Handleiding Fusion Apollo MS-ERX400 (pagina 6 van 12) (Engels)

740411

Verklein

Vergroot

Pagina terug

1/12

Pagina verder

• Turn the dial to highlight an item on the screen.

• Press the dial to select the highlighted option.

Entering Text

In a field that allows you to enter text, select to erase the

existing characters.

If necessary, select or to use numerals or letters.

If necessary, select to change the case.

Turn the dial to choose a character, and press the dial to

select it.

Select to save the new text.

Control Screen

From the CONTROL screen, you can adjust the volume of any

zone on the network, create and edit stereo groups, and choose

a stereo to control.

Name of the stereo or zone on the network currently being

controlled by this device

Name and active source of a stereo on the network

Indicates that additional zones or stereos can be seen when you

scroll through the list

Select to add or remove stereos from a group (Fusion PartyBus

Networking, page 3)

Available speaker zones for network stereos

If you scroll down, additional zones are shown under the names of

other stereos on the network

Home zone indicator (Setting the Home Zone, page 2)

Naming the Device

You should enter a unique name for this device so you can

easily identify it when viewing devices on the Fusion PartyBus

network.

NOTE: You should provide unique names to all of the devices

and zones on the network to avoid confusion when grouping,

controlling, and setting up stereos and zones. You should also

turn off zones that are not in use.

For further customization, you can provide unique names for the

sources on each stereo and turn off unused sources.

Select > SETTINGS.

Select the device to rename.

Select DEVICE NAME, and enter a unique name for the

device.

Setting the Home Zone

The home zone is the speaker zone that you adjust by default

when you turn the dial.

Select > SETTINGS.

Select the name of this device.

Select ZONE > ASSIGN HOME ZONE.

Select a zone.

Temporarily Selecting a Stereo to Control

NOTE: You can also combine compatible stereos on the

network into groups for synchronized playback (Fusion PartyBus

Networking, page 3).

Press the dial to open the CONTROL screen.

Turn the dial, and select the stereo or zone you want to

control using this device.

The name of the stereo or zone appears on the status bar,

and you can change sources, settings, and adjust the volume

for the selected stereo or zone.

Adjusting the Volume

Turn the dial to adjust the volume.

If necessary, press the dial to view all zones, and select a

different zone.

TIP: You can select ALL to control all zones on the stereo or

all zones in the group at the same time (Fusion PartyBus

Networking, page 3).

Muting all Connected Stereos

You can quickly mute the audio from this stereo or from all

stereos connected to the Fusion PartyBus network (Fusion

PartyBus Networking, page 3).

From any source, press .

The mute symbol appears and audio from this stereo is

silenced.

NOTE: If the stereo is part of a group, the audio from all

grouped stereos is silenced.

Press and hold the dial to select MUTE SYSTEM.

Audio from all connected stereos is silenced.

Press and hold the dial to select UNMUTE SYSTEM.

Audio is restored to all connected stereos.

Adjusting the Subwoofer Level

You can adjust the subwoofer level for each zone.

Press the dial to open the CONTROL screen.

Turn the dial to select a zone.

Press and hold the dial.

The SUB LEVEL adjustment for the zone appears.

Turn the dial to adjust the subwoofer level.

Selecting a Source

Select .

Turn the dial to highlight a source.

NOTE: If the is device part of a group on the Fusion PartyBus

network, continue turning the dial to access the sources on

other devices in group (Fusion PartyBus Networking,

page 3).

A zone stereo, such as the Apollo SRX400, can create or join

a group to control and play sources from other stereos, but it

cannot share its sources with the group.

Press the dial to select the source.

Adjusting the Backlight Brightness

TIP: You can enable a power-saving option to turn off the

display on this remote control after a period of inactivity (Power

Options, page 4).

Select > SETTINGS.

Select the name of this remote control.

Select BRIGHTNESS.

Adjust the brightness level.

NOTE: You can adjust the backlight brightness on this

remote control only. If you want to adjust the brightness on

other remote controls or stereos on the network, you must

adjust the setting from each remote control or stereo directly.

2 Getting Started

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Fusion Apollo MS-ERX400 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Fusion Apollo MS-ERX400

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info