781774
31
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
Original manual for petrol chainsaw FX-KSP series
31
Have damaged parts replaced or re-
paired, ensuring that the correct specifi-
cation of spare parts is observed when
doing so.
Before commencing work, familiarise
yourself in detail with how to operate
the chainsaw.
Noise and vibration
NOTE
Values for noise levels and total vibrations can
be gleaned from the "Technical data" table.
CAUTION!
The indicated measurements refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration level specified in these instruc-
tions was measured in accordance with a
standard test procedure that meets the re-
quirements of EN 60745.
If the chainsaw is not maintained properly, the
vibration level could be affected during opera-
tion. This may significantly increase the vibra-
tion load over the total working period.
To estimate the vibration load more accu-
rately, the times should also be taken account
of during which the equipment is switched off.
This may significantly decrease the vibration
load over the total working period.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).
Information about noise develop-
ment
CAUTION!
The actual vibration emissions value during
operation of the machine may deviate from
that specified in the operating instructions or
by the manufacturer. This could be influ-
enced by the following factors, which should
be taken account of before and during use:
Is the chainsaw being used correctly?
Is the procedure during processing and
cutting of the wood correct and appro-
priate?
Is the machine in a good state of repair, is
the sharpness of the cutting tool OK and
is the correct cutting tool being used?
Are the handles or, if necessary, op-
tional vibration damping handles fitted
and are these firmly attached to the ma-
chine body?
NOTE
There may be national regulations (environ-
mental, occupational safety) that restrict use
of the chainsaw.
This is loud equipment and the noise cannot
be avoided. For longer periods of operation,
make sure that it is used during authorised
and dedicated times. Respect quiet periods
where required and do not make more noise
than necessary. Ensure, for personal safety,
that hearing protection is worn by the opera-
tor and persons in the vicinity.
All of the aforementioned precautions are
not enough to prevent vibration white fin-
ger or carpal tunnel syndrome.
Keep an eye on the condition of your
hands and fingers if you are a frequent or
regular user.
If you experience any unpleasant feeling in
your hands or skin discolouration during
use of the machine, stop work immedi-
ately. Seek medical assistance without de-
lay in the event of one of the above symp-
toms.
Take a sufficient number of breaks from
work. Failure to take sufficient breaks from
work can cause hand-arm vibration syn-
drome.
Depending on the workload, therefore, es-
timate the degree of exposure from chain-
saw use. Reduce the risk of being ex-
posed to vibrations in doing so.
Make a work plan. The vibration load can
be reduced in this way.
Minimise use of the chain saw at tempera-
tures below 10°C.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fuxtec FX-KSP250 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fuxtec FX-KSP250 in de taal/talen: Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 2.58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info