650681

Garmin DriveAssist 50LMT Handleiding

3
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
Garmin DriveAssist
™
50
Owner’s Manual
June 2016 190-01923-00_0B
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
Garmin
®
and the Garmin logo are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used
without the express permission of Garmin.
Garmin babyCam
™
, Garmin Connect
™
, Garmin DriveAssist
™
, Garmin Express
™
, Garmin Real Vision
™
, and myTrends
™
are trademarks of Garmin Ltd. or its
subsidiaries. These trademarks may not be used without the express permission of Garmin.
Android
™
is a trademark of Google Inc. Apple
®
and Mac
®
are trademarks of Apple Inc, registered in the U.S. and other countries. The Bluetooth
®
word mark and
logos are owned by the Bluetooth SIG, Inc., and any use of such word mark or logo by Garmin is under license. Foursquare
®
is a trademark of Foursquare
Labs, Inc. in the U.S. and in other countries. microSD
™
and the microSDHC logo are trademarks of SD-3C, LLC. Windows
®
, Windows Vista
®
, and Windows XP
®
are registered trademarks of Microsoft Corporation in the United States and other countries.
Table of Contents
Getting Started............................................................... 1
Support and Updates.................................................................. 1
Updating Maps and Software with Garmin Express.............. 1
Garmin DriveAssist Device Overview......................................... 1
Installing the Dash Camera Memory Card..................................2
Connecting the Device to Vehicle Power................................... 2
Turning the Device On or Off...................................................... 2
Acquiring GPS Signals............................................................... 2
Status Bar Icons......................................................................... 2
Using the On-Screen Buttons..................................................... 2
Adjusting the Volume.................................................................. 2
Enabling Automatic Volume................................................... 3
Using the Audio Mixer............................................................ 3
Adjusting the Screen Brightness................................................ 3
Dash Camera.................................................................. 3
Aligning the Camera................................................................... 3
Dash Camera Recording............................................................ 3
Saving a Video Recording..................................................... 3
Taking a Photo....................................................................... 3
Stopping or Starting Dash Camera Recording...................... 3
Viewing Videos and Photos........................................................ 3
Videos and Photos on Your Computer.................................. 3
Deleting a Video or Photo........................................................... 3
Driver Awareness Features and Alerts........................ 3
Enabling or Disabling Audible Driver Alerts................................ 4
Red Light and Speed Cameras.................................................. 4
Advanced Driving Assistance System........................................ 4
Enabling or Disabling Advanced Driving Assistance
Features
................................................................................. 4
Go Alert.................................................................................. 4
Forward Collision Warning System........................................ 4
Lane Departure Warning System...........................................4
Navigating to Your Destination..................................... 5
Routes........................................................................................ 5
Starting a Route.......................................................................... 5
Starting a Route by Using the Map........................................ 5
Going Home........................................................................... 5
Your Route on the Map...............................................................5
Active Lane Guidance............................................................ 6
Viewing Turns and Directions................................................ 6
Viewing the Entire Route on the Map.................................... 6
Destination Arrival with Garmin Real Vision™ Assistance......... 6
Adding a Location to Your Route................................................ 6
Shaping Your Route................................................................... 6
Taking a Detour.......................................................................... 6
Stopping the Route..................................................................... 6
Changing the Route Calculation Mode....................................... 6
Trip Planner................................................................................ 7
Planning a Trip....................................................................... 7
Navigating to a Saved Trip.....................................................7
Optimizing the Order of Destinations in a Trip....................... 7
Editing and Reordering Locations in a Trip............................ 7
Editing and Saving Your Active Route................................... 7
Changing Routing Options for a Trip..................................... 7
Scheduling a Trip................................................................... 7
Using Suggested Routes............................................................ 7
Avoiding Delays, Tolls, and Areas.............................................. 7
Avoiding Traffic Delays on Your Route.................................. 7
Avoiding Toll Roads............................................................... 8
Avoiding Toll Stickers.............................................................8
Avoiding Road Features........................................................ 8
Avoiding Environmental Zones.............................................. 8
Custom Avoidances............................................................... 8
Navigating Off Road
................................................................... 8
Finding and Saving Locations...................................... 8
Finding a Location Using the Search Bar................................... 8
Viewing Search Results on the Map........................................... 9
Changing the Search Area......................................................... 9
Points of Interest......................................................................... 9
Finding a Location by Category............................................. 9
Searching Within a Category................................................. 9
Navigating to Points of Interest Within a Venue.................... 9
Foursquare.............................................................................9
Search Tools.............................................................................10
Finding an Address.............................................................. 10
Finding an Intersection.........................................................10
