474722
8
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
GPSMAP
®
62 series
owners manual
For use with the GPSMAP 62,
62s and, 62st
All rights reserved. Except as expressly provided
herein, no part of this manual may be reproduced,
copied, transmitted, disseminated, downloaded
or stored in any storage medium, for any purpose
without the express prior written consent of Garmin.
Garmin hereby grants permission to download a
single copy of this manual onto a hard drive or
other electronic storage medium to be viewed and
to print one copy of this manual or of any revision
hereto, provided that such electronic or printed copy
of this manual must contain the complete text of
this copyright notice and provided further that any
unauthorized commercial distribution of this manual
or any revision hereto is strictly prohibited.
Information in this document is subject to change
without notice. Garmin reserves the right to change
or improve its products and to make changes in the
content without obligation to notify any person or
organization of such changes or improvements. Visit
the Garmin Web site (www.garmin.com) for current
updates and supplemental information concerning
the use and operation of this and other Garmin
products.
Garmin
®
, BlueChart
®
, g2 Vision
®
, City Navigator
®
,
and GPSMAP
®
are trademarks of Garmin Ltd. or
its subsidiaries, registered in the USA and other
countries. HomePort
, BaseCamp
, ANT
, and
ANT+
are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used
without the express permission of Garmin.
Windows
®
is a registered trademark of Microsoft
Corporation in the United States and/or other
countries. Mac
®
is a registered trademarks of Apple
Computer, Inc. microSD
is a trademark of SanDisk
or its subsidiaries. Other trademarks and trade
names are those of their respective owners.
© 2010 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062,
USA
Tel. (913) 397.8200 or
(800) 800.1020
Fax (913) 397.8282
Garmin (Europe) Ltd.
Liberty House,
Hounsdown Business Park,
Southampton, Hampshire, SO40 9LR UK
Tel. +44 (0) 870.8501241 (outside the UK)
0808 2380000 (within the UK)
Fax +44 (0) 870.8501251
Garmin Corporation
No. 68, Jangshu 2nd Road,
Sijhih, Taipei County,
Taiwan
Tel. 886/2.2642.9199
Fax 886/2.2642.9099
Table of Contents
Getting Started .................... 1
Manual Conventions .................. 1
Device Overview........................ 2
Battery Information .................... 2
Installing the Batteries ............... 3
Turning the Device On or Off ..... 3
Acquiring Satellite Signals ......... 3
Buttons ...................................... 4
Navigating with Waypoints
and Routes .......................... 5
Waypoints .................................. 5
Routes ....................................... 6
Additional Maps ......................... 8
Tracks .................................. 9
About Tracks.............................. 9
Navigating a Saved Track........ 10
Using the Main Pages .......11
Customizing the Data Fields.....11
Restoring Default Page
Settings ..................................11
Map...........................................11
Compass ................................. 13
Using the Compass ................. 14
Using Sight ‘N Go .................... 14
Elevation Plot........................... 15
Opening the Main Menu .......... 16
Trip Computer .......................... 17
Main Menu Features and
Settings ............................. 18
Geocaches .............................. 18
Share Wirelessly...................... 18
Proximity Alarms ...................... 19
Prole Change ......................... 19
Area Calculation ...................... 19
Satellite .................................... 20
Additional Main Menu Tools ..... 20
Customizing Your
Device ................................ 22
Customizing Data Fields.......... 22
Data Field Options ................... 22
System Settings....................... 26
Display Settings ....................... 27
Setting Up Tones ..................... 27
Marine Settings........................ 27
Setting up Marine Alarms ........ 28
Resetting Data ......................... 29
Changing the Page
Sequence .............................. 29
Customizing the Unit
Settings ................................. 30
Time Settings ........................... 30
Position Format Settings ......... 30
Altimeter Settings .................... 31
Geocache Settings .................. 32
Routing Settings ...................... 32
Fitness ..................................... 33
