25
Controls
Switching the appliance on
Switch on the appliance with the On/Off button 1 (see
appliance overview).
The temperature display 6 indicates the set
temperature. Displays 5 “cold+fresh” and “freezer”
come on.
The appliance starts to cool, the light is switched on
when the door is open.
We recommend a setting of +4 °C.
Perishable food should not be stored above +4 °C.
Operating tips
▯ After the appliance has been switched on, it may
take several hours until the set temperatures have
been reached.
Do not put any food in the appliance beforehand.
▯ The temperature in the freezer compartment
depends on the temperature in the refrigerator
compartment. Warmer refrigerator compartment
temperatures also cause warmer freezer
compartment temperatures.
▯ While the refrigeration unit is running, water
droplets or a thin layer of ice may form at the rear
panel of the refrigerator. This is nothing unusual.
It is not necessary to scrape off the frost or wipe
off the water droplets. The rear panel defrosts
automatically. The condensation flows into
the evaporation area of the appliance via
the condensation channels and the drainage hole.
▯ The partition in the lower “cool-fresh” container is
required for functional reasons and should not be
removed. The temperature behind the partition is
lower than in the front area of the container.
Setting the temperature
Freezer compartment
The temperature in the freezer compartment
depends on the temperature in the refrigerator
compartment.
Refrigerator compartment
The temperature can be set from +3 °C to +8 °C.
Keep pressing temperature setting button 3 until
the required refrigerator compartment temperature
is set. The value last selected is saved.
The set temperature is indicated on display 6.
Cool-fresh compartment
The temperature in the ”cool-fresh” compartment
Chas been set to almost 0 °C at the factory and
should not be changed if at all possible.
If frost forms on the refrigerated food, the temperature
can be increased (see chapter “Eliminating minor
faults yourself”).
1 On/Off button
Serves to switch the whole
appliance on and off.
2 Fast button
Switches fast freezing on and off.
3 Temperature selection button
The required temperature is set with this button.
4 Display fast freezing
Illuminates when fast freezing is on.
5 cold, fresh and freezer display
The displays are lit when the appliance is in
operation.
6 Temperature display refrigerator
compartment
▯ Indicates the set temperature
of the refrigerator compartment.
▯ Indicates “SU” when super freezing
is switched on.
