501972
56
Verklein
Vergroot
Pagina terug
1/100
Pagina verder
52 GPSMAP 700 Series Owner’s Manual
Device Conguration
Setting the GPS Accuracy Error Alarm
You can set an alarm to sound when the GPS location accuracy falls outside the user-dened value.
1. From the Home screen, select  >  > > >.
2. Enter the GPS location accuracy that triggers the alarm.
3. Select .
Setting the Total Fuel Onboard Alarm
The chartplotter must be connected to an external fuel sensor to capture fuel data.
You can set an alarm to sound when the total amount of remaining onboard fuel reaches the level you specify.
1. From the Home screen, select  >  > > > .
2. Enter the amount of fuel that triggers the alarm.
3. Select .
Collision Alarm
See “Setting the Safe-zone Collision Alarm” (page 15).
Setting Sonar Alarms
See “Sonar Alarms” (page 77).
Setting Weather Alarms
See the GPSMAP 700 Series XM WX Satellite Weather
®
and XM Satellite Radio Supplement (North America
only).
Chartplotter Data Management
Copying Waypoints, Routes, and Tracks to a Chartplotter
Before you copy MapSource
®
or HomePort data to a chartplotter, you must complete the following actions:
The rst time that you use a memory card to copy HomePort or MapSource
®
data to a chartplotter, you
must prepare the memory card by inserting it into the chartplotter and allowing the chartplotter to place a
le on it. This le provides information to HomePort or to MapSource to format the data.
Check the MapSource version on your computer by clicking  > . If the software
version is older than 6.12.2, update to the current version by clicking  > 
.
1. Complete an action:
Copy the data from HomePort to the prepared memory card (using an SD card reader attached to the
computer) according to the process described in the HomePort Help system.
Copy the data from MapSource to the prepared memory card (using an SD card reader attached to the
computer) according to the process described in the MapSource Help system.
2. Copy the data from the data card to the chartplotter. See “Copying Data from a Data Card”
(page 52).
Copying Data from a Data Card
1. Insert a data card into the SD card slot on the chartplotter.
2. From the Home screen, select  >  >  > .
3. Complete an action:
Select  to transfer data from the data card to the chartplotter and combine it with
existing user data.
Select  to transfer data from the data card to the chartplotter and overwrite existing
user data on the chartplotter.
4. Select the le name from the list if multiple les are listed.
56

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GPSMAP 740 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GPSMAP 740 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Garmin GPSMAP 740

Garmin GPSMAP 740 Installatiehandleiding - Nederlands - 8 pagina's

Garmin GPSMAP 740 Gebruiksaanwijzing - Nederlands - 100 pagina's

Garmin GPSMAP 740 Installatiehandleiding - Deutsch - 10 pagina's

Garmin GPSMAP 740 Gebruiksaanwijzing - Deutsch - 104 pagina's

Garmin GPSMAP 740 Installatiehandleiding - English - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info