Handleiding Garmin GPS Map 65 (pagina 10 van 20) (Engels)

740412

Verklein

Vergroot

Pagina terug

1/20

Pagina verder

Follow the on-screen instructions.

Setting a Proximity Alarm

Proximity alarms alert you when you are within a specified range

of a particular location.

Select Proximity Alarms > Create Alarm.

Select a category.

Select a location.

Select Use.

Enter a radius.

When you enter an area with a proximity alarm, the device

sounds a tone.

Selecting a Profile

When you change activities, you can change the setup of the

device by changing the profile.

Select Profile Change.

Select a profile.

Area Calculation

Calculating the Size of an Area

Select Area Calculation > Start.

Walk around the perimeter of the area you want to calculate.

Select Calculate when finished.

Satellite Page

The satellite page shows your current location, GPS accuracy,

satellite locations, and signal strength.

GPS Satellite Settings

Select Satellite > MENU.

NOTE: Some settings are only available when Demo Mode is

enabled.

Demo Mode: Allows you to turn the GPS off.

Satellite System: Allows you to turn the GPS on.

Track Up: Indicates whether satellites are shown with rings

oriented with north toward the top of the screen or oriented

with your current track toward the top of the screen.

Single Color: Allows you to select whether the satellite page is

displayed in multicolor or single color.

Set Location On Map: Allows you to mark your current location

on the map. You can use this location to create routes or

search for saved locations.

AutoLocate Position: Calculates your GPS position using the

Garmin AutoLocate

feature.

Garmin Adventures

You can group related items together as an adventure. For

example, you can create an adventure for your latest hiking trip.

The adventure could contain the track log of the trip, photos of

the trip, and geocaches you hunted. You can use BaseCamp

™

to create and manage your adventures. For more information,

go to www.garmin.com/basecamp.

Sending Files to BaseCamp

Open BaseCamp.

Connect the device to your computer.

On Windows

computers, the device appears as a removable

drive or a portable device, and the memory card may appear

as a second removable drive. On Mac

computers, the device

and memory card appear as mounted volumes.

NOTE: Some computers with multiple network drives may not

display device drives properly. See your operating system

documentation to learn how to map the drive.

Open the Garmin or memory card drive or volume.

Select an option:

• Select an item from a connected device and drag it to My

Collection or to a list.

• From BaseCamp, select Device > Receive from Device,

and select the device.

Creating an Adventure

Before you can create an adventure and send it to your device,

you must download BaseCamp to your computer and transfer a

track from your device to your computer (Sending Files to

BaseCamp, page 6).

Open BaseCamp.

Select File > New > Garmin Adventure.

Select a track, and select Next.

If necessary, add items from BaseCamp.

Complete the required fields to name and describe the

adventure.

If you want to change the cover photo for the adventure,

select Change, and select a different photo.

Select Finish.

Starting an Adventure

Before you can start an adventure, you must send an adventure

from BaseCamp to your device (Sending Files to BaseCamp,

page 6).

Select Adventures.

Select an adventure.

Select Start.

Using the VIRB

Remote

Before you can use the VIRB remote function, you must enable

the remote setting on your VIRB camera. See the VIRB Series

Owner's Manual for more information.

The VIRB remote function allows you to control your VIRB

action camera using your device.

Turn on your VIRB camera.

On your GPSMAP 65/65s device, select VIRB Remote.

Wait while the device connects to your VIRB camera.

Select an option:

• To record video, select REC.

• To take a photograph, select Take Photo.

Waypoint Averaging

You can refine a waypoint location for more accuracy. When

averaging, the device takes several readings at the same

location and uses the average value to provide more accuracy.

Select Waypoint Manager.

Select a waypoint.

Select MENU > Average Location.

Move to the waypoint location.

Select Start.

Follow the on-screen instructions.

When the confidence status bar reaches 100%, select Save.

For best results, collect four to eight samples for the waypoint,

waiting at least 90 minutes between samples.

6 Main Menu Features and Settings

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin GPS Map 65 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Garmin GPS Map 65

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info