Handleiding Garmin Fleet 660 (pagina 14 van 22) (Engels)

674211

Verklein

Vergroot

Pagina terug

1/22

Pagina verder

Select > Reset.

Viewing Fuel Economy Information

Select > ecoRoute™ > Fuel Economy.

Select a section of the graph to zoom in.

Mileage Reports

Mileage reports provide the distance, the time, the average fuel

economy, and the fuel cost of navigating to a destination.

A mileage report is created for every route that you drive. If you

stop a route on your device, a mileage report is created for the

distance you traveled.

Viewing a Mileage Report

You can view saved mileage reports on the device.

TIP: You can connect the device to your computer and access

mileage reports in the Reports folder on the device.

Select > ecoRoute™ > Mileage Report.

Select a report.

Resetting ecoRoute Information

Select > ecoRoute™ > Vehicle Profile.

Select Reset.

Driving Tips

• Drive the speed limit. In most vehicles, you will achieve

optimal fuel economy between 45 mph and 60 mph.

• Drive a consistent speed.

• Brake and accelerate gradually and consistently.

• Avoid stop-and-go traffic and rush hour.

• Do not rest your foot on the brake pedal.

• Use the cruise control.

• Turn your vehicle off instead of idling for temporary stops.

• Combine small trips into one longer trip with multiple stops.

• Turn off the air conditioner and open your windows, unless

you are traveling at high speeds on the highway.

• Tighten your gas cap.

• Park in the shade or in the garage.

• Unload excess weight. Remove unneeded items from your

vehicle.

• Avoid carrying items on your roof. Remove rooftop carriers

and removable racks when not in use.

• Maintain the recommended tire pressure. Check tire

pressure regularly and before long trips.

• Keep your vehicle well-tuned, and follow the vehicle

manufacturer’s recommended maintenance intervals.

• Change your oil, oil filters, and air filters regularly.

• Use the lowest recommended suitable grade of fuel. Use

biofuels when feasible, such as E85 and biodiesel.

Planning a Trip

You can use the trip planner to create and save a trip with

multiple destinations.

Select > Trip Planner.

Select New Trip.

Select Select Start Location.

Search for a location (Finding a Location by Category).

Select Select.

To add additional locations, select .

Select Next.

Select Save.

Enter a name, and select Done.

Scheduling a Trip

You can use the trip planner to create and save a trip with

multiple destinations.

Select > Trip Planner.

Select a trip.

Select a location.

Select an option:

• Select Departure Time.

• Select Arrival Time.

Select a date and time, and select Save.

Select Duration.

Select the amount of time you will spend at the location, and

select Save.

If necessary, repeat steps 3–7 for each location.

Navigating to a Saved Trip

Select > Trip Planner.

Select a saved trip.

Select Go!.

Select your next destination, and select Start.

Editing a Saved Trip

Select > Trip Planner.

Select a saved trip.

Select .

Select an option:

• Select Rename Trip.

• Select Edit Destinations to add and delete a location, or

to change the order of locations.

• Select Delete Trip.

• Select Optimize Order to arrange the stops on your trip

in the most-efficient order.

Viewing Previous Routes and Destinations

Before you can use this feature, you must enable the travel

history feature (Device and Privacy Settings).

You can view your previous routes and places you have

stopped on the map.

Select > Where I've Been.

Data Management

You can store files on your device. The device has a memory

card slot for additional data storage.

NOTE: The device is not compatible with Windows

95, 98,

Me, Windows NT

, and Mac

OS 10.3 and earlier.

About Memory Cards

You can purchase memory cards from an electronics supplier,

or purchase pre-loaded Garmin mapping software

(www.garmin.com). In addition to map and data storage, the

memory card can be used to store files such as maps, images,

geocaches, routes, waypoints, and custom POIs.

Installing a Memory Card

The device supports microSD™ and microSDHC memory cards.

Insert a memory card into the slot on the device.

Press it in until it clicks.

Connecting the Device to Your Computer

You can connect the device to your computer using a USB

cable.

10 Data Management

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin Fleet 660 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Garmin Fleet 660

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info