Proles..................................... 33
Appendix ........................... 34
Registering Your Device .......... 34
Updating the Software ............. 34
Viewing Important Device
Information ............................ 34
Contacting Garmin Product
Support ................................. 34
Using the Backlight .................. 35
Specications .......................... 35
Maximizing Battery Life ........... 36
About the Batteries .................. 37
Buying Optional Accessories ... 38
Using Optional Fitness
Accessories ........................... 38
Data Management ................... 39
Attaching the Wrist Strap ......... 42
Attaching the Carabiner Clip.... 43
Caring for the Device ............... 43
Troubleshooting ....................... 44
Index .................................. 46
GPSMAP 62 Series Owners Manual 1
Getting Started
Getting Started
WARNING
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information
When using your device the rst time,
you should complete the following
tasks to set up the device and get to
know the basic features.
1. Install the batteries (page 3).
2. Turn on the device (page 3).
3. Acquire satellites (page 3).
4. Mark a waypoint (page 5).
5. Navigate a route (page 7).
6. Record a track (page 9).
7. Calibrate the compass (page 13).
Manual Conventions
When you are instructed to press
something, use the buttons on the unit.
Use the Rocker to select something in
a list, and then press ENTER (page 4).
The small arrows (>) used in the text
indicate that you should select a series
of items in order, for example, “Select
Delete > Yes.”
2 GPSMAP 62 Series Owner’s Manual
Getting Started
Device Overview
1
2
3
4
5
7
6
8
1
Internal antenna
2
Display
3
Buttons (page 4)
4
5
mini-USB port
(under weather cap)
6
MCX connector for GPS
antenna (under weather cap).
Available only on the GPSMAP
62s and the GPSMAP 62st.
7
microSD
card slot (under
batteries). Available only on the
GPSMAP 62s and the GPSMAP
62st.
8
Battery compartment
Battery Information
The device operates on two AA
batteries. Use alkaline, NiMH, or
lithium batteries. Use precharged
GPSMAP 62 Series Owners Manual 3
Getting Started
NiMH or lithium batteries for best
results (page 37).
Installing the Batteries
1. Remove the battery cover by
turning the D-ring 1/4 turn counter-
clockwise and pulling up.
2. Insert the batteries, observing
polarity.
3. Replace the battery cover.
For best results, after you install new
batteries, update the battery type in the
system settings (page 37).
Turning the Device On or
Off
Press and hold .
Setting Your Language
1. Turn on the unit.
2. Use the Rocker to select a
language.
Acquiring Satellite
Signals
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. If necessary, turn on the device.
3. Wait while the device searches for
satellites.
A question mark ashes while the
device determines your location.
4. Quickly press to open the
backlight status page.
The GPS bars indicate satellite
4 GPSMAP 62 Series Owner’s Manual
Getting Started
strength. When the bars are green, the
device has acquired satellite signals.
Buttons
FIND Press FIND to open the
search menu.
MARK Press MARK to save
your current location as a
waypoint.
QUIT Press QUIT to cancel
or return to the previous
menu or page.
ENTER Press ENTER to select
options and acknowledge
messages.
MENU Press MENU to open
the options menu for the
page that is currently
open.
Press MENU twice to
open the main menu
(from any page).
PAGE Press PAGE to scroll
through the main pages
(page 11).
Rocker Press up, down, right,
and left to select menu
options and to move the
map cursor.
IN Press IN to zoom in on
the map.
OUT Press OUT to zoom out
on the map.
GPSMAP 62 Series Owners Manual 5
Navigating with Waypoints and Routes
Navigating with
Waypoints and Routes
Waypoints
Waypoints are locations you record and
store in the device.
Creating Waypoints
1. From any page, press MARK.
2. Select Done.
Navigating to a Waypoint Using
the Search Menu
You can use the search menu to quickly
nd waypoints, tracks, routes, and
coordinates that you have saved.
1. From any page, press FIND.
2. Select Waypoints.
3. Select a waypoint.
4. Select Go.
Editing a Waypoint
Before you can edit a waypoint, you
must create a waypoint.
1. From the main menu, select
Waypoint Manager.
2. Select a waypoint.
3. Select an attribute (such as the
name or location).
4. Enter the new information.
5. Select Done.
Deleting a Waypoint
1. From the main menu, select
Waypoint Manager.
2. Select a waypoint.
3. Press MENU.
4. Select Delete.
6 GPSMAP 62 Series Owner’s Manual
