Handleiding Garmin Quatix (pagina 13 van 22) (Engels)

522252

Verklein

Vergroot

Pagina terug

1/22

Pagina verder

Select an option:

• Select Set Course to navigate to the distant object.

• Select Project (page 3).

Navigate using the compass (page 2) or map (page 5).

Calculating the Size of an Area

Before you can calculate the size of an area, you must acquire

satellites (page 2).

Select the blue key.

Select GPS Tools > Area Calc..

Walk around the perimeter of the area you want to calculate.

When you are finished, select the blue key to calculate the

area.

Select an option:

• Select Save Track, enter a name, and select Done.

• Select Change Units to convert the area to a different

unit.

• Select to exit without saving.

Viewing the Almanacs

You can view almanac information for the sun and moon, and

hunting and fishing.

Select the blue key.

Select an option:

• To view the sunrise, sunset, moonrise, and moonset

information, select GPS Tools > Sun & Moon.

• To view the predicted best times for hunting and fishing,

select GPS Tools > Hunt & Fish.

If necessary, select or to view a different day.

Viewing Satellite Information

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

Select the blue key.

Select Start GPS.

Select the blue key.

Select GPS Tools > Satellite.

Select to view additional information.

Simulating a Location

When you are planning routes or activities in a different area,

you can turn off GPS and simulate a different location.

Select the blue key.

Select Setup > System > GPS Mode > Demo Mode.

Select a location.

Select Go > Move to Location.

ANT+™ Sensors

The device is compatible with these optional, wireless ANT+

accessories.

• tempe™ wireless temperature sensor (page 10)

• Heart rate monitor

For information about compatibility and purchasing additional

sensors, go to http://buy.garmin.com.

Pairing ANT+ Sensors

Pairing is the connecting of ANT+ wireless devices, for

example, connecting a tempe temperature sensor with your

Garmin device.

Bring the device within range (3 m) of the sensor.

NOTE: Stay 10 m away from other ANT+ sensors while

pairing.

Select the blue key.

Select Setup > ANT Sensor.

Select your sensor.

Select New Search.

When the sensor is paired with your device, the sensor

status changes from Searching to Connected. Sensor data

appears in the data page loop or a custom data field.

Tips for Pairing ANT+ Accessories with Your Garmin

Device

• Verify that the ANT+ accessory is compatible with your

Garmin device.

• Before you pair the ANT+ accessory with your Garmin

device, move 10 m (32.9 ft.) away from other ANT+

accessories.

• Bring the Garmin device within range 3 m (10 ft.) of the

ANT+ accessory.

• After you pair the first time, your Garmin device automatically

recognizes the ANT+ accessory each time it is activated.

This process occurs automatically when you turn on the

Garmin device and only takes a few seconds when the

accessories are activated and functioning correctly.

• When paired, your Garmin device receives data from only

your accessory, and you can go near other accessories.

Streaming NMEA 2000 Data

While tracking or navigating, your device can stream data from

a NMEA 2000 network equipped with a Garmin GNT.

Select the blue key.

Select Setup > ANT Sensor > GNT > On.

The data pages display information from the sensors

connected to the NMEA 2000 network. You can customize

the data fields that appear on each data page.

Select twice.

Select Stream N2K to begin streaming NMEA 2000 data.

To stop streaming NMEA 2000 data, select the blue key, and

select Stop N2K.

Using Automatic Man Overboard

If your device is connected to a Garmin GNT, you can set the

device to automatically trigger the preset man overboard

function if the device loses contact with a GNT for more than 10

seconds.

Select the blue key.

Select Auto MOB > On.

When the device loses contact with a GNT for more than 10

seconds, the man overboard function is activated on the

device and on all Garmin chartplotters connected to the

NMEA 2000 network. A man overboard waypoint is created

on the chartplotter and on the device.

Select an option:

• To acknowledge the man overboard activation and save

the MOB waypoint, select Confirm.

• To dismiss the man overboard activation in the case of

accidental triggering, select Clear.

• To dismiss the man overboard activation and turn off the

automatic man overboard function, select Disable.

ANT+™ Sensors 9

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin Quatix Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Garmin Quatix

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info