14
Flying Tips & Features
Tips for Safe Operation
• Only y in large, open spaces free of obstacles like power lines, trees, ceiling
fans, etc.
• It is best to y 2 to 3 ft. from the ground and any obstacles. Flying low to the
ground directs turbulence from the rotors back towards the craft, making it
more difcult to control. Avoid walls and ceilings, as the craft may be drawn
towards them if closer than 2 to 3 feet.
• Stand behind the craft when rst taking off, so that you and the craft are facing
the same “forward” direction. This will make it easier to know which direction
the unit is ying.
• Practice basic ight operations like take off, hovering and landing.
• Novice pilots should move the controls slowly and deliberately, using one
control at a time, to get used to the craft’s ying characteristics.
• If you crash, throttle down the engines IMMEDIATELY to reduce the chance of
permanent damage to the craft and other objects.
• If anything obstructs the rotors for any reason, throttle down IMMEDIATELY and
safely clear the obstruction. Check for possible damage before ying again.
Speed Setting
The craft has three settings for the responsiveness of the ight controls. The higher
settings allow for faster and more precise control of the craft. Novice pilots are
recommended to start with the lowest setting.
Press the Speed Setting button once to set the desired speed.
• Low: Gives smooth and predictable control. The remote will chime once to
indicate the speed.
• Medium: The craft will move and respond faster to all control inputs. The
remote will chime twice to indicate the speed.
• High: Highest setting for maximum performance. The remote will chime three
times to indicate the speed.
