522165
4
Verklein
Vergroot
Pagina terug
1/5
Pagina verder
PUBLISHED BY FUSION ELECTRONICS LIMITED:
© Copyright 2010 by FUSION Electronics Limited.
All rights reserved. Specications and design are subject to change
without notice.
YOU CAN HELP PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations:
Hand in the non-working electrical equipment
to an appropriate waste disposal center.
006
INSTALLATION
007
TROUBLE SHOOTING
INSTALLATION GUIDE
1. Check mounting position for adequate space (see caution)
2. Place the mounting bracket in position, then mark and drill the mounting holes.
3. Place the mounting bracket and insert screws.
4. Connect the wires from the source unit to the box speaker ensuring the correct polarity is
observed.
5. Attach the box speaker to the bracket using the mounting knobs supplied
6. Adjust the angle of the speaker to the preferred position before tightening the mounting knobs
CAUTION: For speaker mounting restrictions, please refer to manufacturers recommendations for any
related navigational equipment.
Installation Tips
Any speaker will only perform to its best capabilities, when correctly placed in the listening area.
FUSION Engineers recognise that unlike a home or motor vehicle installation, there are an extremely
wide range of marine environments where speakers may be placed. FUSION Full Range Marine Speakers
are optimised to perform in the widest possible range of mounting locations, but a little thought and
care with placement will always be rewarded with better sound.
High frequencies are directional. Placing the speakers low down in the boat will lose some of this
information.
Speakers should be placed to simulate a “sound stage”, by being placed where you are able to hear
both speakers in a stereo situation.
TROUBLE SHOOTING
Before you contact your FUSION dealer or service centre, FUSION requires that you do some simple
trouble shooting to help diagnose the problem.
Problem Solution
No sound Check all connections from the source unit amplier to
the speaker terminals are connected correctly
System lacks in bass Check the connections from the source unit/
amplier to the speaker. Ensure the positive wire from
the source is connected to the positive of the speaker.
System lacks in high frequencies Check polarity
Check the bass / treble control settings on the source
unit
Distorted sound Check all wiring
Check that it is not the surrounding panels of the craft
rattling. Check connections from the source to the
speaker.
www.busse-yachtshop.de | info@busse-yachtshop.de
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fusion MS-BX402 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fusion MS-BX402 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info