2. Push the ON/OFF button for 3 seconds and make
sure the product is switched off. Check that the
indicator lamp on the keypad is not lit. This means
that the product is disabled. Refer to
Indicator lamp
in the charging station on page 44
.
3. Carry the product by the handle with the blade disc
away from the body.
2.3.4 Maintenance
WARNING: Set the product to OFF
before you do maintenance on the product.
The product is disabled when the LED
indicator on the keypad of the product goes
out.
WARNING: Disconnect the power
supply to the charging station before you
clean or do maintenance of the charging
station or the loop wire.
CAUTION: Do not use a high-pressure
washer to clean the product. Do not use
solvents to clean the product.
Examine the product each week and replace damaged
or worn parts. Refer to
Maintenance on page 34
.
2.3.5 In the event of a thunderstorm
To reduce the risk of damage to electrical components
in the product and the charging station, we recommend
that all connections to the charging station are
disconnected (power supply, boundary wire and guide
wire) if there is a risk of a thunderstorm.
1. Mark the wires to simplify reconnecting. The
charging station’s connections are marked R, L
and GUIDE.
2. Disconnect all connected wires and the power
supply.
3. Connect all the wires and the power supply if there
is no longer a risk of thunder. It is important that
each wire is connected to the right place.
1298 - 015 - 20.08.2021 Safety - 13
