Original Bedienungsanleitung FUXTEC FX-MS152 / FX-MS162_de_en_fr_ita_rev16
38
position.
● Children must not have access to the device. Spectators should stand at least 15
meters away from the working area.
● Keep hands and feet away from the nylon cutting head or metal blade during
operation.
● Do not use the device if you are tired, ill, or under the influence of medication,
drugs, or alcohol.
● Use an undamaged nylon cutting head. If you hit a stone or any other obstacle,
stop the device and check the nylon cutting head. Never use a defective or
unbalanced nylon cutting head.
● Before starting, after failure or impact, always check the device and make sure it
is in good condition.
● Attention! Local regulations may limit the use of the device
● Always keep the device with the cutting tool in good condition. Note, improper
maintenance, the use of non-compliant spare parts or removal, or modification of
safety devices can cause damage to the device, and severe injury to the person
working with it.
● Secure the device well during transport to prevent fuel loss, damage to the
device, and injury. Always fit the transport protection of the cutting blade before
transporting or stowing the device.
● On devices with a clutch, regularly check that the cutting attachment stops
rotating when the engine is idling.
● Always check the device for loose fasteners, fuel leaks, damaged parts, etc.
before each use. Replace used parts before use.
● It is necessary to take sufficient breaks and change the working position.
● Do not store the device in a closed area where fuel vapors can reach an open fire
from water heaters, stoves, etc. Store the device in a well-ventilated area only.
● IMPORTANT: When filling the fuel, make sure that the engine is off and cooled
down. Never refuel when the device is running or hot.
