Handleiding Garmin Camper RV 780 (pagina 14 van 30) (Engels)

691038

Verklein

Vergroot

Pagina terug

1/30

Pagina verder

Avoiding Delays, Tolls and Areas

Avoiding traffic delays on your route

Before you can avoid traffic delays, you must be receiving traffic

information (Receiving traffic data using your smartphone,

page 14).

By default, the device optimises your route to avoid traffic delays

automatically. If you have disabled this option in the traffic

settings (Traffic Settings, page 19), you can view and avoid

traffic delays manually.

While navigating a route, select > Traffic.

Select Alternative Route, if available.

Select Go!.

Avoiding toll roads

Your device can avoid routing you through areas that require

tolls, such as toll roads, toll bridges, or congestion areas. The

device may still include a toll area in your route if no other

reasonable routes are available.

Select Settings > Navigation.

Select an option:

NOTE: the menu changes based on your area and the map

data on your device.

• Select Toll Roads.

• Select Tolls and Fees > Toll Roads.

Select an option:

• To be asked each time before routing through a toll area,

select Always Ask.

• To always avoid tolls, select Avoid.

• To always allow tolls, select Allow.

Select Save.

Avoiding toll stickers

If the map data on your device contains detailed toll sticker

information, you can avoid or allow roads that require toll

stickers for each country.

NOTE: this feature is not available in all areas.

Select Settings > Navigation > Tolls and Fees > Toll

Stickers.

Select a country.

Select an option:

• To be asked each time before routing through an area that

requires toll stickers, select Always Ask.

• To always avoid roads that require toll stickers, select

Avoid.

• To always allow roads that require toll stickers, select

Allow.

Select Save.

Avoiding road features

Select Settings > Navigation > Avoidances.

Select the road features to avoid on your routes, and select

OK.

Avoiding environmental zones

Your device can avoid areas with environmental or emissions

restrictions that may apply to your vehicle. This option applies to

the vehicle type in the active vehicle profile.

Select Settings > Navigation > Environmental Zones.

Select an option:

• To be asked each time before routing through an

environmental zone, select Always Ask.

• To always avoid environmental zones, select Avoid.

• To always allow environmental zones, select Allow.

Select Save.

Custom avoidances

Custom avoidances allow you select specific areas or sections

of road to avoid. When the device calculates a route, it avoids

these areas and roads unless no other reasonable route is

available.

Avoiding a road

Select Settings > Navigation > Custom Avoidances.

If necessary, select Add Avoidance.

Select Add Avoid Road.

Select the starting point of the section of road to avoid and

select Next.

Select the ending point of the road section and select Next.

Select Done.

Avoiding an area

Select Settings > Navigation > Custom Avoidances.

If necessary, select Add Avoidance.

Select Add Avoid Area.

Select the upper left corner of the area to avoid and select

Next.

Select the lower right corner of the area to avoid and select

Next.

The selected area is shaded on the map.

Select Done.

Disabling a custom avoidance

You can disable a custom avoidance without deleting it.

Select Settings > Navigation > Custom Avoidances.

Select a created avoidance.

Select > Disable.

Deleting custom avoidances

Select Settings > Navigation > Custom Avoidances.

Select an option:

• To delete all custom avoidances, select .

• To delete one custom avoidance, select the avoidance

and select > Delete.

Navigating off road

If you are not following roadways as you navigate, you can use

Off Road mode.

Select Settings > Navigation.

Select Calculation Mode > Off Road > Save.

The next route will be calculated as a straight line to the

location.

Using the Map

You can use the map to navigate a route (Your route on the

map, page 8) or to view a map of your surroundings when no

route is active.

Select View Map.

Touch anywhere on the map.

Select an option:

• Drag the map to pan left, right, up, or down.

• To zoom in or out, select or .

• To switch between North Up and 3-D views, select .

• To filter the displayed points of interest by category, select

• To start a route, select a location on the map, and select

Go! (Starting a route by using the map, page 8).

10 Using the Map

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Garmin Camper RV 780 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Garmin Camper RV 780

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info