724682
5
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
3
AFTER SALES SUPPORT
Tel.: 1800 909 909
www.globalpowerbrands.com email: help@globalpowerbrands.com
KSI 2200
AUS
instructions to operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may a ect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cut-
ting tools with sharp cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the
power tool for operations di erent from those intended could result
in a hazardous situation.
5) Service
a) Have your power tool serviced by a quali ed repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
6) Emissions
- The speci ed vibration emission value was measured by
a standardised test methods and can compare with other
power tools are used.
- The speci ed vibration emission value can also be neces-
sary for the assessment of work breaks are used.
- The speci ed vibration emission value can vary during the
actual use of the electric tool by specifying the value, de-
pending on the way how to use the power tool.
- Note: You create the privilege against vascular pulsations of
the hands in time breaks
7) Chainsaw safty warnings:
Keep all parts of the body away from the saw chain when the
chain saw is operating. Before you start the chain saw, make
sure the saw chain is not contacting anything. A moment of
inattention while operating chain saws may cause entangle-
ment of your clothing or body with the saw chain.
Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chain saw with a reversed hand con guration increases the risk of
personal injury and should never be done.
Hold the electric equipment by its insulated handle surfaces,
as the chainsaw can come into contact with its own mains
power cable. If the chainsaw comes into contact with a live cable,
it can energise metal parts of the equipment and cause an electric
shock.
Wear safety glasses and hearing protection. Further protec-
tive equipment for head, hands, legs and feet is recommend-
ed. Adequate protective clothing will reduce personal injury by  ying
debris or accidental contact with the saw chain.
Do not operate a chain saw in a tree. Operation of a chain saw
while up in a tree may result in personal injury.
Always keep proper footing and operate the chain saw only
when standing on  xed, secure and level surface. Slippery or
unstable surfaces such as ladders may cause a loss of balance or
control of the chain saw.
When cutting a limb that is under tension be alert for spring
back. When the tension in the wood  bres is released the spring
loaded limb may strike the operator and/or throw the chain saw out
of control.
Use extreme caution when cutting brush and saplings. The
slender material may catch the saw chain and be whipped toward
you or pull you o balance.
Carry the chain saw by the front handle with the chain saw
switched o and away from your body. When transporting
or storing the chain saw always  t the guide bar cover. Proper
handling of the chain saw will reduce the likelihood of accidental
contact with the moving saw chain.
Follow instructions for lubricating, chain tensioning and
changing accessories. Improperly tensioned or lubricated chain
may either break or increase the chance for kickback.
Keep handles dry, clean, and free from oil and grease. Greasy,
oily handles are slippery causing loss of control.
Cut wood only. Do not use chain saw for purposes not in-
tended. For example: do not use chain saw for cutting plastic,
masonry or non-wood building materials. Use of the chain saw
for operations di erent than intended could result in a hazardous
situation.
8) Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide bar touches
an object, or when the wood closes in and pinches the saw chain in
the cut.
Tip contact in some cases may cause a sudden reverse reaction, kick-
ing the guide bar up and back towards the operator.
Pinching the saw chain along the top of the guide bar may push the
guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose control of the saw
which could result in serious personal injury. Do not rely exclusively
upon the safety devices built into your saw. As a chain saw user,
you should take several steps to keep your cutting jobs free from
accident or injury.
Kickback is the result of tool misuse and/or incorrect operating pro-
cedures or conditions and can be avoided by taking proper precau-
tions as given below:
Maintain a  rm grip, with thumbs and  ngers encircling the
chain saw handles, with both hands on the saw and position
your body and arm to allow you to resist kickback forces. Kick-
back forces can be controlled by the operator, if proper precautions
are taken. Do not let go of the chain saw.
Do not overreach and do not cut above shoulder height. This
helps prevent unintended tip contact and enables better control of
the chain saw in unexpected situations.
Only use replacement bars and chains speci ed by the manu-
facturer. Incorrect replacement bars and chains may cause chain
breakage and/or kickback.
Follow the manufacturer’s sharpening and maintenance in-
structions for the saw chain. Decreasing the depth gauge height
can lead to increased kickback.
Set the loop so that it is not detected during operation of
branches or the like.
9) Important instructions for your personal safety
a) General safety instructions
1. Children and young persons under 18 may not operate electrical
chainsaws, with the exception of apprentices older than 16 under
the supervision of a trained adult.
2. The chainsaw may only be used by persons who have su cient
experience.
3. Always keep these Operating Instructions together with the
chainsaw.
4. Only lend or give this chainsaw to persons who are familiar with
its use. Also give them these Operating Instructions.
B) Instructions on using the chainsaw safely
5. Attention! Read the Operating Instructions carefully and have
yourself instructed in the use of a chainsaw before you use it for
the  rst time.
6. Always store your electric tools in a safe place. Electric tools not
being used should be stored in a dry, inaccessible or locked place,
outside the reach of children.
7. Check the extension cable regularly and replace it if it gets worn
or damaged.
8. Check the power cable for damage or cracks every time before
you use it. Damaged cables must be replaced.
9. Always hold the chainsaw with both hands while working with it.
10. The chainsaw must be disconnected from the power supply be-
fore you tighten the chain, exchange the chain or carry out any
other work on the saw. - Withdraw the plug!
11. During work breaks put the machine down in such a manner that
nobody is at risk.
12. When switching on the chainsaw, ensure that it is supported well
and hold it  rmly. The chain and bar must be free.
13. Withdraw the plug immediately if the power cable is damaged or
cut.
14. The chainsaw may only be connected to socket outlets with
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardenline KSI-2200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardenline KSI-2200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,68 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info