29053
74
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
Sailplane Section
Setting the Aileron 1 Travel
You now set the left-side travel for Aileron 1. Press the
B
key to activate left travel setting for Aileron 1 and set
the travel with the numeric keys E to M . The number
keys 0
through 100
input
the
value
directly. The +
and - keys increase or decrease the value by 1. The
+/- keys may be used to reverse the throw direction.
If you are not sure what you are changing, hold the
stick to one side and press different keys if there is no
effect, move the aileron stick to the other side and con-
tinue. Your setting may vary from 120 to +120%, with
an initial value of +100%.
Now set the right-side travel for Aileron 1. Press the
Q key to activate Aileron 1 right travel setting and set
the travel with the numeric keys as before.
Setting the Aileron 2 Travels
This procedure
is
repeated for Aileron 2.
Press the C
key to activate left travel setting for Aileron 2 and set the
travel with the numeric keys E to M as before.
Now set the right-side travel for Aileron 2. Press the
13 key to activate Aileron 2 right travel setting and set
the travel as before.
Setting the Flap Travels — 1 and 2
You now set the travel for Flap 2. Press the D key to
activate travel setting for Flap 2 and set the travel with
the numeric keys E to M. Your setting may vary from
-100 to +100%, with an initial value of +100%.
Now set the travel for Flap 1. Press the O key to
activate Flap 1 travel setting and set its travel with the
numeric keys. Its initial value is —100%.
Flap Trim Offset Setting
Flap trim offset sets the flap position from which
motion occurs. To input the flap trim offset amount
setting, move to the next screen by pressing the NXT R
key. Next, press the B key, then set the flap trim (left-
side lever, LS) to the position to be set and press the
F (SET) key.
Flap Trim Authority Setting
In the Flaperon mode, Flap Trim moves both ailerons
upwards or downwards together. To input the Flap Trim
Authority. Press the C key and set the rate with the
numeric keys F to M. You may choose any value from
0% to 100% for the Flap Trim Authority. The initial
setting is 30%, but a smaller number is recommended.
Sailplane Section, Page 150
74

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba 9ZHP_part2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba 9ZHP_part2 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info