
FCC Compliance Statement 4
Features 5
Frequently Asked Questions 47-48
G
Getting Started 9-17
GOTO 16, 17, 23
GPS 41
GPS Accuracy 47
Grid Formats 47-48
H
Heading 19
Appendices
Appendix H
Index
50
I
I/O Formats 37-38
Interface Page 37
Installing the Batteries 8
L
Latitude/Longitude 14, 21
Location 20
Low Battery 38
M
Main Menu 13
Map Datum 33, 34, 35
Map Display 17
Map Orientation 18
Map Page 11, 18
Map Scale 11
MapSource CD 8, 36
Maps 33
Marine Autopilot 45
Mark a Waypoint 14
Mark Waypoint Page 20-21
Max Speed 19
Menu Page Basics 13
Military Time 31
N
Navigation 10, 12, 14
Navigation Page 12, 16, 19-20
Nearest Waypoints Page 22
NMEA 37, 45
North Reference 36
P
Page Basics 10-13
Position Format 34
Projecting a Waypoint 24
R
Ready to Navigate 10
Registration 1
Review Waypoint Page 23-24
Routes 25-27
RTCM 37
Appendices
Appendix H
Index
51
S
Satellite Page 9, 10
Satellite Reception 10, 42-43
Setup Menu 31-39
Signal Strength Bar 10
Software Version 38
Specifi cations 40
Speed 19
Stop Navigation 18, 19
System Page 38-39
T
Time Format 31
Time Offset Chart 44
Time Zones 13, 44
Tracback Navigation 30-31
Track Logs 17, 28-30, 48
Trip Odometer 20
Troubleshooting 46
U
Units of Measure 35
Units Page 33-36
User Grid Format 34
UTC 32
W
Warnings and Cautions 3
Warranty 52
Waypoints Page 22
Waypoint Symbol 14
Web Site 1
Welcome Page 9
Wiring Diagram 45
Appendices
Appendix H
Index
52
Warranty
Limited
Warranty
This Garmin product is warranted to be free from defects in materials or workmanship for
one year from the date of purchase. Within this period, Garmin will at its sole option, repair
or replace any components that fail in normal use. Such repairs or replacement will be made
at no charge to the customer for parts or labor, provided that the customer shall be respon-
sible for any transportation cost. This warranty does not cover failures due to abuse, misuse,
accident or unauthorized alteration or repairs.
THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN
LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING
ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.
IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL,
INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE,
MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PROD-
UCT. Some states do not allow the exclusion of incidental or consequential damages, so the
above limitations may not apply to you.
Garmin retains the exclusive right to repair or replace the unit or software or offer a full
refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE
AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.
To obtain warranty service, contact your local Garmin authorized dealer. Or call Garmin
Customer Service at one of the numbers shown below, for shipping instructions and an RMA
tracking number. The unit should be securely packed with the tracking number clearly
written on the outside of the package. The unit should then be sent, freight charges prepaid,
to any Garmin warranty service station. A copy of the original sales receipt is required as the
proof of purchase for warranty repairs.
Products sold through online auctions are not eligible for rebates or other special offers
from Garmin. Online auction confirmations are not accepted for warranty verification. To
obtain warranty service, an original or copy of the sales receipt from the original retailer is
required. Garmin will not replace missing components from any package purchased through
an online auction.
Garmin International, Inc. Garmin (Europe) Ltd.
1200 East 151st Street Unit 4, The Quadrangle, Abbey Park Industrial Estate
Olathe, Kansas 66062, U.S.A. Romsey, SO51 9DL, U.K.
Phone: 913/397.8200 Phone: 44/0870.8501241
Basic eTrexCover.indd 3 2/19/2003, 1:09:52 PM
© 2000-2003 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151
st
Street, Olathe, Kansas 66062, U.S.A.
Garmin (Europe) Ltd.
Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.
Garmin (Asia) Corporation
No. 68, Jangshu 2
nd
Road., Shijr, Taipei County, Taiwan
www.garmin.com
Part Number 190-00205-00 Rev. C
For the latest free software updates throughout the life of your
Garmin product, visit the Garmin web site at: www.garmin.com.
Basic eTrexCover.indd 4 2/19/2003, 1:09:52 PM
… 48 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin eTrex bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin eTrex in de taal/talen: Engels als bijlage per email.

De handleiding is 0,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Garmin eTrex

Garmin eTrex Gebruiksaanwijzing - Français - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info