687465
47
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
6.4 Indicator lamp in the charging station
For a fully functional installation, the indicator lamp in the charging station must emit a solid or flashing green light. If
something else appears, follow the troubleshooting guide below.
There is more help on www.gardena.com. If you still need help, please contact your local GARDENA representative.
Light Cause Action
Solid green light
Good signals No action required
Green flashing light
The signals are good and
ECO mode
is acti-
vated.
No action required. For more information on
ECO mode
, see
Settings on page 29
.
Blue flashing light
The boundary loop is not connected to the
charging station.
Check that the boundary wire connectors are
fitted properly to the charging station. See
Connecting the boundary wire on page 18
.
Break in the boundary loop. Find out where the break is. Replace the
damaged section of the loop with a new loop
wire and splice using an original coupler.
Red flashing light
Interruption in the charging station’s antenna. Contact your local GARDENA representative.
Solid red light
Fault in the circuit board or incorrect power
supply in the charging station. The fault
should be rectified by an authorized service
technician.
Contact your local GARDENA representative.
6.5 Symptoms
If your robotic lawnmower does not work as expected, follow the symptoms guide below.
There is a FAQ (Frequently Asked Questions) on www.gardena.com which provides more detailed answers to a
number of standard questions. Contact your local GARDENA representative if you still cannot find the reason for the
fault.
Symptoms Cause Action
The robotic lawnmow-
er has difficulty dock-
ing.
The boundary wire is not laid in a long
straight line that is far enough out from the
charging station.
Check that the charging station has been in-
stalled according to the instructions in
Laying
the boundary wire in towards the charging
station on page 17
The guide wire is not inserted in the slot un-
der the charging station.
It is absolutely critical for operation that the
guide wire is perfectly straight and is in the
correct position under the charging station.
Therefore make sure that the guide wire is al-
ways in its slot in the charging station. See
Laying and connecting the guide wire on
page 19
.
The charging station is on a slope. Place the charging station on a surface that is
entirely level. See
Best charging station loca-
tion on page 11
.
The robotic lawnmow-
er runs at the wrong
time
The robotic lawnmower clock needs to be set. Set the clock. See
Time & Date on page 29
.
The start and stop times for mowing are in-
correct.
Reset the start time and stop time settings for
mowing. See
Timer on page 22
.
The robotic lawnmow-
er vibrates.
Damaged blades lead to imbalance in the
cutting system.
Inspect the blades and screws and replace
them if necessary. See
To replace the blades
on page 41
.
Too many blades in the same position lead to
imbalance in the cutting system.
Check that only one blade is fitted at each
screw.
Different versions (thickness) of GARDENA
blades are used.
Check if the blades are of different versions.
307 - 002 - 11.10.2017 Troubleshooting - 47
47

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gardena SILENO plus R160 Li-LiC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gardena SILENO plus R160 Li-LiC in de taal/talen: Engels als bijlage per email.

De handleiding is 7,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gardena SILENO plus R160 Li-LiC

Gardena SILENO plus R160 Li-LiC Gebruiksaanwijzing - Nederlands - 56 pagina's

Gardena SILENO plus R160 Li-LiC Gebruiksaanwijzing - Deutsch - 56 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info