Navigating with Waypoints and Routes
Routes
A route is a sequence of waypoints
that leads you to your nal destination.
Your device can store up to 50 routes
with up to 250 points each.
Creating a Route
1. From the main menu, select Route
Planner > Create Route > Select
First Point.
2. Select a category.
3. Select the rst point in the route.
4. Select Use.
5. Select Select Next Point.
6. Repeat steps 2–5 until the route is
complete.
A route must contain at least two
points.
7. Press QUIT to save the route.
Editing the Name of a Route
1. From the main menu, select Route
Planner.
2. Select a route.
3. Select Change Name.
4. Enter the new name.
5. Select Done.
Editing a Route
1. From the main menu, select Route
Planner.
2. Select a route.
3. Select Edit Route.
4. Select a point.
5. Select an option:
Review—shows the point on
the map.
Move Down (or Up)—changes
the order of the point on the
route.
GPSMAP 62 Series Owners Manual 7
Navigating with Waypoints and Routes
Insert—adds an additional
point on the route.
The additional point is inserted
before the point you are editing.
Remove—removes the point
from the route.
Viewing a Route on the Map
1. From the main menu, select Route
Planner.
2. Select a route.
3. Select View Map.
Deleting a Route
1. From the main menu, select Route
Planner.
2. Select a route.
3. Select Delete Route.
Navigating a Route
1. Press FIND.
2. Select Routes.
3. Select a route.
4. Select Go.
Viewing the Active Route
1. From the main menu, select Active
Route.
2. Select a point in the route to view
additional details.
Stopping Navigation of a Route
1. From any page, press FIND.
2. Select Stop Navigation.
Navigating a Reverse Route
1. From the main menu, select Route
Planner.
2. Select a route.
3. Select Reverse Route.
4. Select the route again.
5. Select View Map > Go.
8 GPSMAP 62 Series Owner’s Manual
Navigating with Waypoints and Routes
Additional Maps
To purchase preloaded detailed map
data cards, go to http://buy.garmin.com
or contact your Garmin dealer.
Finding an Address with City
Navigator
®
You can use optional City Navigator
maps to search for addresses, cities,
and other locations. The detailed maps
contain millions of points of interest,
such as restaurants, hotels, and auto
services.
1. Press FIND.
2. Select Addresses.
3. Enter the country.
4. Enter the city or postal code.
NOTE: Not all map data provides
postal code searching.
5. Select the city.
6. Enter the house number.
7. Enter the street.
8. Select
Go.
GPSMAP 62 Series Owners Manual 9
Tracks
Tracks
About Tracks
Your Garmin device records a track log
while you are moving. You can save
these tracks and navigate to them later.
You can view archived or loaded tracks
by selecting Track Manager from the
main menu.
Managing Track Log Recording
1. From the main menu, select Setup
> Tracks > Track Log.
2. Select Record, Do Not Show or
Record, Show On Map.
If you select Record, Show On
Map, a line on the map indicates
your track.
3. Select Record Method.
4. Select an option:
Distance—records tracks at a
specied distance.
Time–records tracks at a
specied time.
Auto—records tracks at a
variable rate to create an
optimum representation of your
tracks.
5. Select Recording Interval.
6. Select an option to record tracks
more or less often.
NOTE: Using the Most Often
interval provides the most track
detail and lls up the device
memory quicker.
10 GPSMAP 62 Series Owners Manual
Tracks
Viewing the Current Track
The track being recorded is called the
current track.
1. From the main menu, select Track
Manager > Current Track.
2. Select an option:
View Map—shows the current
track on the map.
Elevation Plot—shows the
elevation plot (page 15) for the
current track.
Saving the Current Track
1. From the main menu, select Track
Manager > Current Track.
2. Select what you want to save:
Save Track—saves the entire
active track.
Save Portion—allows you to
select a portion of the current
track to save.
Clearing the Current Track
From the main menu, select Setup
> Reset > Clear Current Track >
Yes.
Deleting a Track
1. From the main menu, select Track
Manager.
2. Select a track.
3. Select Delete > Yes.
Navigating a Saved Track
You must record and save a track
before you can navigate using it.
1. Press FIND.
2. Select Tracks.
3. Select a saved track.
4. Select Go.
GPSMAP 62 Series Owners Manual 11
Using the Main Pages
Using the Main Pages
The information needed to operate this
device is found on the following pages:
map, compass, main menu, and trip
computer.
Customizing the Data
Fields
You can customize the data elds that
