Handleiding Garmin ECHOMAP Ultra serie (pagina 39 van 52) (Engels)

691420

Verklein

Vergroot

Pagina terug

1/52

Pagina verder

NOTE: The source menu appears only for devices that

support multiple media sources.

Select a source.

Playing Music

Browsing for Music

From the media screen, select Browse or Menu > Browse.

Select Select Position or select an option.

Enabling Alphabetical Search

You can enable the alphabetical search feature to find a song or

album in a large list.

From the media screen, select Menu > Installation > Alpha

Search.

Setting a Song to Repeat

While playing a song, select Menu > Repeat.

If necessary, select Single.

Setting All Songs to Repeat

From the media screen, select Menu > Repeat > All.

Setting Songs to Shuffle

From the media screen, select Menu > Shuffle.

If necessary, select an option.

Adjusting the Volume

Enabling and Disabling Zones

If you have wired your vessel's speakers into zones, you can

enable needed zones and disable unused zones.

From the media screen, select Menu > Audio Levels >

Enable/Disable Zones.

Select a zone.

Muting the Media Volume

From the media screen, select .

If necessary, select Select Position.

VHF Radio

NOTE: These features are available on some stereos with a

VHF receiver.

Scanning VHF Channels

Before you can scan VHF channels, you must set the source to

VHF.

You can monitor VHF channels saved as presets for activity and

automatically switch to an active channel.

From the VHF media screen, select Menu > Scan.

Adjusting the VHF Squelch

NOTE: This feature is available on some stereos with a VHF

receiver.

From the VHF source page, select Menu > Squelch.

Use the slider bar to adjust the VHF squelch.

Radio

To listen to AM or FM radio, you must have a suitable marine

AM/FM antenna properly connected to the stereo and be within

range of a broadcasting station. For instructions on connecting

an AM/FM antenna, see the stereo installation instructions.

To listen to DAB stations, you must have the appropriate

equipment (DAB Playback, page 33). For instructions on

connecting a DAB adapter and antenna, see the installation

instructions provided with your adapter and antenna.

Setting the Tuner Region

From the media screen, select Menu > Installation > Tuner

Region.

Select an option.

Changing the Radio Station

From the media screen, select an applicable source, such as

FM.

Select or to tune to a station.

Changing the Tuning Mode

You can change how you select a station for some media types,

such as FM or AM radio.

NOTE: Not all tuning modes are available for all media sources.

From the media screen, select Menu > Tuning Mode.

Select an option.

If necessary, select Select Position.

Presets

You can save your favorite AM stations and FM stations as

presets for easy access.

You can save your favorite DAB stations if you are connected to

an optional DAB antenna.

Saving a Station as a Preset

From an applicable media screen, tune to the station to save

as a preset.

Select Presets > Add Current Channel.

Removing a Preset

From an applicable media screen, select Presets.

Select a preset from the list.

Select Remove Current Channel.

DAB Playback

When you connect a compatible Digital Audio Broadcasting

(DAB) module and antenna, such as the FUSION

MS-

DAB100A to a compatible stereo, you can tune in to and play

DAB stations

To use the DAB source, you must be in a region in which DAB is

available, and select the tuner region (Setting the DAB Tuner

Region, page 33).

Setting the DAB Tuner Region

You must select the region you are in to receive DAB stations

properly.

From the media screen, select Menu > Installation > Tuner

Region.

Select the region you are in.

Scanning for DAB Stations

Before you can scan for DAB stations, you must connect a

compatible DAB module and antenna (not included) to the

stereo. Because DAB signals are broadcast in select countries

only, you must also set the tuner region to a location where DAB

signals are broadcast.

Select the DAB source.

Select Scan to scan for available DAB stations.

When scanning is complete, the first available station in the

first ensemble found begins playing.

NOTE: After the first scan is complete, you can select Scan

again to re-scan for DAB stations. When the re-scan is

complete, the system starts playing the first station in the

ensemble you were listening to when you started the re-scan.

Changing DAB Stations

Select the DAB source.

Media Player 33

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin ECHOMAP Ultra serie Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Garmin ECHOMAP Ultra serie

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info