644054
4
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Programming
To call the program mode, press the ”PGM” button briefly The display shows the first on-time of the first program
group.
A program group always consists of an on-time and an off-time that must be programmed one
after the other. If you have only programmed an on-time by accident, the connected device will
not be switched off until another program group becomes active. Therefore you should always
program the on-time and then the respective off-time (e.g. for program group 1: switching on at
7 a.m., off at 8 a.m.).
The number in the display shows the current program group, the two light bulb symbols indicate the on-time and
off-time of the program group.
On-time
Off-time
Pressing the ”PGM” button several times switches to the next on/off-time in the program group. If the display
shows ”CD”, the countdown mode is active.
1
> 1 > 2 > 2 > ... > CD > time display > 1 > 1 > .......
First select the on-time of a program group (for example ”1
”) with the ”PGM” button.
Set the hour with the ”STD/HRS” button (for quick adjustment hold the button a bit longer).
Set the minute with the ”MIN/CD” button (for quick adjustment hold the button a bit longer).
With the ”WEEK” button you can now choose on which day (or on which days) the switching program of the
program group is to be executed. The respective combination of days will be displayed at the top of the
display.
MO DI MI DO FR SA SO Each day of the week, Monday to Sunday
MO > DI > MI > DO > FR > SA > SO Individual day
MO MI FR Monday, Wednesday and Friday
DI DO SA Tuesday, Thursday and Sunday
SA SO Saturday and Sunday
MO DI MI Monday, Tuesday and Wednesday
DO FR SA Thursday, Friday and Saturday
MO DI MI DO FR Monday to Friday
MO DI MI DO FR SA Monday to Saturday
The abbreviations stand for the following days:
MO Monday
DI Tuesday
MI Wednesday
DO Thursday
FR Friday
SA Saturday
SO Sunday
Press the ”PGM” button to select and display the off-time of the respective program group (e.g. ”1
”).
Set the hour with the ”STD/HRS” button (for quick adjustment hold the button a bit longer).
Set the minute with the ”MIN/CD” button (for quick adjustment hold the button a bit longer).
If you do not press any button for several minutes, the settings will be saved and the display returns to the
current time.
To deactivate the on-time or off-time of a program group (for example when you are in holidays),
first select the desired on-time or off-time of the program group with the ”PGM” button.
Keep the button ”TAG/WEEK” pressed for more than 2 seconds, the display shows ”- - : - -”, the
on-time or off-time of the program group is deactivated and will not be carried out (a programmed
on/off-time will not be deleted, however – only the execution of the switching program is
deactived).
Please note! Always deactivate the on-time and the off-time of the respective program
group.
If you want to reactivate it again, select the respective on/off-time of the program group with the
”PGM” button and keep one of the buttons ”STD/HRS”, ”MIN/CD” or ”TAG/WEEK” pressed.
If you have already programmed the respective on/off-time (and the settings have been saved)
it will now be reactivated, i.e. the respective switching program is active again.
Please note! Always activate the on-time AND the off-time of the respective program
group.
Countdown mode
In the countdown mode you can set a time between 1 minute and 23 hours, 59 minutes. With the start of the
countdown the device is switched on. When the countdown is over (”0:00:00”) the device is switched off.
When the countdown mode is selected or started, all automatic switching programs are
deactivated. That means that no switching on or off will take place at the defined times and
weekdays in the program groups.
When the time switch is in normal operation (display of the time), press the ”MIN/CD” button to start the
countdown (this is only possible if a countdown time has already been programmed!)
Follow the instructions in ”Programming” (in the time display, press the ”PGM” button several times until the
display shows ”CD” in the top left, then set the desired countdown time with the ”STD/HRS” and ”MIN/CD”
buttons; wait a little moment, until the settings are stored and the display returns to the clock).
The device is switched on, the display shows the elapsed countdown time and the symbol ”CD” in the top left
corner.
During a running countdown you can switch between the time display and the countdown display with the
”PGM” button. In the time display the symbol ”CD” flashes.
If you want to stop the countdown manually, press the ”MIN/CD” button briefly or ”TAG/WEEK” (switch to the
countdown display with the ”PGM” button before, if necessary). The original countdown time is displayed, the
device is switched off. (You could now restart the countdown if desired). After 8 seconds the display returns
to the normal time display.
When the countdown is over (”0:00:00” in the display), the device is switched off and the display returns to
the time display after 8 seconds (if you have pressed no button).
Maintenance and care
The product does not require any maintenance. You should never open it or take it apart.
Before you clean the time switch, pull it out of the mains socket and disconnect the device.
Clean the outer side with a dry, clean, soft cloth. Never use aggressive cleansing agents or chemical solutions
since this might damage the surface of the housing or impair operation.
Do not rub too hard at the display, you could cause scratch marks.
Dust can be very easily removed with a soft, clean brush.
Disposal
Electric and electronic products contain many valuable recyclable materials. Therefore you
should dispose of the product at the end of it serviceable life according to the relevant legal
provisions and regulations (e.g. return it to a special recycling facility of your town).
Do not put the product in the household rubbish!
Dispose of the battery separately.
For removing the battery, the time switch must be completely dismantled (first, disconnect it
completely from the mains voltage, observe safety instructions, if you are uncertain, have it done
by a specialist!).
Never short-circuit the battery contacts (plus and minus) – danger of explosion!
Technical specifications and features
Can be plugged in a 230V~/50Hz mains socket with a protective conductor
Maximum connecting load: 3680 W (230V~, 16A) resistive load
Only for operation in dry indoor rooms!
DCF receiver for automatic setting of the time/day, manual setting possible
A socket with a protective conductor for connecting a device, with integrated child-proof protection
LCD
Four programming groups (with programmable on/off-times)
Countdown mode (max. countdown time = 23 hours, 59 minutes)
Shortest switching interval: 1 minute
Integrated NiMH battery for saving data
Ambient temperature +5°C to +40°C
Declaration of conformity (DOC)
The manufacturer herewith declares that this product complies with the essential requirements and other
relevant regulations of guideline 1999/5/EC. The declaration of conformity to this product is enclosed as an extra
sheet.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw GAO EMT707RCC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van GAO EMT707RCC in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info