appear on the main pages. For data
eld descriptions, see page 22.
1. From a main page, press MENU.
2. Select Change Data Fields.
3. Select a data eld.
4. Follow the on-screen instructions.
Restoring Default Page
Settings
1. From a main page, press MENU.
2. Select Restore Defaults.
3. Press ENTER.
Map
The position icon represents your
location on the map. As you travel,
the position icon moves and leaves a
track log (trail). Waypoint names and
symbols also appear on the map.
Changing the Map Orientation
1. From the map, press MENU.
2. Select Setup Map > Orientation.
3. Select an orientation:
Select North Up to show north
at the top of the page.
Select Track Up to show your
current direction of travel at the
top of the page.
Select Automotive Mode to
show a perspective view.
12 GPSMAP 62 Series Owners Manual
Using the Main Pages
Measuring Distance
You can move the cursor around the
map to measure distance from the
current location.
1. From the map, press MENU.
2. Select Measure Distance.
The device automatically begins
measuring from your current
location.
3. Move the cursor to a point you
want to measure to.
The distance appears at the bottom
of the page.
4. Press QUIT to stop measuring.
Map Setup Options
From the map, press MENU, and
select Setup Map.
Map Orientation—allows you to
select how the map is displayed
(page 11).
Guidance Text—allows you to
select when to show guidance text
on the map.
Advanced Map Setup
Auto Zoom—automatically
selects the appropriate zoom
level for optimal use on your
map. When Off is selected, you
must zoom in or out manually.
Zoom Levels—map items
draw or appear at or below the
selected zoom level.
Text Size—allows you to select
the text size for map items.
Detail—allows you to select the
amount of map data displayed
on the device.
NOTE: Higher detail settings
may cause the map to redraw
slowly.
Shaded Relief—shows detail relief
on the map (if available) or turns
off shading.
GPSMAP 62 Series Owners Manual 13
Using the Main Pages
Map Information—allows you to
enable or disable the maps currently
loaded on the device. To purchase
additional maps, see page 38.
Compass
When navigating to a destination,
the bearing pointer points to your
destination, regardless of the direction
you are moving. When the bearing
pointer points toward the top of the
electronic compass, you are traveling
directly toward your destination. If
it points any other direction, turn
toward that direction until the arrow is
pointing toward the top of the compass.
Calibrating the Compass
notice
Calibrate the electronic compass
outdoors. Do not stand near objects that
inuence magnetic elds, such as cars,
buildings, or overhead power lines.
NOTE: The three-axis compass is
available only with the GPSMAP 62s
and GPSMAP 62st.
You should calibrate the compass after
moving long distances, experiencing
temperature changes, or changing the
batteries.
1. From the compass, press MENU.
2. Select Calibrate Compass > Start.
3. Follow the on-screen instructions.
14 GPSMAP 62 Series Owners Manual
Using the Main Pages
Using the Compass
You can use the compass to navigate an
active route.
1. Press PAGE.
2. Hold the device level.
3. Follow the bearing pointer to
your destination.
Using Sight ‘N Go
NOTE: Sight ‘N Go is available only
with the GPSMAP 62s and GPSMAP
62st.
You can point the device at an object in
the distance, such as a lighthouse, lock
in the direction, and then navigate to
the object.
1. From the main menu, select Sight
‘N Go.
2. Point the device at an object.
3. Select Lock Direction > Set
Course.
4. Use the compass to navigate to the
object.
Compass Setup Options
From the compass, press MENU, and
select Setup Heading.
Display—shows the type of
directional heading on the compass:
Directional Letters—sets the
compass reading to directional
letters (N, S, E, W).
Numeric Degrees—sets the
compass reading to degrees
(0°–359°).
Mils—sets the compass reading
to mils (0 mils–6399 mils).
North Reference—sets the north
reference of the compass:
True—sets true north as the
heading reference.
Magnetic—automatically sets
the magnetic declination for
your location.
GPSMAP 62 Series Owners Manual 15
Using the Main Pages
Grid—sets grid north as the
heading reference (0°).
User—sets the magnetic
variation value.
Go To Line/Pointer—allows
you to select how the course is
displayed.
Bearing (Small/Large) indicates
the direction to your destination.
Course indicates your
relationship to a course line
leading to a destination.
Compass—allows you to switch
from an electronic compass to
