691433
51
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
1
From an applicable gauges screen, select Menu > Set
Gauge Limits.
2
Select a gauge to customize.
3
Select an option:
To set the minimum value of the standard operating
range, select Rated Min..
To set the maximum value of the standard operating
range, select Rated Max..
To set the lower limit of the gauge lower than the rated
minimum, select Scale Min..
To set the upper limit of the gauge higher than the rated
maximum, select Scale Max..
4
Select the limit value.
5
Repeat steps 4 and 5 to set additional gauge limits.
Configuring the Tank Level Sensors
NOTICE
You must connect fuel sensors to inputs 1, 2, 3, or 4.
1
Select Settings > My Vessel > Seven Marine Installation >
Tank Preset.
2
Select a tank level sensor to configure.
3
Select Name, enter a name, and select Done.
4
Select Type, and select the type of sensor.
5
Select Style, and select the style of sensor.
6
Select Tank Capacity, enter the capacity of the tank, and
select Done.
7
Select Calibration, and follow the on-screen instructions to
calibrate the tank levels.
If you do not calibrate the tank levels, the system uses
default settings for the tank levels.
Setting the Fuel Alarm
You can set an alarm to sound when the total amount of
remaining onboard fuel reaches the level you specify.
1
Select Settings > Alarms > Fuel.
2
If necessary, select a driveline.
3
Select On.
4
Enter the remaining amount of fuel that triggers the alarm.
5
If necessary, repeat steps 2–4 for all drivelines.
Viewing Graphs
Before you can view graphs of various environmental changes,
such as temperature, depth, and wind, you must have an
appropriate transducer or sensor connected to the network.
1
Select Info > Graphs.
2
Select a graph.
Setting the Graph Range and Time Scales
You can indicate the amount of time and the range of depth that
appear in the depth and water temperature graphs.
1
From a graph, select Graph Setup.
2
Select an option:
To set a time-elapsed scale, select Duration. The default
setting is 10 minutes. Increasing the time-elapsed scale
allows you to view variations over a longer period of time.
Decreasing the time-elapsed scale allows you to view
more detail over a shorter period of time.
To set the graph scale, select Scale. Increasing the scale
allows you to view more variation in readings. Decreasing
the scale allows you to view more detail in the variation.
Adjusting the Active Trim
Active trim controls the amount of pitch and roll of your boat.
Pitch is the forward and backward motion of your boat on its
center axis, relative to the surface of the water. Roll is the
side-to-side motion of your boat on its center axis. You can
adjust the active trim to limit the amount of degrees your pitch
and roll are from your desired trim levels.
1
Select A/V, Gauges, Controls > Active Trim.
2
Select an option:
To adjust the forward and backward motion, select Active
Pitch.
To adjust the side-to-side motion, select Active Roll.
Adjusting the Active Trim Sensitivity
You can adjust the active trim sensitivity to limit the amount of
degrees your pitch and roll are from your desired trim levels.
1
Select A/V, Gauges, Controls > Active Trim > Menu >
Active Sensitivity.
2
Adjust the level of sensitivity.
Viewing Graphs
Before you can view graphs of various environmental changes,
such as temperature, depth, and wind, you must have an
appropriate transducer or sensor connected to the network.
Select Info > Trip & Graphs > Graphs.
Setting the Graph Range and Time Scales
You can indicate the amount of time and the range of depth that
appear in the depth and water temperature graphs.
1
From a graph, select Graph Setup.
2
Select an option:
To set a time-elapsed scale, select Duration. The default
setting is 10 minutes. Increasing the time-elapsed scale
allows you to view variations over a longer period of time.
Decreasing the time-elapsed scale allows you to view
more detail over a shorter period of time.
To set the graph scale, select Scale. Increasing the scale
allows you to view more variation in readings. Decreasing
the scale allows you to view more detail in the variation.
Vessel Information
When the chartplotter is connected to a compatible EVC 2.0
Volvo Penta engine, you can view information about the engine.
Select Info > Vessel Info.
Maintenance Assistant
When the chartplotter is connected to a compatible Volvo Penta
engine, you can view the time to the next engine service, in
engine hours remaining and days remaining.
Select Info > Vessel Info > Maintenance Assistant.
After you have serviced the engine, select the engine, and
select Reset Service Reminder.
Oil Level Information
When the chartplotter is connected to a compatible Volvo Penta
engine and an engine oil level sensor or a transmission oil level
sensor, you can view information about the engine oil level and
transmission oil level.
Vessel Information 43
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 Gebruiksaanwijzing - Nederlands - 82 pagina's

Garmin VOLVO PENTA GLASS COCKPIT GPSMAP 7600 Gebruiksaanwijzing - Deutsch - 86 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info