-18-
U
SING OTHER FUNCTIONS
Non-slip Adjustable Lever Head
The length of the stick head can be adjusted.
1. Unlock two heads A and B by turning them in the
arrow directions.
2. Adjust the stick to the most comfortable length and
lock the heads by turning them in the opposite direction
of the arrows.
Aileron/Elevator Dual Rate (D/R) Function
The maximum travel of the aileron and elevator servos can be altered by operating the
dual rate switch. For instance, when the switch is in the lower position, the deflection
angle is the normal deflection angle. The normal deflection angle, at the low switch
position, can be adjusted by the dual rate trimmers (AIL/ELV). The rate can be adjusted
from 50% (position 0) to 100% (position 10) of the maximum deflection angle. When
the switch is set to the upper position, spins, snap rolls, and other aerobatics that require
a maximum deflection angle can be performed.
1. Turn on the transmitter and receiver power.
2. Switch the dual rate switch (D/R) to the lower position.
3. Set the stick to the maximum travel in either direction.
4. Using the trimmer, adjust the servo horn to the desired angle.
Adjust each channel (AIL/ELV) by repeating steps 1 through 4.
*When not using the dual rate function, set the AIL and ELV trimmers to 100%
(fully clockwise).