a GPS compass when you are
traveling at a higher rate of speed
for a set period of time, or turns the
compass off.
Calibrate Compass—starts the
compass calibration (page 13).
Elevation Plot
NOTE: The elevation plot page is
available only with the GPSMAP 62s
and GPSMAP 62st.
Calibrating the Barometric
Altimeter
You can manually calibrate the
barometric altimeter if you know
the correct elevation or the correct
pressure.
1. From the elevation plot, press
MENU.
2. Select Calibrate Altimeter.
3. Follow the on-screen instructions.
16 GPSMAP 62 Series Owners Manual
Using the Main Pages
Elevation Plot Setup Options
From the elevation plot, press MENU.
Change Plot Type—sets the type
of data shown on the elevation plot:
Elevation/Time—records
elevation changes over a period
of time.
Elevation/Distance—records
elevation changes over a
distance.
Barometric Pressure—records
barometric pressure over a
period of time.
Ambient Pressure—records
ambient pressure changes over a
period of time.
Adjust Zoom Ranges—adjusts
the zoom ranges shown on the
elevation plot page.
Reset—resets the elevation plot
data:
Reset Trip Data—resets all
trip data.
Delete All Waypoints—deletes
all saved waypoints.
Clear Current Track—deletes
the track log.
Restore Defaults—restores the
device to factory settings.
Calibrate Altimeter—see page 15.
Opening the Main Menu
The main menu gives you access to
setup screens including waypoints,
tracks, and routes. See page 18 for
main menu settings pages.
From any page, press MENU
twice.
GPSMAP 62 Series Owners Manual 17
Using the Main Pages
Trip Computer
The trip computer displays your current
speed, average speed, maximum
speed, trip odometer, and other helpful
statistics.
Trip Computer Setup Options
From the trip computer, press MENU.
Reset—resets all the trip
computer values to zero. For
accurate information, reset the trip
information before beginning a trip.
Big Numbers—changes the size
of the numbers shown on the trip
computer page.
Change Dashboard—changes the
theme and information displayed on
the dashboard.
NOTE: Your customized settings
are remembered by the dashboard,
and will not be lost when you
change proles (page 19).
18 GPSMAP 62 Series Owners Manual
Main Menu Features and Settings
Main Menu Features
and Settings
Geocaches
Geocaching is a type of treasure
hunting, in which geocachers seek
hidden treasures using GPS coordinates
posted on the Internet by those hiding
the geocache.
Downloading Geocaches
1. Register your device (page 34).
2. Connect your device to your
computer (page 39).
3. Go to www.garmin.com/products
/communicator.
4. Download the Garmin
Communicator plug-in.
5. Go to www.garmin.com/geocache.
6. Follow the on-screen instructions
to download geocaches to your
device.
Navigating to a Geocache
1. From the main menu, select
Geocaches.
2. Select Find a Geocache.
3. Select a geocache.
4. Select Go.
Share Wirelessly
NOTE: The share wirelessly feature is
available only with the GPSMAP 62s
and GPSMAP 62st.
Your device can send or receive data
when connected to another compatible
device. You must be within 10 feet
(3 m) of the compatible Garmin device.
Sending and Receiving Data
1. From the main menu, select Share
Wirelessly.
2. Select Send or Receive.
3. Follow the on-screen instructions.
GPSMAP 62 Series Owners Manual 19
Main Menu Features and Settings
Proximity Alarms
Proximity alarms alert you when you
are approaching a predetermined area.
Setting a Proximity Alarm
1. From the main menu, select
Proximity Alarms.
2. Select Create New.
3. Select a category.
4. Select a point.
5. Select Use.
6. Enter a radius.
7. Select Done.
Prole Change
When you are using a prole and you
change settings such as data elds,
units of measurement, or position
settings, they are saved automatically
as part of the prole you are using.
For more information about
customizing your prole, see page 33.
Setting a Prole
1. From the main menu, select Prole
Change.
Your current prole is indicated on
the page.
2. Select a prole.
Area Calculation
Calculating the Size of an Area
1. From the main menu, select Area
Calculation > Start.
2. Walk around the perimeter of the
area you want to calculate.
3. Select Calculate when nished.
After you calculate the area, you can
save the track to your device and
change the unit of measure.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Garmin-GPSMap-62ST
  • al onze laptops “zien” de garmin niet, als ik deze insteek via USB.
    Wat kan hiervan de oorzaak zijn? En hoe kan ik dit aanpassen?
    Gesteld op 25-3-2022 om 16:05

