Original Bedienungsanleitung Baumpflegesäge FX-KS226_de_en_fr_ita_rev01
63
10.1.5 Using the chainsaw with one hand
Do not use the chainsaws for tree care with one hand in unstable working
positions or instead of a hand saw for sawing off branch tips with a small
diameter.
Chainsaws for tree care should only be used with one hand if
d) it is not possible to achieve a working position where ambidextrous
operation is permitted,
e) it is necessary to secure the working position with one hand, and
f) the chainsaw is used in a fully extended position, at right angles to and
out of line with the user's body.
Never saw with the kickback area at the tip of the chainsaw guide bar, hold
on to the branch where you are sawing, or try to catch falling parts.
10.1.6 Removing debris from a jammed chainsaw
If the chainsaw becomes jammed during cutting:
d) switch off the chainsaw and attach it securely to the inside of the tree
(i.e. to the trunk) or to a separate tool rope,
e) pull the chainsaw out of the notch while lifting the branch as far as
necessary, and
f) if necessary, use a hand saw or second chainsaw to release the jammed
chainsaw by cutting at least 30 cm away from the jammed chainsaw.
Regardless of whether a hand saw or chainsaw is used to loosen a jammed
chainsaw, the cuts to loosen the chainsaw should always be made on the
outside (towards the tips of the branches) so that the chainsaw is not carried
along with the sawn-off parts and further complicates the situation.