Finding a City....................................................................... 10
Finding a Location Using Coordinates................................. 10
Viewing Recently Found Locations.......................................... 10
Clearing the List of Recently Found Locations.................... 10
Finding Your Last Parking Spot................................................ 10
Viewing Current Location Information...................................... 10
Finding Emergency Services and Fuel................................ 10
Getting Directions to Your Current Location........................ 10
Adding a Shortcut..................................................................... 10
Removing a Shortcut........................................................... 10
Saving Locations...................................................................... 10
Saving a Location................................................................ 10
Saving Your Current Location.............................................. 10
Editing a Saved Location..................................................... 10
Assigning Categories to a Saved Location.......................... 11
Deleting a Saved Location................................................... 11
Using the Map............................................................... 11
Map Tools................................................................................. 11
Viewing a Map Tool............................................................. 11
Enabling Map Tools............................................................. 11
Up Ahead.................................................................................. 11
Viewing Upcoming Locations............................................... 11
Customizing the Up Ahead Categories................................ 11
Trip Information.........................................................................12
Viewing Trip Data from the Map.......................................... 12
Viewing the Trip Information Page....................................... 12
Viewing the Trip Log............................................................ 12
Resetting Trip Information....................................................12
Viewing Upcoming Traffic......................................................... 12
Viewing Traffic on the Map.................................................. 12
Searching for Traffic Incidents............................................. 12
Customizing the Map................................................................ 12
Customizing the Map Layers............................................... 12
Changing the Map Data Field.............................................. 12
Changing the Map Perspective............................................ 12
Traffic Data.................................................................... 12
Receiving Traffic Data Using a Traffic Receiver....................... 12
Receiving Traffic Data Using Smartphone Link........................ 13
About Traffic Subscriptions....................................................... 13
Viewing Traffic Subscriptions............................................... 13
Adding a Subscription.......................................................... 13
Enabling Traffic......................................................................... 13
Voice Command........................................................... 13
Setting the Wakeup Phrase...................................................... 13
Activating Voice Command.......................................................13
Voice Command Tips............................................................... 13
Starting a Route Using Voice Command.................................. 13
Saving a Video Recording Using Voice Command.................. 13
Muting Instructions....................................................................13
Voice Control............................................................................ 13
Configuring Voice Control.................................................... 13
Using Voice Control............................................................. 13
Table of Contents i
Voice Control Tips................................................................14
Bluetooth Connected Features................................... 14
Pairing with Your Phone and Connecting to Smartphone
Link........................................................................................... 14
Bluetooth Feature Status Icons................................................ 14
Setting Up Bluetooth Features for Your Apple Device............. 14
Connecting to the Smartphone Link App on Your Apple
Device
.................................................................................. 14
Disabling Hands-Free Calling for Your Apple Device.......... 14
Disabling Smartphone Link Data and Smart Notifications for
Your Apple Device............................................................... 14
Setting Up Bluetooth Features for Your Smartphone with
Android™.................................................................................. 15
Connecting to the Smartphone Link App on Your Android
Smartphone......................................................................... 15
Disabling Bluetooth Features for Your Smartphone with
Android.................................................................................15
Smartphone Link.......................................................................15
Downloading Smartphone Link............................................ 15
Sending a Location from Your Phone to Your Device......... 15
Garmin Live Services................................................................15
Subscribing to Garmin Live Services................................... 15
Smart Notifications....................................................................15
Receiving Notifications.........................................................15
Viewing the List of Notifications........................................... 16
Hands-Free Calling................................................................... 16
Placing a Call....................................................................... 16
Receiving a Call................................................................... 16
Using the Call History.......................................................... 16
Using In-Call Options........................................................... 16
Saving a Home Phone Number........................................... 16
Disconnecting a Bluetooth Device............................................ 17
Deleting a Paired Phone........................................................... 17
Using the Apps............................................................. 17
Viewing Help Files.................................................................... 17
Searching Help Topics......................................................... 17
Viewing the Weather Forecast..................................................17
Viewing Weather Near a Different City................................ 17
Viewing the Weather Radar................................................. 17
Viewing Weather Alerts........................................................17
