661253
17
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
1
Install your ELM327 compatible OBD-II device in the OBD-II
port of your vehicle.
TIP: See the owner's manual for your vehicle and your OBD-
II device for information about locating the OBD-II port and
installing the OBD-II device.
2
If necessary, enable pairing mode on your OBD-II device.
TIP: See the owner's manual for your OBD-II device to
enable pairing mode.
3
From the VIRB camera main menu, select Wireless >
Bluetooth > Status to turn on Bluetooth wireless technology.
4
Select Add New.
5
Select the OBD-II device to pair.
TIP: If your OBD-II device does not appear in the list, confirm
that it is still in pairing mode and search again.
After the OBD-II device is paired, the device status changes
to Connected.
Removing Paired Bluetooth Devices
1
From the main menu, select Wireless > Bluetooth.
2
Select a wireless device.
3
Select Forget > .
VIRB Edit
The VIRB Edit application provides easy access to these tools
and services for your device.
Review and edit recorded videos
Apply image stabilization to recorded videos
Add G-Metrix gauges, graphs, and more
Add titles and transitions
Edit videos from multiple cameras
Update software and features
Additional editing, sharing, and playback features
The VIRB Edit application is available for Windows
®
and Mac
®
computers. Go to garmin.com/VIRBEdit for more information.
Customizing the Device
Setup Menu
NOTICE
Select > Setup.
Stitch Distance: Sets the focal distance used to stitch 360-
degree video (Changing the Stitching Distance, page 4).
Voice Control: Allows you to control your camera using spoken
commands (Voice Control, page 5).
Record Light: Turns the recording LED on or off. This can be
useful to eliminate ambient light from the LED when
recording in darker environments.
Tones: Turns the camera tones on or off. When this setting is
enabled, tones play to indicate various camera actions and
statuses, such as capturing a photo, starting recording, or
connecting to a device.
Self Timer: Sets the length of the default self timer used when
you take a photo.
Microphone: Allows you to change the microphone mode or
turn the microphones off (Microphone Modes, page 5).
System: Allows you to change system settings, such as
language, units, region, and GPS.
SD Card: Allows you to view detailed information about the
installed memory card or format the memory card.
About: Displays important software information, your unit ID,
and regulatory and compliance information.
Formatting Your Memory Card
NOTICE
Erased data cannot be restored.
You can format the memory card installed in your camera to
erase all photos, videos, and other data. You may also need to
format the memory card the first time you use it in your camera.
From the main menu, select Setup > SD Card > Format
Card > .
System Settings
From the main menu, select Setup > System.
GPS: Enables the camera to determine your location, speed,
and elevation using GPS satellite signals. When this setting
is enabled, the camera includes GPS information in the G-
Metrix data when you record a video or photo.
NOTE: Your camera records GPS position data at all times
when the GPS setting is enabled. This data is not collected
by Garmin.
Language: Sets the on-screen text language.
Units: Sets the system for units of measure to metric or statute.
Auto-Off: Turns off the camera automatically after it has not
been used for five minutes.
External Power: Sets the camera behavior when it is connected
to external power. You can select the Charge Mode option to
enter charging mode automatically or the Power On option to
turn the camera on. While in charging mode, the screen and
all other features turn off (Charging the Battery, page 1).
Factory Reset: Restores all settings to the factory default
values.
Device Information
Status LEDs
The LEDs on the front of the camera indicate the camera status.
LED
Color
LED Action Status
Green Flashing The camera is turned on, but it is not
recording.
Green Solid The camera is connected to a
computer in USB mass storage
mode.
Off Off (while not
connected to
external power)
The camera is turned off.
Off Off (while connected
to external power)
The camera is turned off, and the
battery is fully charged.
Red Solid (top LED only) The battery is charging.
Red Flashing The camera is recording video.
Yellow
and red
One or more yellow
flashes, followed by
a long red flash
The camera has captured one or
more photos. The LED flashes yellow
while the self-timer is counting down
and red when the photo is captured.
Green or
red
Flashing rapidly The camera will turn off or stop
recording soon. This could be
because the battery is below a 10%
charge level, the memory card has
less than 10 minutes of recording
time remaining, or the internal
temperature is too high.
Blue Flashing
intermittently
The WiFi radio is turned on.
VIRB Edit 13
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Virb 360 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Virb 360 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Garmin Virb 360

Garmin Virb 360 Gebruiksaanwijzing - Nederlands - 24 pagina's

Garmin Virb 360 Gebruiksaanwijzing - Deutsch - 24 pagina's

Garmin Virb 360 Gebruiksaanwijzing - Français - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info