781774
38
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
Original manual for petrol chainsaw FX-KSP series
Pull the starter handle until the engine
starts.
Engine starts:
Chainsaw runs at idling speed
Engine does not start:
Repeat starting procedure until engine
starts.
Slowly and surely lift the chainsaw up off
the ground. Do not touch the throttle trig-
ger when doing this!
With the left hand, pull the front hand
guard (chain brake lever) towards the front
handle and, in doing so, release the chain
brake.
The saw chain can now run freely on
the guide rail.
CAUTION!
Actuate the throttle trigger (8) only after the
chain brake has been released. The clutch
could otherwise be damaged.
The throttle trigger can now be actuated.
Before starting to saw, check the chain lu-
brication.
To do this, place the chainsaw against
a light background and open the throttle
fully.
If a slick of chain oil can be seen on the
light background (e.g. sheet of paper),
the chain lubrication is set correctly.
The chainsaw is ready for operation.
Stopping the engine
Turn the On/Off switch to the "0" position.
CAUTION!
Risk of injury!
Before switching off the chainsaw, always
allow the engine to die down!
Warm start
CAUTION!
The chainsaw is fitted with an Easy-Start
system. Do not pull the start handle quickly
or suddenly.
Block the chain brake using the front hand
guard. To do this, push the front hand
guard forwards until it is heard to engage.
Turn the stop switch to the "I" position (9).
Place the chainsaw on even ground and
secure. Step into the handle recess with
the right foot to do this.
CAUTION!
Before starting the engine:
When placing on the ground to attempt to
start the engine, ensure that the saw chain is
not in contact with the ground.
If there is ground contact while the engine is
being started there is an acute risk of acci-
dent!
Components of the chainsaw could be dam-
aged beyond repair.
Secure the chainsaw with the left hand on
the front handle.
Pull out the chainsaw's starter handle (11)
on the cable until a resistance is felt. Then
continue to pull out in doses.
Engine starts:
Chainsaw runs at idling speed
Engine does not start:
Repeat starting procedure until engine
starts.
Slowly and surely lift the chainsaw up off
the ground. Do not touch the throttle trig-
ger when doing this!
With the left hand, pull the front hand
guard (chain brake lever) towards the front
handle the chain brake can be heard to
disengage.
The saw chain can now run freely on
the guide rail.
The throttle trigger can now be actuated.
The chainsaw is ready for operation.
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fuxtec FX-KSP250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fuxtec FX-KSP250 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2.58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info