    Reageer op deze vraag Misbruik melden
  • ik ben alle routes kwijt in mijn gps62s, hoe kan ik die herstellen Gesteld op 30-12-2021 om 14:35

    Reageer op deze vraag Misbruik melden
  • Als ik thuis een programma inlaad, dan begint hij, ook al start in op geheel andere plaats, met de kilometer tellinh vabaf thuis Gesteld op 22-12-2021 om 23:21

    Reageer op deze vraag Misbruik melden
  • hallo,
    bij het volgen van een track bevriest het scherm soms om dan na 2-3 minuten weer verder te gaan op de nieuwe positie. Heb tevens alle kaarten verwijderd behalve een osm van nederland.
    wat is er aan de hand?
    Harry Gesteld op 21-4-2021 om 21:57

    Reageer op deze vraag Misbruik melden
    • Twee mogelijkheden.
      Het zit in de kaart, probeer het met een andere dus ook Osm verwijderen.
      Geheugen zit vol, wis alle tracks en punten. Geantwoord op 22-4-2021 om 09:04

      Waardeer dit antwoord Misbruik melden
  • Bij zoeken op adres (find adressen) moet ik staat of provincie invullen, maar daarbij krijg ik steeds de melding zoekparameters aanpassen, met andere woorden ik kan dus niet zoeken op adres.
    mijn vraag hoe kan ik zoeken op adres? Gesteld op 10-3-2019 om 13:18

    Reageer op deze vraag Misbruik melden
    • Eerst het land in vullen geen provincie.
      Voer in volgende menu plaats in, daarna straat en als laatste huis numme
      Geantwoord op 10-3-2019 om 13:55

      Waardeer dit antwoord Misbruik melden
  • Ook bij invullen van het land, moet ik de zoekparameters aanpassen en wordt weer gevraagd, voer naam staat of provincie in.
    ik kan dus nog steeds niet zoeken op adres, voorheen lukte dat wel. Geantwoord op 10-3-2019 om 14:18

    Waardeer dit antwoord Misbruik melden
  • Bij mij verschijnt "adressen" niet als ik "find" kies. Doe ik iets verkeerd?
    (roosenrenaat@hotmail.com) Geantwoord op 3-6-2019 om 10:26

