522135
42
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
36
4.9 Installation Menu
The installation menu mainly contains
items which are set at installation.
1. Turn on the power while pressing the
[MENU/ESC] key. Continue pressing
the [MENU/ESC] key until the
Installation menu appears.
SIMULATION On
TEST ...
LCD PATTERN ...
MEMORY CLEAR
NMEA PORT : In/Out
NMEA MIX : Off
GPS WAAS* : Off
SET BOTTOM LEVEL ..
Installation Menu
* = Setting cannot be changed when
NMEA PORT setting is "IN/IN."
Installation menu
SIMULATION: The simulation mode
provides, without connection of the
transducer, simulated operation of the
equipment, using internally generated
echoes. All controls are operative. The
message “SIM” appears at the top right
corner on the screen when the
simulation mode is active.
1. At the installation menu, press to
open the simulation mode options
window.
2. Press to choose “On” to turn on
the simulation mode.
3. Press the [POWER/BRILL] key
about three seconds to turn off the
power.
4. Press the [POWER/BRILL] key to
turn on the power. “SIM” appears at
the top right corner of the display.
5. To turn off the simulation mode,
select Off at step 2.
NMEA port setup
(NMEA PORT, NMEA MIX)
The POWER port can function as an
input port or input/output port. Change
the setting to “In/In” when connecting
GP-310B/320B and a wind sensor.
When connecting the GP-310B/320B
and a wind sensor, first turn on “GPS
WAAS” (in the Installation menu) and
then select “In/In” as the NMEA port
setting.
1. Turn on the power while pressing
and holding down the [MENU/ESC]
key. Continue pressing the
[MENU/ESC] key until the
Installation menu appears.
2. Choose NMEA PORT, and then
press to display the NMEA port
options window.
3. Use or to choose In/Out or
In/In as appropriate.
In/Out: Input and Output (default
setting)
In/In: Input only (Available with
connection of the GP-310B/320B
and a wind sensor.)
4. Press , choose NMEA MIX, and
then press to display the NMEA
MIX options window.
5. Use or to choose Off or On.
Choose On to output input data.
Off: Outputs the data sentences of
LS-4100 only.
On: Outputs the data sentences of
LS-4100 and sentences which are
input from other equipment.
6. To restore normal operation, turn off
the power and then turn it on again.
42

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Furuno LS-4100 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Furuno LS-4100 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info