782039
31
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
Re-tension the chain, if this is necessary.
1. THIS CHAINSAW IS SUPPLIED READY ASSEMBLED.
Remove the chain guard (16) before use.
2. IF IT IS NECESSARY TO RE-TENSION THE CHAIN
Adjusting the chain tension
The correct tension of the saw chain is extremely important and must be checked
before starting and periodically during all sawing work. If you take time to adjust the
saw chain correctly, you will be able to make better cuts and the life of the chain will be
prolonged.
Undo the bar fastening wheel (Fig. 9/pos. 18) by 1/2 of a turn COUNTERCLOCK-
WISE.
Hold the tip of the chain bar upwards and turn the chain tensioning wheel (Fig. 9/pos.
3) IN A CLOCKWISE DIRECTION in order to increase the chain tension. If you turn
the chain tensioning wheel IN A COUNTER-CLOCKWISE DIRECTION, the chain
tension will be reduced. Check that the chain is seated around the entire chain bar
(Fig. 4/pos. X3).
After making the adjustment and with the tip of the bar still upwards, tighten the bar
fastening wheel (Fig. 9/pos. 18). The chain is correctly tensioned when it is closely
seated and can be pulled right around by hand, when the chain brake (5) is released.
m WARNING
Wear high-strength gloves at all times when handling or adjusting the saw chain.
m If the chain is hard to turn around the chain bar or jammed, it is too tightly tensioned.
Make the following small adjustments:
A Undo the bar fastening wheel (Fig. 9/pos. 18) by 1/2 of a turn COUNTERCLOCK-
WISE. Then slacken the chain tension by slowly turning the chain tensioning wheel
(Fig. 9/pos. 3) IN A COUNTER-CLOCKWISE DIRECTION and then pull the chain
back and forth on the bar (Fig. 30). Continue until the chain can be moved smoothly
but is still closely seated (Fig. 4/pos. X2). Increase the tension by turning the chain
tensioning wheel IN A CLOCKWISE DIRECTION.
B When the saw chain is correctly tensioned, hold the tip of the bar upwards and
completely tighten the bar fastening wheel (Fig. 9/pos. 18).
AFTER SALES SUPPORT 35
00800 4003 4003 aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Set up
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardenline CSP41 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardenline CSP41 in de taal/talen: Engels als bijlage per email.

De handleiding is 6.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info