755839
11
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
10
en Familiarising yourself with your appliance
Accessories
Use only the accessories supplied with the product or
available from the after-sales service. They are specially
designed for your appliance. Ensure that you always
insert the accessories into the cooking compartment
the right way round.
Your appliance is equipped with the following
accessories:
Special accessories
You can order the following special accessories from
your specialist dealer:
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
The non-stick cooking containers must not be heated to
more than 230 °C. Use the non-stick cooking container
only in the combi-steam oven.
Wire rack
For cookware, cake tins
and ovenproof dishes, and
for roasts
Cooking container made
of stainless steel,
unperforated, 40mm
deep
For catching dripping
liquid when steaming and
for cooking rice, pulses
and cereals
Stainless steel cooking
container, perforated,
40 mm deep
For steaming vegetables or
fish, juicing berries and
defrosting
BA 220360 Stainless steel cooking insert,
unperforated, 40mm, 1.5l
BA 220370 Stainless steel cooking insert,
perforated, 40mm, 1.5l
BA 020380 Container, non-stick, unperforated,
40 mm deep, 5 l
BA 020390 Container, non-stick, perforated,
40 mm deep, 5 l
17002490 Set with four descaling tablets
GN 010330 GN adapter
(For use with GN cooking inserts)
GN 114130 Stainless steel cooking container
GN 1/3, perforated, 40 mm deep, 1.5 l
GN 114230 Stainless steel cooking container GN
2/3, unperforated, 40 mm deep, 3 l
GN 124130 Stainless steel cooking container GN
1/3, perforated, 40mm deep, 1.5l
GN 124230 Stainless steel cooking container
GN 2/3, perforated, 40 mm deep, 3 l
11
Before using for the first time en
K
Before using for the first time
Before using for the f i rst time
In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled ~ "Important
safety information" on page 4.
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30seconds. The "Initial settings"
menu will then appear automatically.
You can change the settings at any time in the basic
settings.
Setting the language
The preset language appears in the display.
1Turn the rotary selector to select the required
display language.
2Confirm with .
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1Use the rotary selector to select the desired format.
2Confirm with .
Setting the clock
The time is shown in the display.
1Set the desired time using the rotary selector.
2Confirm with .
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1Use the rotary selector to select the desired format.
2Confirm with .
Setting the date
The preset date appears in the display. The day setting
is already active.
1Set the day using the rotary selector.
2Touch the C symbol to switch to the month setting.
3Set the month using the rotary selector.
4Touch the C symbol to switch to the year setting.
5Set the year using the rotary selector.
6Confirm with .
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1Use the rotary selector to select the unit you
require.
2Confirm with .
Setting the water hardness
"Water hardness" appears in the display.
1Check the mains water with the included carbonate
hardness test: fill the small measurement tube with
mains water up to the 5 ml mark.
2Add drops of indicator solution until the color
changes from purple to yellow.
Important: count the drops and carefully swing the
measurement tube after every drop until the liquids
have mixed thoroughly. The number of drops
corresponds to the water hardness.
3Use the rotary selector to set the measured water
hardness. The value 12is set by default.
4Confirm with .
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with .
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Cleaning the door panel
The door seal has been greased in the factory to make it
leaktight. There may be traces of grease left on the door
panel.
Clean the door panel with glass cleaner and a window
cloth or microfibre cloth before using the appliance for
the first time. Do not use glass scrapers.
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gaggenau BSP221131 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gaggenau BSP221131 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Gaggenau BSP221131

Gaggenau BSP221131 Gebruiksaanwijzing - Nederlands - 44 pagina's

Gaggenau BSP221131 Gebruiksaanwijzing - Deutsch - 40 pagina's

Gaggenau BSP221131 Gebruiksaanwijzing - Français - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info