Original-Bedienungsanleitung FUXTEC Laubbläser/-sauger FX-LB126/LBS126_de_en_fr_ita_rev07
33
29. Assembly as leaf blower
Caution: Always switch off the engine when carrying out assembly and/or maintenance work!
Wear protective gloves during assembly to protect yourself from cuts.
Mount the two blowpipes into each other and position them on the main device. Make sure that
they are screwed on all the way and fix them with screw A. Using the blowing attachments:
• 9A for paved surfaces such as pavements, driveways, etc.
• 9B for lawns or grassy areas
30. Assembly as leaf vacuum
6. Insert the curved suction tube 11 through the large opening of the leaf trap bag 12A and
push the tapered side of the tube through the narrow opening 12B
7. Twist the bent suction pipe 11, now connected to the leaf collection bag 12, on the main
device
8. Now open the lock 13 of the air intake grille 15
9. Now fit the two suction pipes 10 into one another and position them on the main device
with the air intake grille 15 open.
10. Ensure that the suction pipe device 10 is seated correctly and turn it until it stops