Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_rev19
45
Safety Instructions
t) Do not use the device in an enclosed space where dangerous carbon monoxide can accumulate.
u) Mow only in daylight or under good artificial light.
v) If possible, avoid using the device in humid conditions.
w) Make sure that you have a firm stand on hangers.
x) Never run with the device, but walk.
y) Always mow crossways with the device on slopes and not up and down.
z) Be especially careful when changing direction.
aa) Do not mow excessively steep slopes.
bb) Be especially careful when mowing backward or in your direction.
cc) Turn off the engine if the mower needs to be tilted due to transportation to move it to another
mowing area.
dd) Never use the device with defective protective shields or without protective devices, such as
slipped discharge chutes or cuttings catcher.
ee) Do not change the engine settings or increase the speed.
ff) Disconnect the blades and tighten the starter cord slightly before starting the engine.
gg) Start or start the engine carefully according to the instructions. Keep your feet away from the
blades.
hh) Do not tilt the mower when starting the engine unless the device needs to be inclined to start. In
this case, do not tilt the device more than necessary and only lift the part of the device that is
away from the user.
ii) Do not start the engine when someone is standing in front of the exhaust port.
jj) Do not place your hands or feet near the rotating parts. Stay away from the exhaust ports at all
times.
kk) Never lift or transport the mower while it is still in operation.
ll) Stop the engine and remove the spark plug connector from the spark plug:
- Before cleaning a blockage or clogged pipes
- Before you check, clean, or perform any work on the device.
- After you have collided with a foreign object. Check
the device for damage and repair it before put the device back into operation.
- If the lawnmower vibrates excessively, check this immediately.
t) Stop the engine:
- When you leave the mower/ Before refilling
Maintenance and Care
a) Make sure that all nuts, screws, and bolts are tight so that the device can work safely
b) Never store the device with fuel in the tank in buildings where vapors of open flames or sparks can be
generated
c) Let the engine cool down completely before storing the device in closed rooms
d) Keep the engine, silencer, battery compartment, and fuel tank free of grass clippings, leaves, and grease
to reduce the risk of fire
e) Check the grass catcher regularly for wear or loss of functionality
f) Always replace worn or damaged parts for safety reasons
g) If the fuel tank has to be emptied, this should be done outdoors
