When you open the door of the oven, you will find
the water tank on the side. Depending on the
model, the tank is on the right or left side.
Before use, fill the water tank to the MAX marking
with fresh, cold water.
If the water in your area is very hard, it is better to
use filtered water or non-carbonated bottled water.
Do not use distilled water or other liquids.
Firmly close the lid of the tank. This is important for
the correct functioning of the oven.
Fully insert the water tank until it engages.
If the water tank is empty, the heating stops.The
L symbol appears on the display and three dashes
instead of the temperature are shown.
Open the oven door (Caution: steam might escape).
Slowly pull out the water tank from the slot. A small
amount of water might drip from the valve. Hold the
water tank level when you pull it out.
Fill the water tank to the MAX marking and re-insert
it.
Empty the water tank after every use and leave it to
dry with the lid open. Keep the seal in the lid clean
and dry after every use. Dry the slot for the tank
after every use.
Note:
Do not heat up the water tank in the oven to dry it!
This will damage the water tank.
Water tank
10
