755830
29
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
28
en Home Connect
o
Home Connect
Home Connect
This appliance can be networked and controlled
remotely using a mobile device. The Home Connect app
offers extra functions that complement the networked
appliance perfectly. If the appliance is not connected to
your home network, it can be operated as usual via the
display.
The availability of the Home Connect function depends
on the availability of Home Connect services in your
country. Home Connect services are not available in
every country. You can find more information on this at
www.home-connect.com.
Notes
Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are
operating the appliance via the Home Connect app.
You must also follow the instructions in the Home
Connect app.
Operating the appliance directly from the appliance
always takes priority. It is not possible to operate
the appliance using the Home Connect app during
this time.
Refer to the Home Connect documents supplied for
more information.
Setting up
To configure settings via Home Connect, you will need
to have installed the Home Connect app on a mobile
device.
Your appliance will also need to be connected to your
home network and to the Home Connect app. You can
choose between the following connection types:
Connection via LAN cable: The appliance is
connected to the home network automatically
following confirmation on the appliance.
Connection via WLAN: Establish the connection to
your home network and then the connection to the
Home Connect app.
Note: The app will guide you through the entire
registration process. In case of doubt, follow the
instructions in the app.
Installing the app
Install the Home Connect app on your mobile device
(e.g. tablet PC or smartphone).
1On your mobile device, go to the App Store (Apple
devices) or the Google Play Store (Android
devices).
2Enter the search term "Home Connect".
3Select the Home Connect app and install it on your
mobile device.
4Launch the app and set up Home Connect access.
The app will guide you through the registration
process.
Connecting the appliance to your home network
(LAN)
The appliance must be connected to your home network
using a LAN cable.
The network connection will be established
automatically when the appliance is connected to the
mains electricity supply for the first time and put into
operation.
Connecting the appliance to your home network
(WLAN with WPS)
Requirements:
Your router must have a WPS button. You will find
information about this in the manual for your router.
You need to be able to access your router.
1In the basic settings, select ¯ "Home Connect".
2Touch the % symbol.
3Turn the rotary selector to "WLAN".
4Touch the symbol to confirm.
A message about the WPS function will appear.
5Touch the symbol to continue.
6Turn the rotary selector to "Automatic (WPS)".
7Touch the symbol to start the connection
process.
8Press the WPS button on the router within the next
2 minutes.
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to your home network
(WLAN without WPS)
1In the basic settings, select ¯ "Home Connect".
2Touch the % symbol.
3Turn the rotary selector to "WLAN".
4Touch the symbol to confirm.
A message about the WPS function will appear.
5Touch the symbol to continue.
6Turn the rotary selector to "Manual".
7Touch the symbol to start the connection
process.
The appliance will set up its own "Home Connect"
WLAN network to which the tablet or smartphone
must be connected.
8Follow the instructions in the app.
29
Home Connect en
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to the app
Connect your appliance to the app when setting up
Home Connect or connect your appliance to an
additional Home Connect account. The Home Connect
app can be installed on any number of mobile devices,
which can then be connected to the appliance.
Requirements:
The appliance is connected to the home network.
The Home Connect app has been installed on the
mobile device.
1To connect an additional account, select "Home
Connect" in the basic settings.
2Use the rotary selector to select "Connect to app".
3Touch the % symbol and start the connection
process with .
4Follow the instructions in the app.
If the display shows "Connection to app successful", the
connection process is complete.
Remote Start
Remote start must be activated in order to start and
operate your appliance via the Home Connect app. If
remote start is deactivated, the Home Connect app will
only show the operating modes of the appliance and let
you configure the settings.
Remote start is automatically deactivated if the
appliance door is opened.
When you start a type of heating using the controls on
the appliance, remote start is activated automatically.
You can now make changes or start a new programme
from your mobile device.
Activating remote start
1Set the function selector to ž
2Touch the × symbol.
The symbol × appears next to the ( symbol.
Remote start is activated. You can now start a heating
mode via the app on the mobile device and send the
desired settings to the appliance.
Touch the í symbol to deactivate remote start.
Home Connect settings
Home Connect can be adapted to your specific needs at
any time.
Note: You will find the Home Connect settings in the
basic settings for your appliance. Which settings the
display shows will depend on whether Home Connect
has been set up and whether the appliance is
connected to your home network.
Basic setting Permitted settings Explanation
Connection type LAN/Wi-Fi You can switch between connection types (LAN cable and
Wi-Fi).
Follow the instructions for setting up the relevant connection
type.~ "Setting up" on page 28
Connecting Connect/disconnect Switch the network connection on or off as required (e.g. for
holiday).
Network information is retained after the appliance is
switched off.After switching on the appliance, you will need
to wait for a few seconds while it reconnects to the network.
In networked standby mode, the appliance requires max. 2 W.
Connect to app Start the connection process between the app and the appli-
ance.
Software update As soon as a new software version is available, a message
appears in the display. You can install the new software in the
Home Connect menu Í.
Remote control Activate/deactivate Access the appliance's functions via the Home Connect app.
When deactivated, only the appliance's operating statuses
will be displayed in the app.
Delete network set-
tings
All network settings can be deleted from the appliance at any
time.
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gaggenau BS451111 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gaggenau BS451111 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Gaggenau BS451111

Gaggenau BS451111 Gebruiksaanwijzing - Nederlands - 64 pagina's

Gaggenau BS451111 Gebruiksaanwijzing - Deutsch - 60 pagina's

Gaggenau BS451111 Gebruiksaanwijzing - Français - 64 pagina's

Gaggenau BS451111 Installatiehandleiding - Alle talen - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info