Checking Road Conditions.................................................. 17
photoLive Traffic Cameras........................................................17
Saving a Traffic Camera...................................................... 17
Viewing a Traffic Camera.....................................................17
Viewing Previous Routes and Destinations.............................. 17
Customizing the Device............................................... 17
Map and Vehicle Settings......................................................... 17
Enabling Maps..................................................................... 17
Navigation Settings................................................................... 18
Calculation Mode Settings................................................... 18
Setting a Simulated Location............................................... 18
Camera Settings....................................................................... 18
Backup Camera Settings.......................................................... 18
babyCam Settings.................................................................... 18
Bluetooth Settings.....................................................................18
Disabling Bluetooth.............................................................. 18
Display Settings........................................................................ 19
Traffic Settings.......................................................................... 19
Units and Time Settings............................................................19
Setting the Time................................................................... 19
Language and Keyboard Settings............................................ 19
Proximity Alerts Settings........................................................... 19
Device and Privacy Settings..................................................... 19
Restoring Settings.................................................................... 19
Device Information....................................................... 19
Specifications
............................................................................19
Power Cables........................................................................... 19
Charging the Device............................................................ 19
Device Maintenance..................................................... 20
Device Care.............................................................................. 20
Cleaning the Camera Lens.................................................. 20
Cleaning the Outer Casing...................................................20
Cleaning the Touchscreen................................................... 20
Avoiding Theft...................................................................... 20
Resetting the Device.................................................................20
Removing the Device, Mount, and Suction Cup....................... 20
Removing the Device from the Mount..................................20
Removing the Mount from the Suction Cup......................... 20
Removing the Suction Cup from the Windshield................. 20
Changing the Fuse in the Vehicle Power Cable....................... 20
Troubleshooting........................................................... 20
My video recordings are blurry................................................. 20
My video recordings are choppy or incomplete........................ 20
How can I extend the life of my camera memory card?........... 20
The suction cup will not stay on my windshield........................ 21
My device is not acquiring satellite signals............................... 21
The device does not charge in my vehicle............................... 21
My battery does not stay charged for very long........................ 21
My device does not appear as a removable drive on my
computer................................................................................... 21
My device does not appear as a portable device on my
computer................................................................................... 21
My device does not appear as either a portable device or a
removable drive or volume on my computer.............................21
My phone will not connect to the device................................... 21
Appendix....................................................................... 21
Installing a Memory Card for Maps and Data........................... 21
Data Management.................................................................... 21
About Memory Cards........................................................... 21
Connecting the Device to Your Computer........................... 21
Transferring Data From Your Computer.............................. 22
Viewing GPS Signal Status...................................................... 22
Purchasing Additional Maps..................................................... 22
Purchasing Accessories........................................................... 22
Index.............................................................................. 23
ii Table of Contents
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
• Install the camera memory card (Installing the Dash Camera
Memory Card, page 2).
• Update the maps and software on your device (Updating
Maps and Software with Garmin Express, page 1).
• Mount the device in your vehicle and connect it to power
(Connecting the Device to Vehicle Power, page 2).
• Align the dash camera (Aligning the Camera, page 3).
• Acquire GPS signals (Acquiring GPS Signals, page 2).
• Adjust the volume (Adjusting the Volume, page 2) and
display brightness (Adjusting the Screen Brightness,
page 3).
• Navigate to your destination (Starting a Route, page 5).
Support and Updates
Garmin Express
™
(garmin.com/express) provides easy access
to these services for Garmin
®
devices.
• Product registration
• Product manuals
• Software updates
• Data uploads to Garmin Connect
™
• Map, chart, or course updates
• Vehicles, voices, and other extras
Updating Maps and Software with Garmin Express
You can use Garmin Express software to download and install
the latest map and software updates for your device. Map
updates provide the latest available mapping data to ensure
your device continues to calculate accurate and efficient routes
to your destinations. Garmin Express is available for Windows
®
and Mac
®
computers.
1
On your computer, go to www.garmin.com/express.
2
Select an option:
• To install on a Windows computer, select Download for
Windows.
• To install on a Mac computer, select Download for Mac.
3
Open the downloaded file, and follow the on-screen
instructions to complete the installation.
4
Start Garmin Express.
5
Connect your Garmin device to your computer using a USB
cable.
6
Click Add a Device.
The Garmin Express software detects your device.
7
Click Add Device.
8
Follow the on-screen instructions to add your device to the
Garmin Express software.
When setup is complete, the Garmin Express software
searches for map and software updates for your device.
9
Select an option:
• To install all available updates, click Install All.
• To install a single update, click View Details and select an
update.
