691366
13
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
The source icon is in the lower-left corner of the stereo
screen, and shows the source that is currently playing.
2
Select PARTYBUS
TIP: You can press and hold the source icon to show
available FUSION PartyBus devices.
The device shows a list of available FUSION PartyBus
devices on the network.
3
Select the device you want to stream from.
The stereo begins streaming the same source as the connected
FUSION PartyBus device, and a green border appears around
the device screen. All media playback functions affect both
devices.
Stopping Streaming from a FUSION
PartyBus Device on the Network
If you are streaming from a FUSION PartyBus device on the
network, you must disconnect from the device before you can
play local sources on the stereo.
1
Select the source icon.
The source icon is in the lower-left corner of the stereo
screen, and shows the source that is currently playing.
2
Select PARTYBUS > LEAVE PARTYBUS.
TIP: You can press and hold the source icon to quickly leave
the FUSION PartyBus network.
Network UPnP Playback
This stereo can play content from Universal Plug and Play
(UPnP) devices connected to the network, such as computers
and media servers. You must connect your UPnP device to the
same network as the stereo using a wired or wireless
connection, and you must configure the device to share media
over the network. See the owner's manual from your UPnP
device for more information.
After you have connected your UPnP device to the network and
configured it to share media, the UPnP source appears on the
source selection screen of each stereo on the network
(Selecting a Source, page 1).
General Settings
Select > .
NOTE: When an check box is filled, the option is on. When the
check box is clear, the option is off.
ZONE: Enables you to configure the speaker zones (Speaker
Zone Settings, page 9).
BRIGHTNESS: Adjusts the screen and dial backlight brightness
(Adjusting the Backlight and Dial Brightness, page 2).
TUNER REGION: Sets the region used by the FM, AM, DAB,
and SiriusXM sources.
LANGUAGE: Sets the language on the device.
DEVICE NAME: Sets a name for this stereo.
TELEMUTE: Sets the behavior of the mute function when the
device is connected to a hands-free mobile phone. When a
call is received, the device can either mute the audio or
broadcast the call through the Aux1 input. See your hands-
free kit instructions.
SEARCHING: Enables FUSION Alpha Search Technology
(FAST), which allows you to quickly search for tracks by letter
or number. You can select a number to enable the FAST
menu if your music device contains more than the selected
number of items.
AirPlay PASSWORD: Sets a password that a user must enter
when connecting to the stereo using the AirPlay feature
(Setting an AirPlay Password, page 3).
POWER OPTIONS: Adjusts power settings, such as the power-
save mode (Power Options, page 9).
PARTYBUS SETTINGS: Sets the sources the device can
stream over the FUSION PartyBus network. You may want to
disable some sources, such as OPTICAL, because streaming
over the network introduces a small audio lag that is not
desirable in some situations.
NETWORK: Enables you to configure the device network
settings (Network Configuration, page 10).
UPDATE: Updates the stereo or connected devices (Update
Options, page 11).
ABOUT: Shows the software version information for the stereo.
Speaker Zone Settings
Setting a Zone Name
You can set a name for a speaker zone to make it easier to
identify.
1
Select > > ZONE.
2
Select a zone.
3
Select ZONE NAME.
4
Use the on-screen keyboard to enter a name, and select .
Linking Zones
You can link zones 1 and 2 to keep the volume levels
synchronized. Adjusting the volume of either of the linked zones
affects both zones.
Select > > ZONE > ZONE 2 > LINK TO ZONE 1.
When zones 1 and 2 are linked, appears on zones 1 and 2 on
the volume screen.
NOTE: After zones 1 and 2 are linked, you cannot adjust the
volume of each zone individually.
Enabling Volume Control of Zone 3 or 4 from a
Connected Amplifier
By default the volume of zones 3 and 4 are controlled by the
stereo. You can control the volume of these zones using the
connected amplifier instead.
1
Select > > ZONE.
2
Select zone 3 or zone 4.
3
Select VOLUME CONTROL to clear the check box.
The audio signal from the zone is provided to the amplifier as a
fixed-line-level output.
Disabling a Zone
You can disable an unused zone and remove it from the audio
level pages. When a zone is disabled, you cannot change any of
the settings for that zone. You can disable zones 2, 3, and 4
only.
1
Select > > ZONE.
2
Select a zone.
3
Select ZONE ENABLED to clear the check box.
Disabling the Internal Amplifiers
If you do not connect speakers directly to zones 1 and 2, you
can disable the internal amplifiers to reduce power consumption.
1
Select > > ZONE.
2
Select INTERNAL AMP ON to clear the check box.
Power Options
Select > > POWER OPTIONS.
NOTE: When an check box is filled, the option is on. When the
check box is clear, the option is off.
POWER SAVE: Disables the LCD backlight after one minute of
inactivity to save battery power.
General Settings 9
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Fusion Apollo RA770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Fusion Apollo RA770 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Fusion Apollo RA770

Fusion Apollo RA770 Installatiehandleiding - Nederlands - 8 pagina's

Fusion Apollo RA770 Gebruiksaanwijzing - Nederlands - 20 pagina's

Fusion Apollo RA770 Gebruiksaanwijzing - Deutsch - 22 pagina's

Fusion Apollo RA770 Gebruiksaanwijzing - Français - 22 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info