Maintenance and care
WARNING!
Before performing any work on the garden
tool, remove the battery.
Cleaning
WARNING!
Do not use water or liquid detergents.
◼
Remove dirt and dust from the housing
with a paintbrush and dry cloth.
◼
Remove grass clippings from the
underside of the trimmer.
◼
Keep the ventilation slots clean and free
of dust.
Changing the cutting head
◼
Press and hold down the lock button (
Œ.
).
◼
Loosen the cutting head by turning in an
anti-clockwise direction and remove (
œ.
).
◼
Attach the new cutting head by turning
clockwise. Tighten hand-tight.
Replacing the line spool
CAUTION!
Spare parts must conform with the require-
ments specified by the manufacturer. Use
original spare parts only or spare parts
authorised by the manufacturer.
Removal
◼
At the same time press both catches
together on the spool cover (
Œ.
) and
remove the cover (
œ.
).
◼
Remove the old line spool (
3.
) and the
spring (
4.
).
◼
Clean the spool housing, spring and
cover. Use a clean cloth.
Install
◼
Insert the spring (thin end upwards) into
the spool housing (
5.
).
◼
Pull the line ends of the new line spool out
of the two opposing retaining slots of the
spool housing (
6.
).
◼
Insert the new line spool into the spool
housing (
7.
).
◼
Re-attach the cover to the spool housing,
ensuring that both catches click into
position (
8.
).
◼
Pull on the line ends (
9.
) to release the
lines from the retaining slots.