The Garmin Express software downloads and installs the
updates onto your device. Map updates are very large, and this
process may take a long time on slower Internet connections.
Garmin DriveAssist Device Overview
À
Power key
Á
USB power and data port
Â
Camera memory card slot
Ã
Microphone for Voice Command or hands-free calling
Ä
Map and data memory card slot
Getting Started 1
Installing the Dash Camera Memory Card
Before the device can record video from the integrated dash
camera, you must install a camera memory card. The camera
requires a microSD
™
memory card from 4 to 64 GB with a speed
rating of class 10 or higher. You can use the included memory
card, or you can purchase a compatible memory card from an
electronics supplier.
1
Insert a memory card
À
into the camera memory card slot
Á
.
NOTE: If you install the memory card into the incorrect slot,
the camera cannot record video.
2
Press it in until it clicks.
Connecting the Device to Vehicle Power
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Before you use your device on battery power, you should charge
it.
1
Plug the vehicle power cable
À
into the USB port on the
device.
2
Press the mount
Á
onto the suction cup
Â
until it snaps into
place.
3
Press the suction cup to the windshield, and flip the lever
Ã
back toward the windshield.
4
Fit the tab on the top of the mount into the slot on the back of
the device.
5
Press the bottom of the mount into the device until it clicks.
6
Plug the other end of the vehicle power cable into a power
outlet in your vehicle.
Turning the Device On or Off
• To turn the device on, press the power key, or connect the
device to power.
• To put the device in power saving mode, press the power key
while the device is on.
While in power saving mode, the screen is off and the device
uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power
saving mode while charging the battery.
• To turn off the device completely, hold the power key until a
prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the
power key before the prompt appears, the device enters
power saving mode.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver
must collect satellite data and establish the current location.
in the status bar indicates the satellite signal strength. The time
required to acquire satellite signals varies based on several
factors, including how far you are from the location where you
last used your navigation device, whether you have a clear view
of the sky, and how long it has been since you last used your
navigation device. The first time you turn on your navigation
device, it may take several minutes to acquire satellite signals.
1
Turn on the device.
2
Wait while the device locates satellites.
3
If necessary, go outdoors to an open area, away from tall
buildings and trees.
When turns green, the device has acquired satellite signals
and is ready for navigation.
Status Bar Icons
The status bar is located at the top of the main menu. The status
bar icons display information about features on the device. You
can select some icons to change settings or view additional
information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information (Viewing GPS Signal Status, page 22).
Bluetooth
®
technology status. Select to view the Bluetooth
settings (Bluetooth Settings, page 18).
Connected to hands-free calling. Select to place a phone call
(Hands-Free Calling, page 16).
Current time. Select to set the time (Setting the Time,
page 19).
Battery charge level.
Connected to the Smartphone Link app. Select to view
connected device and subscription information (Pairing with
Your Phone and Connecting to Smartphone Link,
page 14).
Temperature. Select to view the weather forecast (Viewing
the Weather Forecast, page 17).
Dash camera recording status. Select to view the dash cam
video (Dash Camera, page 3).
Using the On-Screen Buttons
On-screen buttons allow you to navigate the pages, menus, and
menu options on your device.
• Select to return to the previous menu screen.
• Hold to quickly return to the main menu.
• Select or to scroll through lists or menus.
• Hold or to scroll faster.
• Select to see a context-based menu of options for the
current screen.
Adjusting the Volume
1
Select Volume.
2
Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select for additional options.
2 Getting Started
Enabling Automatic Volume
Your device can increase or decrease the volume automatically
based on the level of background noise.
1
Select Volume > .
2
Select Automatic Volume.
Using the Audio Mixer
You can use the audio mixer to set the volume levels for
different audio types, such as navigation prompts or phone calls.
The level for each audio type is a percentage of the master
volume.
1
Select Volume.
2
Select > Audio Mixer.
3
Use the sliders to adjust the volume for each audio type.
Adjusting the Screen Brightness
1
Select Settings > Display > Brightness.
2
Use the slider bar to adjust the brightness.
Dash Camera
Aligning the Camera
WARNING
Do not attempt to align the camera while driving.
You should align the dash camera each time you mount or
reposition the device. The advanced driver assistance features
may not perform properly if the camera is not aligned.
1
Select Settings > Camera > > Alignment.
2
Tilt the device and turn the camera left or right to align the
camera.
The crosshairs should point straight ahead, and the horizon
line should be centered between the top and bottom of the
screen.
