740421
24
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
Notifications: Shows or hides smartphone notifications.
Forget Phone: Removes the connected device from the list of
paired devices. This option is available only after a device is
paired.
WiFi Settings
Select Setup > Wi-Fi.
Wi-Fi: Enables wireless technology.
Add Network: Allows you to scan for and connect to a wireless
network.
Routing Settings
The available routing settings vary based on whether Direct
Routing is enabled or disabled.
Select Setup > Routing.
Direct Routing: Enables or disables direct routing. Direct
routing calculates the most direct route possible to the
destination.
Activity: Sets an activity while routing. The device calculates
routes optimized for the type of activity you are doing.
Calculation Method: Sets the method used to calculate your
route.
Lock On Road: Locks the blue triangle, which represents your
position on the map, onto the nearest road. This is most
useful when driving or navigating on roads.
Off Route Recalculation: Sets recalculation preferences when
navigating away from an active route.
Avoidance Setup: Sets the types of roads, terrain, and
transportation methods to avoid while navigating.
Route Transitions: Sets how the device routes from one point
on the route to the next. This setting is available only for
some activities. The Distance option routes you to the next
point on the route when you are within a specified distance of
your current point.
Turning On Expedition Mode
You can use expedition mode to prolong the battery life. In
expedition mode, the screen shuts off, the device enters low
power mode, and the device collects fewer GPS track points.
1
Select Setup > Expedition Mode.
2
Select an option:
To enable the device to prompt you to turn on expedition
mode when you turn off the device, select Prompted.
To automatically turn on expedition mode after two
minutes of inactivity, select Auto.
To never turn on expedition mode, select Never.
In expedition mode, the green LED flashes occasionally.
Setting the Device Tones
You can customize tones for messages, turn warnings, and
alarms.
1
Select Setup > Tones > Tones > On.
2
Select a tone for each audible type.
Camera Settings
Select Setup > Camera.
Photo Resolution: Sets the resolution of the photos.
Save Photos To: Sets the photo storage location.
Camera Instructions: Displays brief instructions about taking
photos.
Geocaching Settings
Select Setup > Geocaching.
Geocaching Live: Allows you to remove live geocache data
from your device and remove your device registration from
geocaching.com (Removing Live Geocache Data from the
Device, page 17, Removing Your Device Registration From
Geocaching.com, page 17).
Geocache Style: Sets the device to display the geocache list
using names or codes.
chirp Searching: Allows the device to search for a geocache
containing a chirp accessory (Enabling chirp Searching,
page 17).
Program chirp: Programs the chirp accessory.
Filter Setup: Allows you to create and save custom filters for
geocaches (Saving a Custom Geocache Filter, page 16).
Found Geocaches: Allows you to edit the number of geocaches
found. This number automatically increases when you log a
find (Logging the Attempt, page 16).
Wireless Sensors
Your device can be used with wireless ANT+ or Bluetooth
sensors. For more information about compatibility and
purchasing optional sensors, go to buy.garmin.com.
Sensors Settings
Select Setup > Sensors.
Fitness: Allows you to pair fitness accessories, including a heart
rate monitor or speed and cadence sensors.
Tempe Sensor: Allows you to pair a tempe
temperature
sensor.
XERO: Allows you to enable or disable your sharing status and
make sharing public or private.
NOTE: You can share your location from a compatible Xero
device.
DogTrack: Allows you to receive data from a compatible
handheld dog tracking device (Dog Tracking, page 15).
inReach Remote: Allows you to enable or disable the inReach
remote function and device verification for your Montana
700i/750i device.
NOTE: You can pair a compatible Garmin device and use it
to remotely send messages from your Montana 700i/750i
device.
Pairing Your Wireless Sensors
Before you can pair, you must put on the heart rate monitor or
install the sensor.
Pairing is the connecting of wireless sensors using ANT+ or
Bluetooth technology, for example, connecting a heart rate
monitor with your device.
1
Bring the device within 3 m (10 ft.) of the sensor.
NOTE: Stay 10 m (33 ft.) away from other sensors while
pairing.
2
Select Setup > Sensors.
3
Select your sensor type.
4
Select Search For New.
When the sensor is paired with your device, the sensor status
changes from Searching to Connected.
Fitness Settings
Select Setup > Fitness.
Auto Lap: Sets the device to automatically mark the lap at a
specific distance.
User: Sets your user profile information. The device uses this
information to calculate accurate training data in Garmin
Connect.
HR Zones: Sets the five heart rate zones and your maximum
heart rate for fitness activities.
Marking Laps by Distance
You can use Auto Lap
®
to automatically mark the lap at a
specific distance. This feature is helpful for comparing your
performance over different parts of an activity.
20 Customizing the Device
24

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Garmin-Montana-750i

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin Montana 750i bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin Montana 750i in de taal/talen: Engels als bijlage per email.

De handleiding is 2,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Garmin Montana 750i

Garmin Montana 750i Gebruiksaanwijzing - Nederlands - 36 pagina's

Garmin Montana 750i Gebruiksaanwijzing - Deutsch - 38 pagina's

Garmin Montana 750i Gebruiksaanwijzing - Français - 38 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info