Handleiding Garmin Montana 700 serie (pagina 13 van 34) (Engels)

740418

Verklein

Vergroot

Pagina terug

1/34

Pagina verder

Turns appear in the text bar along the top of the map. Audible

tones signal turns in the route.

Optional Maps

You can use additional maps with the device, such as BirdsEye

satellite imagery, City Navigator, and Garmin HuntView

™

Plus

detailed maps. Detailed maps may contain additional points of

interest, such as restaurants or marine services. For more

information, go to buy.garmin.com or contact your Garmin

dealer.

Enabling Maps

You can enable map products installed on your device.

From the map, select > Map Setup > Configure Maps.

Select the toggle switch to enable each installed map.

Finding a Location Near Another Location

Select > > Search Near.

Select an option.

Select a location.

Waypoints

Waypoints are locations you record and store in the device.

Waypoints can mark where you are, where you are going, or

where you have been.

Creating a Waypoint

You can save your current location as a waypoint.

Select Mark Waypoint.

If necessary, select a field to edit the waypoint.

Select Save.

Navigating to a Waypoint

Select > Waypoints.

Select a waypoint.

Select Go.

By default, your route to the waypoint appears as a straight,

colored line on the map.

Finding a Waypoint

Select Waypoint Manager.

Select a waypoint from the list.

If necessary, select to narrow the search.

Select an option:

• Select Spell Search to search using the name of the

waypoint.

• Select Select Symbol to search using the symbol of the

waypoint.

• Select Search Near to search near a recently found

location, another waypoint, your current location, or a

point on the map.

• Select Sort to view the list of waypoints based on nearest

distance or alphabetical order.

Editing a Waypoint

Select Waypoint Manager.

Select a waypoint.

Select an item to edit, such as the name.

Enter the new information, and select .

Deleting a Waypoint

Select Waypoint Manager > > Delete.

Select an option:

• To delete one waypoint, select a waypoint.

• To delete multiple waypoints, select multiple waypoints.

• To delete all waypoints, select Select All.

Select Delete.

Increasing the Accuracy of a Waypoint Location

You can refine the accuracy of a waypoint location by averaging

the location data. When averaging, the device takes several

GPS readings at the same location and uses the average value

to provide more accuracy.

Select Waypoint Manager.

Select a waypoint.

Select > Average Location.

Move to the waypoint location.

Select Start.

Follow the on-screen instructions.

When the confidence status bar reaches 100%, select Save.

For best results, collect four to eight samples for the waypoint,

waiting at least 90 minutes between samples.

Projecting a Waypoint

You can save a new waypoint by projecting the distance and

bearing from a saved waypoint to a new location.

For example, if you would like to navigate to a location you

observe on the other side of a river or stream, you can project a

waypoint from your current location to the observed location,

then navigate to the new location after crossing the river or

stream at a more suitable location.

Select Waypoint Manager.

Select a waypoint.

Select > Project Waypoint.

Enter the bearing, and select .

Select a unit of measure.

Enter the distance, and select .

Select Save.

Moving a Waypoint on the Map

Select Waypoint Manager.

Select a waypoint.

Select > Move Waypoint.

Select a location on the map.

Select Move.

Finding a Location Near a Waypoint

Select Waypoint Manager.

Select a waypoint.

Select > Find Near Here.

Select a category.

The list displays locations near the selected waypoint.

Setting a Waypoint Proximity Alarm

You can add a proximity alarm for a waypoint. Proximity alarms

alert you when you are within a specified range of a particular

location.

Select Waypoint Manager.

Select a waypoint.

Select > Set Proximity.

Enter the radius.

When you enter an area with a proximity alarm, the device

sounds a tone.

Adding a Waypoint to a Route

Select Waypoint Manager.

Select a waypoint.

Select > Add to Route.

Select a route.

Navigation 9

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin Montana 700 serie Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Garmin Montana 700 serie

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info