Dash Camera Recording
NOTICE
Legal Restrictions
In some jurisdictions it could be considered an invasion of
privacy rights to take or publicly display photographs or videos
of people or their vehicles using this product. It is your
responsibility to know and comply with applicable laws and
rights to privacy in your jurisdiction.
Before you can record video, you must install a camera memory
card (Installing the Dash Camera Memory Card, page 2).
By default, the device immediately starts recording video when it
turns on. It continues recording, overwriting the oldest, non-
saved video until it turns off. While recording, the LED is solid
red.
Saving a Video Recording
By default, the device uses a sensor to detect possible
accidental collisions and saves video footage before, during,
and after the detected event.
You can also manually save video at any time.
1
While recording, select Apps > Dash Cam > .
The device saves a photo and the video footage before,
during, and after you select .
2
Select again to extend the saved recording time (optional).
A message indicates the amount of video footage to be
saved.
The memory card has limited storage. After you save a video
recording, you should transfer the recording to your computer or
other external storage location for permanent storage (Videos
and Photos on Your Computer, page 3).
Taking a Photo
You can take still photographs with this device. By default, the
device stores time and location information with the photo.
Select Apps > Dash Cam > .
The device takes a photo and saves it to the memory card.
Stopping or Starting Dash Camera Recording
1
Select Apps > Dash Cam.
2
Select an option:
• To stop recording, select .
TIP: By default, recording starts automatically the next
time you turn on the device. You can disable this option in
the camera settings (Camera Settings, page 18).
• To start recording, select .
Viewing Videos and Photos
NOTE: The device stops recording video while you view videos
or photos.
1
Select Apps > Gallery > Yes.
2
Select a video or photo.
The device displays the video or photo. Videos start playing
automatically. If the video or photo includes location
information, a map shows the location.
Videos and Photos on Your Computer
The Garmin Dash Cam Player application allows you to view,
save, and edit recorded videos on your computer. You can also
view and overlay time, date, location, and speed information
recorded with the video. Go to www.garmin.com/dashcamplayer
for more information.
Deleting a Video or Photo
1
Select Apps > Gallery > Yes.
2
Select a video or photo.
3
Select > Yes.
Driver Awareness Features and Alerts
NOTICE
The driver alerts and speed limit features are for information
only and do not replace your responsibility to abide by all posted
speed limit signs and to use safe driving judgment at all times.
Garmin is not responsible for any traffic fines or citations you
receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer
driving and increase efficiency, even when you are driving in a
familiar area. The device plays an audible tone or message and
displays information for each alert. You can enable or disable
the audible tone or message for each type of alert. Not all alerts
are available in all areas.
School zone or nearby school: The device plays a tone and
displays the distance to and speed limit (if available) for an
upcoming school or school zone.
Speed limit reduction: The device plays a tone and displays
the upcoming reduced speed limit so you can be prepared to
reduce your speed.
Speed limit exceeded: The device plays a tone and displays a
red border on the speed limit icon when you exceed the
posted speed limit for the current road.
Wrong way on a one-way street: The device plays a message
and displays a full-screen warning if you travel the wrong way
on a one-way street. The edges of the screen appear red and
Dash Camera 3
an alert remains at the top of the screen until you leave the
one-way street or correct your direction of travel.
Railroad crossing: The device plays a tone and displays the
distance to an upcoming railroad crossing.
Animal crossing: The device plays a tone and displays the
distance to an upcoming animal crossing area.
Curve: The device plays a tone and displays the distance to a
curve in the road.
Slower traffic: The device plays a tone and displays the
distance to slower traffic when you approach slower traffic at
a higher speed. Your device must be receiving traffic
information to use this feature (Receiving Traffic Data Using
a Traffic Receiver, page 12).
Fatigue warning: The device plays a tone and suggests
upcoming rest stops after you have been driving for more
than two hours without stopping.
Forward collision warning: The device alerts you when it
detects that you are not maintaining a safe distance between
your vehicle and the vehicle in front of you (Forward Collision
Warning System, page 4).
Lane departure warning: The device alerts you when it detects
you may be crossing a lane boundary unintentionally (Lane
Departure Warning System, page 4).
Go alert: The device plays a tone and displays an alert when
stopped traffic starts moving.
Enabling or Disabling Audible Driver Alerts
You can turn off individual audible driver alerts. The visual alert
appears even when the audible alert is disabled.
1
Select Settings > Map & Vehicle > Audible Driver Alerts.
