1.1 For your safety
You must not operate the appliance if it is
damaged.
The appliance must only be connected by an
authorised specialist, paying attention to the
relevant regulations of the power supply companies
and the regional construction regulations.
Observe the assembly instructions!
When connecting electrical appliances and
devices in the proximity of cooking surfaces and
ovens, make sure that connecting cables do not
become jammed under the hot oven door or come
into contact with hot cooking surfaces.
As the user, you yourself are responsible for
maintenance and proper use in the household.
Only ever operate the appliance under
supervision.
Caution: fire risk! Do not store any combustible
items in your oven. During operation, only leave the
parts in the cooking compartment that you actually
need.
Caution ! The appliance and, until the cooling fan
is switched on, also the control panel get hot during
operation. Keep children away !
Note: to avoid jeopardising the electrical safety of
the appliance, it is forbidden to use high-pressure
or steam jet cleaning devices.
The appliance must be isolated from the mains
during all maintenance. To this end, remove the
mains plug or actuate the corresponding fuse.
Repairs may only be carried out by authorised
electricians, in order to guarantee the safety of the
appliance.
No warranty claims can be lodged for any
damage resulting from failure to observe these
instructions.
Technical modifications reserved.
1.2 Operating for the first time
Before operating the appliance for the first time,
please pay attention to the following notes:
Read through these instructions attentively before
operating your appliance for the first time.
The appliance must be installed and connected by
a specialist.
Remove the packaging from the appliance and
dispose of it properly.
Pay attention to the fact that there are accessories
in the base of the packaging.
Keep packaging material away from children.
Before using the oven for the first time, remove
all removable interior parts (gridiron,
tray ...). Now operate the oven for one hour at
300 °C in the hot air mode. During this time, pay
attention to ensuring that the room is ventilated
well, thus removing any newness smells.
Thoroughly clean the appliance and accessories
before using them for the first time. (see chapter
entitled “Cleaning and care”).
After first installation or a power failure, the
symbol (Door lock) flashes in the display. Please
do not open the oven door! Then, 08:00 and the
time unit symbol flash in the display. You can set the
current time by pressing the + and – keys. When
you turn one of the control knobs or press a key, the
displayed time of day is set as the current time of
day.
Before operating the appliance for the first time,
make sure that the mains connection is in proper
working order.
The rating plate for this appliance is visible when
you open the appliance door. An additional rating
plate is included on a separate sheet of the
instructions. For warranty reasons, store this
rating plate in the same location as your operating
and assembly instructions.
1. Important notes
3
