Handleiding Futaba 9ZAP_part1 (pagina 42 van 78) (Engels)

29047

Verklein

Vergroot

Pagina terug

1/78

Pagina verder

Model Setting Section

CSL—CONDITION SELECT

One of the most powerful features of the

Futaba PCM 1024Z system is the ability to allocate

as many as eight different flight conditions to a

single model memory. It is possible to define dif-

ferent values of mixing, trims, neutrals, and other

functions for each flight condition, making it pos-

sible to choose from eight different aircraft setups

while flying one model! You may have differing

flight conditions automatically called up by a pre-

defined position of a stick, knob, lever, or switch.

This command may also be used to define what

switches and/or controls are used to activate each

flight condition.

The CSL function automatically allocates four

flight conditions to the Airplane, Helicopter

(NORML, IDLE-UP 1&2, and THROTTLE HOLD)

and Sailplane (define NORML, START, SPEED,

and Landing) model types. However, each flight

condition

must

activated

and

assigned

switch. Condition D is the default condition, also

referred to as NORML, and is the only one active

when a new model type is defined. This condition

always

on,

and

remains

until

other

conditions

are activated by switches.

The PCM 1024Z system maintains each flight

condition separately, and the same condition may

not be used by two different models — they must

have separate ones (of course, you may use the

CPC copy function to make an identical flight

condition for the second model).

Also, for a particular model, you cannot have

model conditions stored in both the transmitter

and the CAMPac — they must all be in one or the

other. You may store any type of flight conditions

in the CAMPac.

Setting Up Flight Conditions

The allocation of a flight

condition to a particular

model memory has two steps:

1. Select an unused flight condition number and activate

it;

2. Define the activation switch and the ON position you

want.

Set of Flight Conditions

for Chosen Model

Flight Condition

Selection Keys

Flight Condition Name

Flight Condition Number

• This key calls up the

LIST of all flight

conditions

• Return To Model

"00-NULL" indicates an

unselected condition

Flight Condition Allocation

To allocate flight conditions to a particular model

memory, first check for an unused condition in the flight

conditions list. Press the LST (Q) key to display this

list. Model No. 00 indicates an unused flight condition.

Conditions 01—50 reside within the transmitter, and con-

ditions 51—72 are stored within the external memory

module (optional). Conditions 1—10 are the default or

normal conditions for models 1—10.

To view the next ten conditions, press the

NXT

(P) key; to view the previous ten, press the

PRE

(

) key. You may return to the setting screen by pres-

sing the

END

(

) key.

Now you select the flight condition you wish to

define; select this with the 2 to 8 (B to H) keys

(remember that the Default condition cannot be chang-

ed). Next, enter the number of the unused flight condi-

tion using the numeric keys. The numeric keys allow you

to choose a number very near to the desired one, then

you may use the + and - keys (F and G) to increase

or decrease the displayed number by one. You can use the

NUL (H) key to reset the number to an unselected

state.

Next you press the

SET

(O) key to set the condi-

tion. If you get a warning "CONDITION IN USE CAN-

NOT ASSIGN" you must go back and choose another,

unused condition.

Activation Switch Definition

Call the switch setting screen by pressing the SWT

(P) key. Next, set the desired switch position and ON

direction with the appropriate buttons (for a description

of the switch setting function, see p.37). Use the END

(N) key to complete the setting.

Model Setting Section, Page 40

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Futaba 9ZAP_part1 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info