    Waardeer dit antwoord Misbruik melden
  • Welke kaart gebruik je? Dat kan het probleem wel eens zijn Geantwoord op 21-8-2019 om 20:22

    Waardeer dit antwoord Misbruik melden
  • Ik krijg bij gevarenzones alleen mijlen als dimensie en niet meters bij het instellen van de straal.
    Toch heb ik de eenheden op metrisch ingesteld in het hoofdmenu.
    Ik dacht dat ik wellicht het juiste profiel zou moeten kiezen . Dit staat nu ingesteld op geocaching.
    Hoe kan ik bij gevarenzones kiezen voor meters ipv mijlen? Gesteld op 21-12-2018 om 21:40

    Reageer op deze vraag Misbruik melden
    • Hallo , als je bij eenheden op enter drukt kom je vanzelf bij een sub pagina . Als je dan je dan bij afstand en snelheid ( wat blauw is ) op enter drukt kom je bij een ander sub pagina , waar je dan de meters in kunt stellen Geantwoord op 22-12-2018 om 09:17

      Waardeer dit antwoord Misbruik melden
6
  • Dat heb ik al ingesteld! Dan nog blijft bij gevarenzones geen andere keuze dan mijlen! Geantwoord op 22-12-2018 om 11:28

    Waardeer dit antwoord Misbruik melden
  • Wat vreemd , ik heb ook een GPS 62ST . Ik krijg bij gevarenzone ,, alarm maken ’’ voor te staan . Als ik die aan klik kom ik op een subpagina waar ik ,, gebruik kaart ,via punten , adressen , etc , zie staan . En dat alles in meters ..
    Geantwoord op 23-12-2018 om 09:56

    Waardeer dit antwoord Misbruik melden
  • Wellicht heb ik een software-update nodig? Ik heb al een mail naar Garmin verstuurd!
    Bedankt voor het meedenken. Geantwoord op 23-12-2018 om 10:08

    Waardeer dit antwoord Misbruik melden
  • Ik heb profielen gebruikt om eenheden bij gevarenzones in te stellen, is dat OK Gesteld op 21-12-2018 om 21:28

    Reageer op deze vraag Misbruik melden
    • Hallo , via ,, stel in ’’ ga je naar ,, eenheden ’’ en daar stel je alles metrisch in .( afstand en snelheid + hoogte + diepte ) Geantwoord op 22-12-2018 om 09:12

      Waardeer dit antwoord Misbruik melden
  • Hoe markeer ik een route in een rechte lijn tussen twee waypoints Gesteld op 11-9-2016 om 09:23

    Reageer op deze vraag Misbruik melden
  • waarom geen beeld als die op een stroombron is aangesloten via USB kabel. Alleen Garmin staat in het venster Gesteld op 14-6-2016 om 21:45

    Reageer op deze vraag Misbruik melden
  • Wil graag bij opstarten van GPS 62 st mijn naam en adres in het display hoe moet ik dat bewerkstellen zondag liepen we een tocht 25 km maar op het display stond na afloop 124 km in plaats van 25 km wat kan hier de oorzaak van zijn Gesteld op 26-5-2014 om 22:23

    Reageer op deze vraag Misbruik melden
  • Beste,

    Ik heb op een Micro SD een Topo kaart van Frankrijk geplaatst in mijn 62st. Als ik naar "Kaart" ga zie ik deze kaart niet. In het menu heb ik hem wel "Aan" staan. Mijn vraag; komt dit omdat ik op dit moment in Nederland ben? Zie ik deze kaart wel zodra ik in Frankrijk ben?

    Mvgr. Arno Gesteld op 17-7-2013 om 21:22

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GPSMap 62ST bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GPSMap 62ST in de taal/talen: Engels als bijlage per email.

De handleiding is 1,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Garmin GPSMap 62ST

Garmin GPSMap 62ST Gebruiksaanwijzing - Nederlands - 56 pagina's

Garmin GPSMap 62ST Gebruiksaanwijzing - Deutsch - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info