522235
96
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
86
Appendix H
Unit Installation
The GPSMAP 182/182C/232 with external antenna can be fl ush mounted on a fl at panel of .08-
.52” thickness using the cam lobe feature on its gimbal mounting bracket. When fl ush mounting the
GPSMAP 182/182C/232, be sure to choose an appropriately sized location for the unit (see unit dimen-
sions pg. 83) and leave 1.25” (32mm) clearance below the data card slot for inserting/removing data
cards. For fl ush mounting the GPSMAP 232 unit, skip to the next set of instructions.
To ush mount the GPSMAP 182/182C unit using the gimbal mounting bracket:
1. Cut a 4.33”W x 4.33”H (110 x 110 mm) hole in the panel.
2. Place the GPSMAP 182/182C/232 into the hole from the front until the fl ange rests against the
mounting surface.
3. From the back of the panel, loosely attach the bracket such that the slot in the ratchet area points
away from the mounting panel (fi gure 1).
4. Rotate the bracket downward until the panel is pinched tightly between the unit’s fl ange and
bracket lobe (fi gure 1).
5. Tighten the knobs and connect the power/data and antenna cables. Note: if the panel is too thick
to allow use of the supplied knobs, two M6 screws may be used to secure the bracket.
The GPSMAP 182/182C/232, with external antenna, may also be fl ush mounted on a fl at panel
using its existing mounting bracket.
To ush mount the GPSMAP 182/182C/232 unit:
1. Remove the four M5 screws from the back of the unit and remove the mounting bracket.
2. Using the mounting bracket as a template, outline the center relief area and mark the location of
the four screw holes centers on your bulkhead or other surface (fi gure 2).
3. Cut the relief hole from the panel and drill the four 0.20” (5.08 mm) screw holes.
4. Place the GPSMAP 182/182C/232 into the relief hole until it rests fl ush against the mounting
surface.
5. Secure the unit to the mounting surface using the M5 screws. Do not try to force the screws deeper
into the holes than the holes will allow. For thick mounting surfaces, insert the M5 screws directly
thru the drilled holes (fi gure 3). For thin panels, place the mounting bracket on the back side of the
panel for more support. Connect the power/data and antenna cables.
Figure 1
Figure 2
Figure 3
Pull gimbal bracket down
until cam lobe contacts
surface.
182C Manual Part 2.indd 86 6/4/2003, 2:54:32 PM
96

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin GPSMAP 182C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin GPSMAP 182C in de taal/talen: Engels als bijlage per email.

De handleiding is 2,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info