629013
9
Verklein
Vergroot
Pagina terug
1/10
Pagina verder
Alignment: Displays the
babyCam video to help you align the
camera.
Check Seat Reminder: Enables a reminder to check for rear
seat passengers before exiting the vehicle.
Unpair: Removes the paired camera.
Rename: Allows you to rename the paired camera.
Flipping and Mirroring the Video
Depending on the camera orientation, the video on your
navigation device may appear upside down or mirrored by
default. You can flip the video vertically or mirror the video
horizontally to correct the video.
1
Select Settings > babyCam.
2
Select a camera from the list.
3
Select
Flip Video, and select an option.
Check Seat Reminder
The check seat reminder plays a tone and displays a message
to remind you to check your vehicle for passengers before
exiting. If you viewed the
babyCam video during your drive, the
most recent image from the camera also appears.
Device Maintenance
Updating the Camera Software
When you update your navigation device, the latest camera
software is included in the update. The next time you connect
your navigation device to the receiver cable, it updates your
camera software wirelessly when a camera software update is
available.
1
Update your navigation device to the latest software.
Go to garmin.com/express or see your navigation device
owner's manual for information about updating your
navigation device.
2
Verify the camera batteries are installed or the camera is
connected to external power.
3
Connect the updated navigation device to the receiver cable,
and plug the receiver cable into an active vehicle power
outlet.
If a camera update is available, the navigation device sends the
update to your camera, and a progress indicator appears on the
navigation device.
Cleaning the Device
NOTICE
Do not use a dry cloth to clean the lens. Use of a dry cloth may
damage the lens.
Avoid chemical cleaners and solvents that can damage plastic
components.
1
Wipe the outer casing and lens with a soft, non-scratch cloth
dampened with water or alcohol.
2
Wipe the outer casing dry, and allow the lens to air dry.
Device Information
Specifications
Camera input voltage From 4.75 to 5.25 Vdc
Battery type Two AA batteries (NiMH, alkaline, or
lithium)
Camera temperature range From -20° to 70°C (from -4° to 158°F)
Receiver cable temperature
range
From -20° to 70°C (from -4° to 158°F)
Receiver cable input voltage From 10 to 24 V
Receiver cable fuse 2 A, 250 V fast-blow
Troubleshooting
My navigation device does not show video
from my camera
Replace the batteries in the camera (Installing AA Batteries,
page 1)
.
Manually pair the camera and receiver cable (Pairing a
Garmin babyCam
Camera with the Receiver Cable, page
4)
.
If you are using the optional vehicle power cable, verify the
vehicle power outlet is providing power.
The LED on the vehicle power cable plug illuminates when it
is receiving power.
My camera does not stay in position
Verify the knob, thumbscrews, and threaded ring are fully
tightened.
Verify the thumbscrew that secures the joint between the
mount and the camera is installed in the correct direction, as
shown in the installation illustrations.
When it is installed correctly, the thumbscrew grip is on the
opposite side of the mount from the threaded hole.
When should I replace the batteries?
The batteries can last 3 to 12 months with daily use. The battery
life depends on several factors, including the power setting
(
babyCam Settings, page 4)
, the type of batteries used, and the
ambient temperature.
A low battery power alert appears on your navigation device
when the camera batteries are low. You can also use these
options to verify manually whether the batteries are providing
power.
Check the batteries using an external battery tester.
Remove the batteries from the camera, wait several seconds,
and reinstall them in the camera.
The red power LED illuminates for about two seconds if the
camera receives adequate power from the batteries. If the
LED does not illuminate, or if it turns off in less than one
second, you should change the batteries.
I cannot tell whether the camera is on or off
The device is on while it is receiving power from either the
batteries or the optional vehicle power cable accessory. You
cannot turn off the device.
To conserve power, the power LED on the device is not
illuminated during normal use.
When you install batteries or connect the vehicle power
cable, the red power LED illuminates briefly to indicate the
camera is receiving power.
Device Maintenance 5
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Garmin BabyCam bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Garmin BabyCam in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Garmin BabyCam

Garmin BabyCam Gebruiksaanwijzing - Nederlands - 12 pagina's

Garmin BabyCam Gebruiksaanwijzing - Deutsch - 12 pagina's

Garmin BabyCam Gebruiksaanwijzing - Français - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info