29001
90
Verklein
Vergroot
Pagina terug
1/105
Pagina verder
86
The Throttle
Needle mixing function is used to control the engine’s mixture using a 5-
point curve relative to throttle stick movement . The engine must be equipped with a
mixture control system, such as needle control or some other mixture adjustment, and the
needle servo must be plugged into CH8. The CH8 knob may be used for High-side mixture
adjustment when the idle-up (IDLE) function is ON.
You can have independent control of throttle
needle mixing in both the Normal
(NORM) and idle-up (IDLE) conditions. The TH
NDL function includes an ‘acceleration’
function that precedes rapid throttle opening and provides the engine with the best mixture.
Setting ThrottleNeedle Mixing
function
To GOVrpm
function
Curve Name
Display
(NORM
or IDLE)
Data input keys
These keys are used to
move around in the
TH-NDL function.
1. Turn the TH-NDL function ON
by pressing the (+) key ("ON"
displayed). Turn off (INH) the
function with the (-) key.
2. Input 5-point curve values
Move the lower arrow to the
position you want to set with the
CURSOR keys (the curve point is
indicated by the arrow below the
numbers 1-5, and the current
throttle position is above the
numbers). Enter the desired curve
value with the (+)/(-) keys.
• If you're unhappy with what you've
set, you may return to the default
value by pressing the (+) and (-)
keys simultaneously.
Initial values:
POS1 = 0%
POS2 =25%
POS3 = 50%
POS4 = 75%
POS5 = 100%
Curve Point
Value
(Range: 0 -
+100%)
Move between the TH-NDL
NORM and IDLE screens
with the (
)(
) keys.
The bottom arrow shows the point on
the five-point curve currently being set.
The blinking item on the
setting screen is the
current setting item.
Top arrow indicates the
current stick position (2
arrows means it's
between points)
Curve points 1-5
To INVERT or
TH-NDL NORM
Acceleration amount
Range: 0 to 100%
(Initial value: 0%)
3.Acceleration function setting
Enter the desired acceleration value with the (+)/(-) keys.Return to
a 0 % value by pressing the (+)/(-) keys simultaneously.
Acceleration is only mixed in when the throttle is moved towards
High. If Throttle Hold is activated, the needle servo moves and
acceleration is performed even though the throttle servo is fixed.
Idle-up functions are performed when the throttle curve idle-up
function is ACTivated.
90

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Futaba 8UAPS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Futaba 8UAPS in de taal/talen: Engels als bijlage per email.

De handleiding is 4,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info