2
Select or clear the check box next to each alert.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product
models.
Information about red light and speed camera locations is
available in some areas for some product models. Go to
garmin.com/speedcameras to check availability and
compatibility, or to purchase a subscription or one-time update.
You can purchase a new region or extend an existing
subscription at any time.
You can go to mygarmin.com to update the camera database on
your device. You should update your device frequently to
receive the most up-to-date camera information.
For some devices and regions, basic red light or speed camera
data may be included with your device. Included data does not
include updates or a subscription.
Advanced Driving Assistance System
Your device includes an advanced driving assistance system
(ADAS), which uses the integrated dash camera to provide
warnings and alerts about your driving environment.
Enabling or Disabling Advanced Driving Assistance
Features
You can enable or disable advanced driving assistance features
in the camera settings (Camera Settings, page 18).
1
Select Settings > Camera.
2
Select or clear the check box next to each warning or alert.
Go Alert
The Go alert plays a tone and displays an alert when stopped
traffic starts moving. This alert appears only after the vehicle
ahead has moved a substantial distance and your vehicle has
remained stopped. This can be useful at stop lights or in traffic
delays. This feature uses the dash camera to detect the stopped
or moving vehicle and requires a clear view of the road.
Forward Collision Warning System
WARNING
The forward collision warning system (FCWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
FCWS relies on the camera to provide a warning of upcoming
vehicles and, as a result, may have limited functionality in low
visibility conditions.
NOTE: This feature is not available in all areas or for all product
models.
The FCWS feature alerts you when the device detects that you
are not maintaining a safe distance between your vehicle and
the vehicle in front of you. The device determines your vehicle
speed using GPS, and it calculates an estimated safe following
distance based on your speed. The FCWS activates
automatically when your vehicle speed exceeds 48 km/hr
(30 mph).
When the device detects that you are too close to the vehicle
ahead of you, the device plays an audible alert, and a warning
appears on the screen.
Forward Collision Warning System Performance Tips
Several factors affect the performance of the forward collision
warning system (FCWS). Some conditions may prevent the
FCWS feature from detecting a vehicle ahead of you.
• The FCWS feature activates only when your vehicle speed
exceeds 48 km/h (30 mph).
• The FCWS feature may not detect a vehicle ahead of you
when the camera's view of the vehicle is obscured by rain,
fog, snow, sun or headlight glare, or darkness.
• The FCWS feature may not function properly if the camera is
incorrectly aligned (Aligning the Camera, page 3).
• The FCWS feature may not detect vehicles greater than 40 m
(130 ft.) away or closer than 5 m (16 ft.).
Lane Departure Warning System
WARNING
The lane departure warning system (LDWS) feature is for
information only and does not replace your responsibility to
observe all road and driving conditions, abide by all traffic
regulations, and use safe driving judgment at all times. The
LDWS relies on the camera to provide warnings for lane
markers and, as a result, may have limited functionality in low
visibility conditions.
The LDWS feature alerts you when the device detects you may
be crossing a lane boundary unintentionally. For example, the
device alerts you if you cross some solid painted lane
boundaries or cross into an incoming traffic lane. The LDWS
feature provides alerts only when your vehicle speed exceeds
4 Driver Awareness Features and Alerts
64 km/h (40 mph). The alert appears on the left or right side of
the screen to indicate which lane boundary you crossed.
NOTE: For the best LDWS performance, you should set the
Camera Placement option to indicate the location of your device
in the vehicle.
Setting the Camera Placement
You can mount the device in the left, center, or right of your
windshield or dash. For the best LDWS performance, you
should set the Camera Placement option to indicate the location
of your device in the vehicle.
1
Select Settings > Camera > Camera Placement.
2
Select the location of the device.
Lane Departure Warning Performance Tips
Several factors affect the performance of the lane departure
warning system (LDWS). Some conditions may prevent the
LDWS feature from detecting lane departures.
• The LDWS feature provides alerts only when your vehicle
speed exceeds 64 km/h (40 mph).
• The LDWS feature does not provide alerts on certain types of
roads, such as highway ramps or merging lanes.
• The LDWS feature may not function properly if the camera is
incorrectly aligned (Aligning the Camera, page 3).
• The LDWS feature may not function properly if the Camera
Placement option does not correctly indicate the placement
of your device in the vehicle.
• The LDWS feature requires a clear, continuous view of the
lane divider lines.
◦ Lane departures may not be detected when divider lines
are obscured by rain, fog, snow, extreme shadows, sun or
headlight glare, road construction, or any other visual
obstruction.
