Handleiding Garmin Striker Plus 9 (pagina 14 van 20) (Engels)

691437

Verklein

Vergroot

Pagina terug

1/20

Pagina verder

A magenta line appears. In the center of the magenta line is

a thinner purple line that represents the corrected course

from your present location to the destination. The corrected

course is dynamic, and it moves with your boat when you are

off course.

Review the course indicated by the magenta line.

Follow the magenta line along each leg in the route, steering

to avoid land, shallow water, and other obstacles.

If you are off course, follow the purple line (corrected course)

to go to your destination, or steer back to the magenta line

(direct course).

Deleting a Saved Route

Select User Data > Routes.

Select a route.

Select Delete.

Deleting All Saved Routes

Select User Data > Manage Data > Clear User Data >

Routes.

Tracks

A track is a recording of the path of your boat. The track

currently being recorded is called the active track, and it can be

saved. You can show tracks in each chart or 3D chart view.

Showing Tracks

Select User Data > Tracks > Tracks.

A trailing line on the chart indicates your track.

Clearing the Active Track

Select User Data > Tracks > Clear Active Track.

The track memory is cleared, and the active track continues

to be recorded.

Saving the Active Track

The track currently being recorded is called the active track.

Select User Data > Tracks > Save Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Viewing a List of Saved Tracks

Select User Data > Tracks > Saved Tracks.

Editing a Saved Track

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track.

Select an option:

• Select Name, and enter the new name.

• Select Track Color, and select a color.

Saving a Track as a Route

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Edit Track > Save As > Save as Route.

Browsing for and Navigating a Recorded Track

Before you can browse a list of tracks and navigate to them, you

must record and save at least one track (Saving the Active

Track, page 10).

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Follow Track.

Select an option:

• To navigate the track from the starting point used when

the track was created, select Forward.

• To navigate the track from the destination point used

when the track was created, select Backward.

Review the course indicated by the colored line.

Follow the line along each leg in the route, steering to avoid

land, shallow water, and other obstacles.

Deleting a Saved Track

Select User Data > Tracks > Saved Tracks.

Select a track.

Select Delete.

Deleting All Saved Tracks

Select User Data > Manage Data > Clear User Data >

Saved Tracks.

Retracing the Active Track

The track currently being recorded is called the active track.

Select User Data > Tracks > Follow Active Track.

Select an option:

• Select the time the active track began.

• Select Entire Log.

Review the course indicated by the colored line.

Follow the colored line, steering to avoid land, shallow water,

and other obstacles.

Setting the Color of the Active Track

Select User Data > Tracks > Active Track Options > Track

Color.

Select a track color.

Managing the Track Log Memory During Recording

Select User Data > Tracks > Active Track Options.

Select Record Mode.

Select an option:

• To record a track log until the track memory is full, select

Fill.

• To continuously record a track log, replacing the oldest

track data with new data, select Wrap.

Configuring the Recording Interval of the Track Log

You can indicate the frequency at which the track plot is

recorded. Recording more frequent plots is more accurate but

fills the track log faster. The resolution interval is recommended

for the most efficient use of memory.

Select User Data > Tracks > Active Track Options >

Record Intervals > Interval.

Select an option:

• To record the track based on a distance between points,

select Distance > Change, and enter the distance.

• To record the track based on a time interval, select Time >

Change, and enter the time interval.

• To record the track plot based on a variance from your

course, select Resolution > Change, and enter the

maximum error allowed from the true course before

recording a track point.

Device Configuration

System Settings

Select Settings > System.

Display: Adjusts the backlight brightness (Adjusting the

Backlight, page 2) and color scheme (Adjusting the Color

Mode, page 2).

10 Device Configuration

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin Striker Plus 9 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Garmin Striker Plus 9

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info