611611
1
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Intended use
The product is equipped with a power outlet which can be switched on and off via the integrated
timer. It can be operated and programmed via buttons and a LC display.
As a special feature, a blue backlight, which is used not only for better readability of the display,
but can also be used as a night light, can be activated for the LC display.
The product should be connected to an earthed mains socket; the mains voltage should be
230 V/AC, 50 Hz.
The power consumption of the device connected to the socket of the weekday timer switch
may not exceed 3680 W.
The product may only be used in dry, enclosed spaces.
Always observe the safety instructions included in these operating instructions. Read the
operating instructions thoroughly before using the product. Keep the operating manual for later
reference or pass it on to other users of the weekday timer switch.
Any use, other than the one described above, may damage the product. Moreover, this involves
hazards such as e.g. short circuit, re, electric shock, etc. It is not allowed to modify or rebuild
any part of the product!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owner. All rights reserved.
Explanation of Symbols, Inscriptions
This symbol indicates a health hazard, e.g. electric shock.
The exclamation mark indicates speci c risks associated with handling, function and
use.
The “Hand“ symbol indicates special tips and operating information.
The product is only intended to be placed and used in dry, enclosed indoor areas; it
must not get damp or wet.
Contents
Week day timer switch
Operating Instructions
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions! We do not assume any liability for any consequen-
tial damage!
We do not assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions. The warranty
will be void in such cases!
a) General instructions
The unauthorised conversion and/or modi cation of the product is not permitted
for safety and approval reasons (CE). Do not open/disassemble! Contains no
customer-serviceable parts.
Maintenance or repair works must always be carried out by quali ed experts who
are familiar with the hazards involved and with the relevant regulations.
The device is designed according to safety class I. It may only be used when
connected to an earthed mains socket.
The power outlet of the weekday timer switch is equipped with a child lock. Only
when the prongs of a power plug are placed in both openings of the socket at the
same time will the mechanism release the opening.
Even so, be especially careful if children are around. Children cannot see the
dangers arising from the incorrect use of electrical devices. There is a risk of a
life-threatening electric shock!
The product is not a toy and must be kept out of the reach of children. Position the
product so it is out of the reach of children.
Do not carelessly leave the packaging material lying around since this may
become a dangerous toy for children.
Handle the product with care, it can be damaged by impacts, blows, or accidental
drops, even from a low height.
b) Operation
The product may be used only in dry, enclosed indoor areas; it must not get damp
or wet! Never place the product in direct vicinity of a bathroom, shower, bathtub or
the like. Lethal hazard due to electric shock!
Never plug in or unplug the plug-in power unit with damp or wet hands. There is a
risk of a life-threatening electric shock!
The product must not be exposed to extremes of temperature, direct sunlight or
strong vibrations.
Do not operate the device in environments where there are high levels of dust,
ammable gases, vapours or solvents. There is a danger of re and explosion!
Never connect the product to the power supply immediately after it has been trans-
ferred from a cold room into a warm one (e.g. during transport). The condensation
that develops in such cases could damage the device or cause an electric shock!
Allow the product to reach room temperature. Wait until the condensation has
evaporated. This might take several hours. Only after this should the product be
plugged in to the power supply and put into use.
Ventilators, heaters, heat fans or heaters with open elements should never be left
unattended. We recommend that you do not connect such devices to the weekday
timer switch. Fire hazard!
Always pull the plug of a device connected to the weekday timer switch out of its
socket only at the appropriate gripping surfaces; never pull the plug out by the ex!
Do not overload the weekday timer switch. Observe the maximum connected load
in the chapter “Technical Data”.
Do not connect in series! This can lead to overloading of the weekday timer switch!
Fire hazard!
Do not operate while covered! At higher connected loads, the weekday timer
switch becomes warm, which can lead to overheating and potentially a re if
covered!
Current-free only when the plug is withdrawn! Pull the weekday timer switch out of
the mains outlet.
Do not use the product if it is damaged. There is a risk of a life-threatening electric
shock!
In this case, dispose of the product in an environmentally correct manner.
A safe operation can no longer be assumed, if:
- the product shows visible signs of damage,
- the product does not work at all or works poorly (leaking smoke or a smell of
burning, audible cracking noises, discolouration to the product or the adjacent
surfaces)
- the product was stored under unfavourable conditions
- it was exposed to heavy loads during transport
 Always pull the weekday timer switch out of the mains socket before cleaning it or
when the device will not be in use for a long time.
 Only use the device in a temperate climate, never in a tropical climate.
 Never pour any liquids above or next to the product. It can cause re or perilous
electric shock danger. If any liquid has still managed to enter the device, imme-
diately turn off the power supply to the mains socket at which the weekday timer
switch is connected (turn off the fuse / circuit breaker / residual current operated
circuit breaker of the associated circuits). Only then can you unplug the week-
day timer switch from the mains socket and contact a specialist. Do not use the
product anymore.
 In commercial institutions, the accident prevention regulations of the employer’s
liability insurance association for electrical systems and operating facilities are to
be observed!
 If you have any questions that are not answered in this manual, please contact the
seller of the weekday timer switch or another specialist.
Operating instructions
Digital day switch timer
with light
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

GAO-EMT769A

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw GAO EMT769A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van GAO EMT769A in de taal/talen: Engels als bijlage per email.

De handleiding is 0,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van GAO EMT769A

GAO EMT769A Gebruiksaanwijzing - Nederlands, Deutsch - 6 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info