◦ Lane departures may not be detected if lane divider lines
are misaligned, missing, or heavily worn.
• The LDWS feature may not detect lane departures on
extremely wide, narrow, or winding roads.
Navigating to Your Destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode (Changing the Route Calculation
Mode, page 6) and avoidances (Avoiding Delays, Tolls,
and Areas, page 7).
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternate route
(Starting a Route, page 5).
• If there are specific roads you need to use or avoid, you can
customize the route (Shaping Your Route, page 6).
• You can add multiple destinations to a route (Adding a
Location to Your Route, page 6).
Starting a Route
1
Select Where To?, and search for a location (Finding and
Saving Locations, page 8).
2
Select a location.
3
Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.
• To edit the course of the route, select > Edit Route, and
add shaping points to the route (Shaping Your Route,
page 6).
The device calculates a route to the location and guides you
using voice prompts and information on the map (Your Route on
the Map, page 5). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route (Adding a Location to Your Route,
page 6).
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1
Select View Map.
2
Drag and zoom the map to display the area to search.
3
If necessary, select to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4
Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5
Select Go!.
Going Home
The first time you start a route home, the device prompts you to
enter your home location.
1
Select Where To? > Go Home.
2
If necessary, enter your home location.
Editing Your Home Location
1
Select Where To? > > Set Home Location.
2
Enter your home location.
Your Route on the Map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
À
Next action in the route. Indicates the next turn, exit, or other action
and the lane in which you should travel, if available.
Á
Distance to the next action.
Navigating to Your Destination 5
Â
Name of the street or exit associated with the next action.
Ã
Route highlighted on the map.
Ä
Next action in the route. Arrows on the map indicate the location of
upcoming actions.
Å
Vehicle speed.
Æ
Name of the road on which you are traveling.
Ç
Estimated arrival time.
TIP: You can touch this field to change the information it shows
(Changing the Map Data Field, page 12).
Active Lane Guidance
As you approach a turn while navigating a route, a detailed
simulation of the road appears beside the map, if available. A
colored line
À
indicates the proper lane for the turn.
Viewing Turns and Directions
While navigating a route, you can view upcoming turns, lane
changes, or other directions for your route.
1
From the map, select an option:
• To view upcoming turns and directions as you navigate,
select > Turns.
The map tool displays the next four turns or directions
beside the map. The list updates automatically as you
navigate the route.
• To view the complete list of turns and directions for the
entire route, select the text bar at the top of the map.
2
Select a turn or direction (optional).
Detailed information appears. An image of the junction may
appear for junctions on major roadways, if available.
Viewing the Entire Route on the Map
1
While navigating a route, select anywhere on the map.
2
Select .
Destination Arrival with Garmin Real Vision
™
Assistance
The Garmin Real Vision feature automatically displays a camera
view when approaching some destinations, including addresses
and geographic coordinates. The location of your destination
appears on an image of your surroundings captured by the dash
camera.
Some conditions may prevent this feature from appearing.
• This feature is not available in all areas or for all types of
destinations.
• This feature may not appear for destinations far from the
route or road, close to a turn or maneuver, or located on a
very curvy or hilly road.
• This feature may not appear when the road or destination is
obscured by weather, vegetation, or other obstructions.
• This feature may not appear in very bright or dark
environments.
Adding a Location to Your Route
Before you can add a location to your route, you must be
navigating a route (Starting a Route, page 5).
You can add locations to the middle or end of your route. For
example, you can add a fuel station as the next destination in
your route.
TIP: To create complex routes with multiple destinations or
scheduled stops, you can use the trip planner to plan, schedule,
and save a trip (Planning a Trip, page 7).
1
From the map, select > Where To?.
2
Search for a location (Finding and Saving Locations,
page 8).
3
Select a location.
4
Select Go!.
5
Select an option:
• To add the location as the next destination in your route,
select Add As Next Stop.
• To add the location to the end of your route, select Add
As Last Stop.
• To add the location and edit the order of destinations in
your route, select Add to Active Route.
The device re-calculates the route to include the added location
and guides you to the destinations in order.
Shaping Your Route
Before you can shape your route, you must start a route
(Starting a Route, page 5).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a destination to the route.
1
Touch anywhere on the map.
2
Select .
The device enters route shaping mode.
3
Select a location on the map.
TIP: You can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
4
If necessary, select an option:
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select .
5
When you are finished shaping the route, select Go!.
