782039
25
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
The working environment around the tree should be cleared so you have secure
footing.
The machine operator should always be positioned at a higher level in the
working area because the tree will probably roll or slide down after felling.
The following conditions can inuence the tree‘s falling direction:
Wind direction and speed
Leaning of the tree - The leaning direction cannot always be recognised
because of uneven or sloping ground. Determine the leaning direction of the
tree using a plumb line or a level.
Branches growing (and therefore weight) only on one side
Surrounding trees or obstacles
Look out for destroyed or decayed parts of the tree. If the trunk is decayed, it
can suddenly break and fall on you. Make sure there is sufcient space for the
falling tree. Keep a distance of 2½ tree lengths to the next person or other objects.
The sound of the motor can drown out warning cries.
Remove dirt, stones, loose bark, nails, brackets and wire from the sawing area.
m Ensure you have a free escape route (Fig. A)
Position 1: Escape route
Position 2: Falling direction of the tree
Felling of large trees (from 15cm diameter) - only with relevant training
The undercutting method is used for felling large trees. For this, a wedge is cut out
from the side of the tree according to the required falling direction. After the
dropping cut has been made on the other side of the tree, it will fall in the direction of
the wedge cut.
m NOTICE
If the tree has large prop/buttress roots, these should be removed before the wedge
is cut. If the saw is used for removing the prop/buttress roots, the saw-chain should
not touch the ground so the chain does not become blunt.
Undercut and felling the tree (Fig. B-C)
For the undercut, rst cut the upper part (Pos. 1) of the wedge (Pos. 2). Cut 1/3
of the way into the tree. Then saw the lower part (Pos. 3) of the wedge (Pos. 2).
AFTER SALES SUPPORT 29
00800 4003 4003 aldi.service.uk@scheppach.com
MODEL: CSP41 PRODUCT CODE: 64055 04/2017
Petrol chainsaw 41cc Safety regulations
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardenline CSP41 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardenline CSP41 in de taal/talen: Engels als bijlage per email.

De handleiding is 6.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info