33
Taking out the humidity filter
The humidity filter over the humidity container can be
taken out for cleaning. To do this, first take out
the humidity container and pull out the humidity filter.
Lift off the filter cover and take out the filter. Clean
in lukewarm water, leave to dry and re-assemble.
Installing extension rails
1. To remove the extension rails, bend slightly at the
front in the direction of the arrow.
2. Lift extension rail and detach from the mounting.
3. To install the extension rail, insert into the rear
opening.
4. Insert extension rail into the front opening and
engage downwards.
Tips for saving energy
▯ Install the appliance in a dry, well ventilated room!
The appliance should not be installed in direct
sunlight or near a heat source (e.g. radiator,
cooker).
If required, use an insulating plate.
▯ Allow warm food and drinks to cool down before
placing in the appliance!
▯ When thawing frozen products, place them
in the refrigerator. Use the coldness of the frozen
food to cool food.
▯ Open the appliance as briefly as possible.
▯ Regularly defrost the freezer compartment to
remove the layer of frost!
A layer of hoarfrost will impair refrigeration of
the frozen food and increase power consumption.
▯ Ensure that the freezer compartment door has
been closed properly.
▯ Occasionally clean the rear of the appliance
with a vacuum cleaner or paint brush to prevent
an increased power consumption.
Operating noises
Quite normal noises
Droning
Motors are running (e.g. refrigerating units, fan).
Bubbling, humming or gurgling noises
Refrigerant is flowing through the tubing.
Clicking
Motor, switches or solenoid valves are switching on/
off.
Preventing noises
The appliance is not level
Please align the appliance with a spirit level. If
required, place something underneath.
The appliance is not free-standing
Please move the appliance away from adjacent units
or appliances.
2
4
3
1