Taking a Detour
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1
From the map, select > Change Route.
TIP: If the Change Route tool is not in the map tools menu,
you can add it (Enabling Map Tools, page 11).
2
Select an option:
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
• To find a new route, select Detour.
Stopping the Route
From the map, select > Stop.
Changing the Route Calculation Mode
1
Select Settings > Navigation > Calculation Mode.
6 Navigating to Your Destination
2
Select an option:
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Off Road to calculate point-to-point routes (without
roads).
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
Trip Planner
You can use the trip planner to create and save a trip, which you
can navigate later. This can be useful for planning a delivery
route, a vacation, or a road trip. You can edit a saved trip to
further customize it, including reordering locations, optimizing
the order of stops, adding scheduling information, and adding
shaping points.
You can also use the trip planner to edit and save your active
route.
Planning a Trip
A trip can include many destinations, and it must include at least
a starting location and one destination. The starting location is
the location from which you plan to start your trip. If you start
navigating the trip from a different location, the device gives you
the option to route to your starting location first. For a round trip,
the starting location and final destination can be the same.
1
Select Apps > Trip Planner > > Create Trip.
2
Select Select Start Location.
3
Choose a location for your starting point, and select Select.
4
Select Select Destination.
5
Choose a location for a destination, and select Select.
6
Select Add Location to add more locations (optional).
7
After you have added all the necessary locations, select Next
> Save.
8
Enter a name, and select Done.
Navigating to a Saved Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select Go!.
4
Select the first location to navigate to, and select Start.
The device calculates a route from your current location to
the selected location and then guides you to the remaining
trip destinations in order.
Optimizing the Order of Destinations in a Trip
The device can automatically optimize the order of destinations
in your trip to create a shorter, more efficient route. The starting
location and final destination are not changed when you
optimize the order.
While editing a trip, select > Optimize Order.
Editing and Reordering Locations in a Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select a location.
4
Select an option:
• To move the location up or down, select , and drag the
location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Editing and Saving Your Active Route
If a route is active, you can use the trip planner to edit and save
your route as a trip.
1
Select Apps > Trip Planner > My Active Route.
2
Edit your route using any of the trip planner features.
The route recalculates each time you make a change.
3
Select Save to save your route as a trip, which you can
navigate again later (optional).
Changing Routing Options for a Trip
You can customize how the device calculates the route when
you start your trip.
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select > Trip Settings.
4
Select an option:
• To add shaping points to your trip, select Shape Route,
and follow the on-screen instructions (Shaping Your
Route, page 6).
• To change the calculation mode for the trip, select Route
Preference (Changing the Route Calculation Mode,
page 6).
Scheduling a Trip
You can add scheduling information to each location in your trip,
including the desired arrival time and layover duration at each
location. This can help you plan your departure to reach
locations in your trip on time.
1
Select Apps > Trip Planner.
2
Select a trip.
3
Select > Trip Settings > Edit Schedule.
4
Select a location, and follow the on-screen instructions to
enter the schedule information.
TIP: If you need to schedule multiple locations in the trip, you
should start from the beginning of the trip and work toward
the end.
5
Repeat step 4 to enter schedule information for additional
locations.
6
When finished, select Save.
When you navigate the trip, you should depart by the time
shown under the starting point to reach your stops and
destinations by the scheduled time. The schedule is an estimate
only. Traffic conditions, construction, and other delays may
affect your actual arrival times.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (Device and
Privacy Settings, page 19).
Using the myTrends
™
feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
Avoiding Delays, Tolls, and Areas
Avoiding Traffic Delays on Your Route
Before you can avoid traffic delays, you must be receiving traffic
information (Receiving Traffic Data Using a Traffic Receiver,
page 12).
By default, the device optimizes your route to avoid traffic delays
automatically. If you have disabled this option in the traffic
settings (Traffic Settings, page 19), you can view and avoid
traffic delays manually.
Navigating to Your Destination 7
3 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Garmin-DriveAssist-50LMT

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin DriveAssist 50LMT bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin DriveAssist 50LMT in de taal/talen: Engels als bijlage per email.

De handleiding is 3,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Garmin DriveAssist 50LMT

Garmin DriveAssist 50LMT Gebruiksaanwijzing - Nederlands - 32 pagina's

Garmin DriveAssist 50LMT Gebruiksaanwijzing - Deutsch - 32 pagina's

Garmin DriveAssist 50LMT Gebruiksaanwijzing - Français - 32 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info